lkml.org 
[lkml]   [2018]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/5] PCI/AER: Add sysfs stats for AER capable devices
On Tue, May 22, 2018 at 3:50 PM, Alex G. <mr.nuke.me@gmail.com> wrote:
>
>
> On 05/22/2018 05:28 PM, Rajat Jain wrote:
>> Add the following AER sysfs stats to represent the counters for each
>> kind of error as seen by the device:
>>
>> dev_total_cor_errs
>> dev_total_fatal_errs
>> dev_total_nonfatal_errs
>>
>> Signed-off-by: Rajat Jain <rajatja@google.com>
>> ---
>> drivers/pci/pci-sysfs.c | 3 ++
>> drivers/pci/pci.h | 4 +-
>> drivers/pci/pcie/aer/aerdrv.h | 1 +
>> drivers/pci/pcie/aer/aerdrv_errprint.c | 1 +
>> drivers/pci/pcie/aer/aerdrv_stats.c | 72 ++++++++++++++++++++++++++
>> 5 files changed, 80 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
>> index 366d93af051d..730f985a3dc9 100644
>> --- a/drivers/pci/pci-sysfs.c
>> +++ b/drivers/pci/pci-sysfs.c
>> @@ -1743,6 +1743,9 @@ static const struct attribute_group *pci_dev_attr_groups[] = {
>> #endif
>> &pci_bridge_attr_group,
>> &pcie_dev_attr_group,
>> +#ifdef CONFIG_PCIEAER
>> + &aer_stats_attr_group,
>> +#endif
>> NULL,
>> };
>
> So if the device is removed as part of recovery, then these get reset,
> right? So if the device fails intermittently, these counters would keep
> getting reset. Is this the intent?

Umm, kind of.
* One argument is that if a PCI device is removed and then
re-enumerated, how do we know it is the same device and has not been
replaced by another device for e.g.? Note that the root port counters
that have the cumulative counters for all the errors seen will still
have them logged in the situation you describe.

>
> (snip)
>
>> /**
>> * pci_match_one_device - Tell if a PCI device structure has a matching
>> diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
>> index d8b9fba536ed..b5d5ad6f2c03 100644
>> --- a/drivers/pci/pcie/aer/aerdrv.h
>> +++ b/drivers/pci/pcie/aer/aerdrv.h
>> @@ -87,6 +87,7 @@ void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info);
>> irqreturn_t aer_irq(int irq, void *context);
>> int pci_aer_stats_init(struct pci_dev *pdev);
>> void pci_aer_stats_exit(struct pci_dev *pdev);
>> +void pci_dev_aer_stats_incr(struct pci_dev *pdev, struct aer_err_info *info);
>>
>> #ifdef CONFIG_ACPI_APEI
>> int pcie_aer_get_firmware_first(struct pci_dev *pci_dev);
>> diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c
>> index 21ca5e1b0ded..5e8b98deda08 100644
>> --- a/drivers/pci/pcie/aer/aerdrv_errprint.c
>> +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
>> @@ -155,6 +155,7 @@ static void __aer_print_error(struct pci_dev *dev,
>> pci_err(dev, " [%2d] Unknown Error Bit%s\n",
>> i, info->first_error == i ? " (First)" : "");
>> }
>> + pci_dev_aer_stats_incr(dev, info);
>
> What about AER errors that are contained by DPC?

Thanks, You are right, this patch does not take care of the DPC. I'll
try to read up on DPC and can integrate it if it turns out to be easy
enough.

Thanks,

Rajat

>
> Alex

\
 
 \ /
  Last update: 2018-05-23 01:28    [W:0.070 / U:3.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site