lkml.org 
[lkml]   [2018]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [v4 10/11] drivers/hwmon: Add PECI dimmtemp driver
From
Date
On 5/21/2018 1:39 PM, Guenter Roeck wrote:
> On Mon, May 21, 2018 at 01:00:02PM -0700, Jae Hyun Yoo wrote:
>> This commit adds PECI dimmtemp hwmon driver.
>>
>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
>> Reviewed-by: James Feist <james.feist@linux.intel.com>
>> Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
>> Cc: Alan Cox <alan@linux.intel.com>
>> Cc: Andrew Jeffery <andrew@aj.id.au>
>> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>> Cc: Arnd Bergmann <arnd@arndb.de>
>> Cc: Jason M Biils <jason.m.bills@linux.intel.com>
>> Cc: Joel Stanley <joel@jms.id.au>
>> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
>> Cc: Andrew Lunn <andrew@lunn.ch>
>> Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
>> ---
>> drivers/hwmon/Kconfig | 14 ++
>> drivers/hwmon/Makefile | 1 +
>> drivers/hwmon/peci-dimmtemp.c | 300 ++++++++++++++++++++++++++++++++++
>> 3 files changed, 315 insertions(+)
>> create mode 100644 drivers/hwmon/peci-dimmtemp.c
>>
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>> index 8492586bb1e4..6ce5c03ec544 100644
>> --- a/drivers/hwmon/Kconfig
>> +++ b/drivers/hwmon/Kconfig
>> @@ -1270,6 +1270,20 @@ config SENSORS_PECI_CPUTEMP
>> This driver can also be built as a module. If so, the module
>> will be called peci-cputemp.
>>
>> +config SENSORS_PECI_DIMMTEMP
>> + tristate "PECI DIMM temperature monitoring support"
>> + depends on OF
>> + depends on PECI
>> + help
>> + If you say yes here you get support for the generic Intel PECI hwmon
>> + driver which provides Digital Thermal Sensor (DTS) thermal readings of
>> + DIMM components that are accessible using the PECI Client Command
>> + Suite via the processor PECI client.
>> + Check Documentation/hwmon/peci-dimmtemp for details.
>> +
>> + This driver can also be built as a module. If so, the module
>> + will be called peci-dimmtemp.
>> +
>> config SENSORS_NSA320
>> tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
>> depends on GPIOLIB && OF
>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>> index d18b374a9000..1662bbe08ea9 100644
>> --- a/drivers/hwmon/Makefile
>> +++ b/drivers/hwmon/Makefile
>> @@ -137,6 +137,7 @@ obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
>> obj-$(CONFIG_SENSORS_NSA320) += nsa320-hwmon.o
>> obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
>> obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o peci-hwmon.o
>> +obj-$(CONFIG_SENSORS_PECI_DIMMTEMP) += peci-dimmtemp.o peci-hwmon.o
>> obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
>> obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
>> obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
>> diff --git a/drivers/hwmon/peci-dimmtemp.c b/drivers/hwmon/peci-dimmtemp.c
>> new file mode 100644
>> index 000000000000..898de1c38e55
>> --- /dev/null
>> +++ b/drivers/hwmon/peci-dimmtemp.c
>> @@ -0,0 +1,300 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2018 Intel Corporation
>> +
>> +#include <linux/hwmon.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/workqueue.h>
>> +
>> +#include "peci-hwmon.h"
>> +
>> +#define DIMM_MASK_CHECK_DELAY_JIFFIES msecs_to_jiffies(5000)
>> +#define DIMM_MASK_CHECK_RETRY_MAX 60 /* 60 x 5 secs = 5 minutes */
>> +
>> +struct peci_dimmtemp {
>> + struct peci_client *client;
>> + struct device *dev;
>> + struct workqueue_struct *work_queue;
>> + struct delayed_work work_handler;
>> + char name[PECI_NAME_SIZE];
>> + struct temp_data temp[DIMM_NUMS_MAX];
>> + u8 addr;
>> + uint cpu_no;
>> + const struct cpu_gen_info *gen_info;
>> + u32 dimm_mask;
>> + int retry_count;
>> + u32 temp_config[DIMM_NUMS_MAX + 1];
>> + struct hwmon_channel_info temp_info;
>> + const struct hwmon_channel_info *info[2];
>> + struct hwmon_chip_info chip;
>> +};
>> +
>> +static const char *dimmtemp_label[CHAN_RANK_MAX][DIMM_IDX_MAX] = {
>> + { "DIMM A0", "DIMM A1", "DIMM A2" },
>> + { "DIMM B0", "DIMM B1", "DIMM B2" },
>> + { "DIMM C0", "DIMM C1", "DIMM C2" },
>> + { "DIMM D0", "DIMM D1", "DIMM D2" },
>> + { "DIMM E0", "DIMM E1", "DIMM E2" },
>> + { "DIMM F0", "DIMM F1", "DIMM F2" },
>> + { "DIMM G0", "DIMM G1", "DIMM G2" },
>> + { "DIMM H0", "DIMM H1", "DIMM H2" },
>> +};
>> +
>> +static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no)
>> +{
>> + int dimm_order = dimm_no % priv->gen_info->dimm_idx_max;
>> + int chan_rank = dimm_no / priv->gen_info->dimm_idx_max;
>> + u8 cfg_data[4];
>> + int rc;
>> +
>> + if (!peci_hwmon_need_update(&priv->temp[dimm_no]))
>> + return 0;
>
> Quick feedback:
>
> This function is defined in peci-hwmon.c, which is built only if
> SENSORS_PECI_CPUTEMP is enabled (though as a separate module).
> I would suggest to add a separate auto-selected configuration
> flag such as SENSORS_PECI_HWMON for peci-hwmon.c and select it
> from both SENSORS_PECI_CPUTEMP and SENSORS_PECI_DIMMTEMP.
>
> Guenter
>

