lkml.org 
[lkml]   [2018]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] arm64: allwinner: a64: Add Amarula A64-Relic initial support
On Tue, May 22, 2018 at 06:52:28PM +0530, Jagan Teki wrote:
> Amarula A64-Relic is Allwinner A64 based IoT device, which support
> - Allwinner A64 Cortex-A53
> - Mali-400MP2 GPU
> - AXP803 PMIC
> - 1GB DDR3 RAM
> - 8GB eMMC
> - AP6330 Wifi/BLE
> - MIPI-DSI
> - CSI: OV5640 sensor
> - USB OTG

You claim that this is doing OTG...

[..]

> +&usb_otg {
> + dr_mode = "peripheral";
> + status = "okay";
> +};

... and yet you're setting it as peripheral...

> +&usbphy {
> + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
> + usb0_vbus-supply = <&reg_drivevbus>;

While you have an ID pin and a controllable VBUS. Which one is it?

Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-05-22 16:31    [W:0.045 / U:3.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site