lkml.org 
[lkml]   [2018]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 14/16] arm64: dts: marvell: add AP806 SEI subnode
Date
Add the System Error Interrupt node, representing an IRQ chip which is
part of the GIC. The SEI node has two subnodes, one for each interrupt
domain: wired (from the AP) and not-wired (MSIs from the CPs).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 176e38d54872..40204a3b893a 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -124,6 +124,25 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};

+ sei: sei@3f0200 {
+ compatible = "marvell,armada-8k-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sei_wired_controller: sei-wired-controller {
+ marvell,sei-ranges = <0 21>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+
+ sei_msi_controller: sei-msi-controller {
+ marvell,sei-ranges = <21 43>;
+ msi-controller;
+ };
+ };
+
xor@400000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x400000 0x1000>,
--
2.14.1
\
 
 \ /
  Last update: 2018-05-22 11:42    [W:0.112 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site