Yes, that makes sense. I'll change it as you suggested. Thanks a lot!

-Jae

>> +
>> + rc = peci_hwmon_rd_pkg_cfg_cmd(priv->client->adapter, priv->addr,
>> + MBX_INDEX_DDR_DIMM_TEMP,
>> + chan_rank, cfg_data);
>> + if (rc)
>> + return rc;
>> +
>> + priv->temp[dimm_no].value = cfg_data[dimm_order] * 1000;
>> +
>> + peci_hwmon_mark_updated(&priv->temp[dimm_no]);
>> +
>> + return 0;
>> +}
>> +
>> +static int dimmtemp_read_string(struct device *dev,
>> + enum hwmon_sensor_types type,
>> + u32 attr, int channel, const char **str)
>> +{
>> + struct peci_dimmtemp *priv = dev_get_drvdata(dev);
>> + u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
>> + int chan_rank, dimm_idx;
>> +
>> + if (attr != hwmon_temp_label)
>> + return -EOPNOTSUPP;
>> +
>> + chan_rank = channel / dimm_idx_max;
>> + dimm_idx = channel % dimm_idx_max;
>> + *str = dimmtemp_label[chan_rank][dimm_idx];
>> + return 0;
>> +}
>> +
>> +static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types type,
>> + u32 attr, int channel, long *val)
>> +{
>> + struct peci_dimmtemp *priv = dev_get_drvdata(dev);
>> + int rc;
>> +
>> + if (attr != hwmon_temp_input)
>> + return -EOPNOTSUPP;
>> +
>> + rc = get_dimm_temp(priv, channel);
>> + if (rc)
>> + return rc;
>> +
>> + *val = priv->temp[channel].value;
>> + return 0;
>> +}
>> +
>> +static umode_t dimmtemp_is_visible(const void *data,
>> + enum hwmon_sensor_types type,
>> + u32 attr, int channel)
>> +{
>> + const struct peci_dimmtemp *priv = data;
>> +
>> + if (priv->temp_config[channel] & BIT(attr) &&
>> + priv->dimm_mask & BIT(channel))
>> + return 0444;
>> +
>> + return 0;
>> +}
>> +
>> +static const struct hwmon_ops dimmtemp_ops = {
>> + .is_visible = dimmtemp_is_visible,
>> + .read_string = dimmtemp_read_string,
>> + .read = dimmtemp_read,
>> +};
>> +
>> +static int check_populated_dimms(struct peci_dimmtemp *priv)
>> +{
>> + u32 chan_rank_max = priv->gen_info->chan_rank_max;
>> + u32 dimm_idx_max = priv->gen_info->dimm_idx_max;
>> + int chan_rank, dimm_idx, rc;
>> + u8 cfg_data[4];
>> +
>> + for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) {
>> + rc = peci_hwmon_rd_pkg_cfg_cmd(priv->client->adapter,
>> + priv->addr,
>> + MBX_INDEX_DDR_DIMM_TEMP,
>> + chan_rank, cfg_data);
>> + if (rc) {
>> + priv->dimm_mask = 0;
>> + return rc;
>> + }
>> +
>> + for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++)
>> + if (cfg_data[dimm_idx])
>> + priv->dimm_mask |= BIT(chan_rank *
>> + chan_rank_max +
>> + dimm_idx);
>> + }
>> +
>> + if (!priv->dimm_mask)
>> + return -EAGAIN;
>> +
>> + dev_dbg(priv->dev, "Scanned populated DIMMs: 0x%x\n", priv->dimm_mask);
>> + return 0;
>> +}
>> +
>> +static int create_dimm_temp_info(struct peci_dimmtemp *priv)
>> +{
>> + int rc, i, config_idx, channels;
>> + struct device *hwmon_dev;
>> +
>> + rc = check_populated_dimms(priv);
>> + if (rc) {
>> + if (rc == -EAGAIN) {
>> + if (priv->retry_count < DIMM_MASK_CHECK_RETRY_MAX) {
>> + queue_delayed_work(priv->work_queue,
>> + &priv->work_handler,
>> + DIMM_MASK_CHECK_DELAY_JIFFIES);
>> + priv->retry_count++;
>> + dev_dbg(priv->dev,
>> + "Deferred DIMM temp info creation\n");
>> + } else {
>> + dev_err(priv->dev,
>> + "Timeout DIMM temp info creation\n");
>> + rc = -ETIMEDOUT;
>> + }
>> + }
>> +
>> + return rc;
>> + }
>> +
>> + channels = priv->gen_info->chan_rank_max *
>> + priv->gen_info->dimm_idx_max;
>> + for (i = 0, config_idx = 0; i < channels; i++)
>> + if (priv->dimm_mask & BIT(i))
>> + while (i >= config_idx)
