lkml.org 
[lkml]   [2018]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.16 030/110] ARM64: dts: marvell: armada-cp110: Add mg_core_clk for ethernet node
Date
4.16-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxime Chevallier <maxime.chevallier@bootlin.com>

commit f43194c1447c9536efb0859c2f3f46f6bf2b9154 upstream.

Marvell PPv2.2 controller present on CP-110 need the extra "mg_core_clk"
clock to avoid system hangs when powering some network interfaces up.

This issue appeared after a recent clock rework on Armada 7K/8K platforms.

This commit adds the new clock and updates the documentation accordingly.

[gregory.clement: use the real first commit to fix and add the cc:stable
flag]
Fixes: e3af9f7c6ece ("RM64: dts: marvell: armada-cp110: Fix clock resources for various node")
Cc: <stable@vger.kernel.org>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
Documentation/devicetree/bindings/net/marvell-pp2.txt | 9 +++++----
arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 5 +++--
2 files changed, 8 insertions(+), 6 deletions(-)

--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -21,9 +21,10 @@ Required properties:
- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
- MG clock (only for armada-7k-pp2)
+ - MG Core clock (only for armada-7k-pp2)
- AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
- and "axi_clk" (the 2 latter only for armada-7k-pp2).
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
+ "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).

The ethernet ports are represented by subnodes. At least one port is
required.
@@ -80,8 +81,8 @@ cpm_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
- <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
- clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
+ <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";

eth0: eth0 {
interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -40,9 +40,10 @@
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
- <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 18>;
+ <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
+ <&CP110_LABEL(clk) 1 18>;
clock-names = "pp_clk", "gop_clk",
- "mg_clk", "axi_clk";
+ "mg_clk", "mg_core_clk", "axi_clk";
marvell,system-controller = <&CP110_LABEL(syscon0)>;
status = "disabled";
dma-coherent;

\
 
 \ /
  Last update: 2018-05-21 23:44    [W:0.603 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site