lkml.org 
[lkml]   [2018]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 02/29] venus: hfi: preparation to support venus 4xx
From
Date
Hi Tomasz,

Thanks for the comments!

On 05/18/2018 12:44 PM, Tomasz Figa wrote:
> Hi Stanimir,
>
> On Tue, May 15, 2018 at 5:14 PM Stanimir Varbanov <
> stanimir.varbanov@linaro.org> wrote:
>
>> This covers the differences between 1xx,3xx and 4xx.
>
>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
>> ---
>> drivers/media/platform/qcom/venus/core.h | 4 ++
>> drivers/media/platform/qcom/venus/helpers.c | 37 +++++++----
>> drivers/media/platform/qcom/venus/hfi_helper.h | 84
> ++++++++++++++++++++++--
>> drivers/media/platform/qcom/venus/hfi_venus_io.h | 24 +++++++
>> drivers/media/platform/qcom/venus/vdec.c | 5 +-
>> drivers/media/platform/qcom/venus/venc.c | 5 +-
>> 6 files changed, 137 insertions(+), 22 deletions(-)
>
> Please see my comments inline.
>
> [snip]
>
>> @@ -257,12 +273,11 @@ static int load_scale_clocks(struct venus_core
> *core)
>
>> set_freq:
>
>> - if (core->res->hfi_version == HFI_VERSION_3XX) {
>> - ret = clk_set_rate(clk, freq);
>> + ret = clk_set_rate(clk, freq);
>> +
>> + if (IS_V3(core) || IS_V4(core)) {
>> ret |= clk_set_rate(core->core0_clk, freq);
>> ret |= clk_set_rate(core->core1_clk, freq);
>> - } else {
>> - ret = clk_set_rate(clk, freq);
>> }
>
> nit: The clock API defines NULL clock as a special no-op value and so
> clk_set_rate(NULL, ...) would return 0 instantly. Maybe it would just make
> sense to have core0_clk and core1_clk set to NULL for V1 and remove the
> condition here?

OK, we could avoid the condition but I'll add a comment that those
clocks exist from v3 onwards.

>
>> if (ret) {
>> diff --git a/drivers/media/platform/qcom/venus/hfi_helper.h
> b/drivers/media/platform/qcom/venus/hfi_helper.h
>> index 55d8eb21403a..1bc5aab1ce6b 100644
>> --- a/drivers/media/platform/qcom/venus/hfi_helper.h
>> +++ b/drivers/media/platform/qcom/venus/hfi_helper.h
>> @@ -121,6 +121,7 @@
>> #define HFI_EXTRADATA_METADATA_FILLER 0x7fe00002
>
>> #define HFI_INDEX_EXTRADATA_INPUT_CROP 0x0700000e
>> +#define HFI_INDEX_EXTRADATA_OUTPUT_CROP 0x0700000f
>
> nit: Would it make sense to suffix this _4XX, so that reader could know
> that it was introduced in this version? Similarly for other newly added
> definitions.

I personally don't like the version suffix on defines. Also seems this
is not used in the code, so I'll drop it for now.

>
>> #define HFI_INDEX_EXTRADATA_DIGITAL_ZOOM 0x07000010
>> #define HFI_INDEX_EXTRADATA_ASPECT_RATIO 0x7f100003
>
>> @@ -376,13 +377,18 @@
>> #define HFI_BUFFER_OUTPUT2 0x3
>> #define HFI_BUFFER_INTERNAL_PERSIST 0x4
>> #define HFI_BUFFER_INTERNAL_PERSIST_1 0x5
>> -#define HFI_BUFFER_INTERNAL_SCRATCH 0x1000001
>> -#define HFI_BUFFER_EXTRADATA_INPUT 0x1000002
>> -#define HFI_BUFFER_EXTRADATA_OUTPUT 0x1000003
>> -#define HFI_BUFFER_EXTRADATA_OUTPUT2 0x1000004
>> -#define HFI_BUFFER_INTERNAL_SCRATCH_1 0x1000005
>> -#define HFI_BUFFER_INTERNAL_SCRATCH_2 0x1000006
>> -
>> +#define HFI_BUFFER_INTERNAL_SCRATCH(ver) \
>> + (((ver) == HFI_VERSION_4XX) ? 0x6 : 0x1000001)
>> +#define HFI_BUFFER_INTERNAL_SCRATCH_1(ver) \
>> + (((ver) == HFI_VERSION_4XX) ? 0x7 : 0x1000005)
>> +#define HFI_BUFFER_INTERNAL_SCRATCH_2(ver) \
>> + (((ver) == HFI_VERSION_4XX) ? 0x8 : 0x1000006)
>> +#define HFI_BUFFER_EXTRADATA_INPUT(ver) \
>> + (((ver) == HFI_VERSION_4XX) ? 0xc : 0x1000002)
>> +#define HFI_BUFFER_EXTRADATA_OUTPUT(ver) \
>> + (((ver) == HFI_VERSION_4XX) ? 0xa : 0x1000003)
>> +#define HFI_BUFFER_EXTRADATA_OUTPUT2(ver) \
>> + (((ver) == HFI_VERSION_4XX) ? 0xb : 0x1000004)
>
> nit: Does it make sense to add an argument, rather than simply defining
> separate HFI_BUFFER_INTERNAL_SCRATCH_1XX and
> HFI_BUFFER_INTERNAL_SCRATCH_4XX? In my subjective opinion, the argument