>> + priv->temp_config[config_idx++] =
>> + HWMON_T_LABEL | HWMON_T_INPUT;
>> +
>> + priv->chip.ops = &dimmtemp_ops;
>> + priv->chip.info = priv->info;
>> +
>> + priv->info[0] = &priv->temp_info;
>> +
>> + priv->temp_info.type = hwmon_temp;
>> + priv->temp_info.config = priv->temp_config;
>> +
>> + hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
>> + priv->name,
>> + priv,
>> + &priv->chip,
>> + NULL);
>> + rc = PTR_ERR_OR_ZERO(hwmon_dev);
>> + if (!rc)
>> + dev_dbg(priv->dev, "%s: sensor '%s'\n",
>> + dev_name(hwmon_dev), priv->name);
>> +
>> + return rc;
>> +}
>> +
>> +static void create_dimm_temp_info_delayed(struct work_struct *work)
>> +{
>> + struct delayed_work *dwork = to_delayed_work(work);
>> + struct peci_dimmtemp *priv = container_of(dwork, struct peci_dimmtemp,
>> + work_handler);
>> + int rc;
>> +
>> + rc = create_dimm_temp_info(priv);
>> + if (rc && rc != -EAGAIN)
>> + dev_dbg(priv->dev, "Failed to create DIMM temp info\n");
>> +}
>> +
>> +static int peci_dimmtemp_probe(struct peci_client *client)
>> +{
>> + struct device *dev = &client->dev;
>> + struct peci_dimmtemp *priv;
>> + int rc;
>> +
>> + if ((client->adapter->cmd_mask &
>> + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
>> + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
>> + return -ENODEV;
>> +
>> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + dev_set_drvdata(dev, priv);
>> + priv->client = client;
>> + priv->dev = dev;
>> + priv->addr = client->addr;
>> + priv->cpu_no = priv->addr - PECI_BASE_ADDR;
>> +
>> + snprintf(priv->name, PECI_NAME_SIZE, "peci_dimmtemp.cpu%d",
>> + priv->cpu_no);
>> +
>> + rc = peci_hwmon_get_cpu_gen_info(client->adapter, priv->addr,
>> + &priv->gen_info);
>> + if (rc)
>> + return rc;
>> +
>> + priv->work_queue = alloc_ordered_workqueue(priv->name, 0);
>> + if (!priv->work_queue)
>> + return -ENOMEM;
>> +
>> + INIT_DELAYED_WORK(&priv->work_handler, create_dimm_temp_info_delayed);
>> +
>> + rc = create_dimm_temp_info(priv);
>> + if (rc && rc != -EAGAIN) {
>> + dev_err(dev, "Failed to create DIMM temp info\n");
>> + goto err_free_wq;
>> + }
>> +
>> + return 0;
>> +
>> +err_free_wq:
>> + destroy_workqueue(priv->work_queue);
>> + return rc;
>> +}
>> +
>> +static int peci_dimmtemp_remove(struct peci_client *client)
>> +{
>> + struct peci_dimmtemp *priv = dev_get_drvdata(&client->dev);
>> +
>> + cancel_delayed_work_sync(&priv->work_handler);
>> + destroy_workqueue(priv->work_queue);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id peci_dimmtemp_of_table[] = {
>> + { .compatible = "intel,peci-dimmtemp" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, peci_dimmtemp_of_table);
>> +
>> +static const struct peci_device_id peci_dimmtemp_ids[] = {
>> + { "peci-dimmtemp", 0, },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(peci, peci_dimmtemp_ids);
>> +
>> +static struct peci_driver peci_dimmtemp_driver = {
>> + .probe = peci_dimmtemp_probe,
>> + .remove = peci_dimmtemp_remove,
>> + .id_table = peci_dimmtemp_ids,
>> + .driver = {
>> + .name = "peci-dimmtemp",
>> + .of_match_table = of_match_ptr(peci_dimmtemp_of_table),
>> + },
>> +};
>> +module_peci_driver(peci_dimmtemp_driver);
>> +
>> +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
>> +MODULE_DESCRIPTION("PECI dimmtemp driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.17.0
>>

\
 
 \ /
  Last update: 2018-05-21 22:47    [W:0.062 / U:2.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site