lkml.org 
[lkml]   [2018]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 3/6] dt-bindings: clock: renesas,rzn1-clocks: document RZ/N1 clock driver
Date
The Renesas RZ/N1 Family (Part #R9A06G0xx) requires a driver
to provide the SoC clock infrastructure for Linux.

This documents the driver bindings.

Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com>
---
.../bindings/clock/renesas,rzn1-clocks.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/renesas,rzn1-clocks.txt

diff --git a/Documentation/devicetree/bindings/clock/renesas,rzn1-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rzn1-clocks.txt
new file mode 100644
index 0000000..0c41137
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rzn1-clocks.txt
@@ -0,0 +1,44 @@
+* Renesas RZ/N1 Clock Driver
+
+This driver provides the clock infrastructure used by all the other drivers.
+
+One of the 'special' feature of this infrastructure is that Linux doesn't
+necessary 'own' all the clocks on the SoC, some other OS runs on
+the Cortex-M3 core and that OS can access and claim it's own clocks.
+
+Required Properties:
+
+ - compatible: Must be
+ - "renesas,r9a06g032-clocks" for the RZ/N1D
+ and "renesas,rzn1-clocks" as a fallback.
+ - reg: Base address and length of the memory resource used by the driver
+ - #clock-cells: Must be 1
+
+Examples
+--------
+
+ - Clock driver device node:
+
+ clock: clocks@4000c000 {
+ compatible = "renesas,r9a06g032-clocks",
+ "renesas,rzn1-clocks";
+ reg = <0x4000c000 0x1000>;
+ status = "okay";
+ #clock-cells = <1>;
+ };
+
+
+ - Other drivers can use the clocks as in:
+
+ uart0: serial@40060000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40060000 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&clock RZN1_CLK_UART0>;
+ clock-names = "baudclk";
+ };
+ Note the use of RZN1_CLK_UART0 -- these constants are declared in
+ the rzn1-clocks.h header file. These are not hardware based constants
+ and are Linux specific.
--
2.7.4
\
 
 \ /
  Last update: 2018-05-22 12:16    [W:0.123 / U:2.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site