I'd like to keep the name of the define version agnostic.

> just makes it harder to read, as it's not clear how it is used inside the
> macro from reading just the call to it. Also it would get messy when adding
> further variants in future.
>
> [snip]
>
>> +/* HFI 4XX reorder the fields, use these macros */
>> +#define HFI_BUFREQ_HOLD_COUNT(bufreq, ver) \
>> + ((ver) == HFI_VERSION_4XX ? 0 : (bufreq)->hold_count)
>> +#define HFI_BUFREQ_COUNT_MIN(bufreq, ver) \
>> + ((ver) == HFI_VERSION_4XX ? (bufreq)->hold_count :
> (bufreq)->count_min)
>> +#define HFI_BUFREQ_COUNT_MIN_HOST(bufreq, ver) \
>> + ((ver) == HFI_VERSION_4XX ? (bufreq)->count_min : 0)
>> +
>
> Hmm, this is a bit messy. The macro is supposed to return count_min, but it
> returns hold_count. Shouldn't we define a separate

yep, that was the purpose of the macro, i.e. to swap the fields
depending on the version.

> hfi_buffer_requirements_4xx struct for 4XX?

With above macros I wanted to avoid that. We already have few structures
with 3x prefix and I want to stop that growing.

>
> Even though this seems to simplify the code eventually, I think it might be
> quite confusing for anyone working with the driver in the future.

It is a matter of taste in the end of the day.

>
> Also HFI_BUFREQ_HOLD_COUNT and HFI_BUFREQ_COUNT_MIN_HOST don't seem to be
> used anywhere.

yes, they are here for completeness ;)

>
> [snip]
>
>> +/* vcodec noc error log registers */
>> +#define VCODEC_CORE0_VIDEO_NOC_BASE_OFFS 0x4000
>> +#define VCODEC_CORE1_VIDEO_NOC_BASE_OFFS 0xc000
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_SWID_LOW_OFFS 0x500
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_SWID_HIGH_OFFS 0x504
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_MAINCTL_LOW_OFFS 0x508
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_ERRVLD_LOW_OFFS 0x510
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_ERRCLR_LOW_OFFS 0x518
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_ERRLOG0_LOW_OFFS 0x520
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_ERRLOG0_HIGH_OFFS 0x524
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_ERRLOG1_LOW_OFFS 0x528
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_ERRLOG1_HIGH_OFFS 0x52c
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_ERRLOG2_LOW_OFFS 0x530
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_ERRLOG2_HIGH_OFFS 0x534
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_ERRLOG3_LOW_OFFS 0x538
>> +#define VCODEC_COREX_VIDEO_NOC_ERR_ERRLOG3_HIGH_OFFS 0x53c
>
> What are these offsets from?

Those registers are used in donwstream driver for debug purpose. In case
iommu fault is triggered dumping these registers could give us a clue
what goes wrong.

>
> nit: Other registers seem to be defined as (xxx_BASE + offset). Is there
> any reason to define these in another way?

For example the first register in the list is a BASE address for core0.
Next _COREX_ are offsets from the base.

Looks these registers are not used in this patchset I'll drop them for now.

>
>> +
>> #endif
>> diff --git a/drivers/media/platform/qcom/venus/vdec.c
> b/drivers/media/platform/qcom/venus/vdec.c
>> index 49bbd1861d3a..261a51adeef2 100644
>> --- a/drivers/media/platform/qcom/venus/vdec.c
>> +++ b/drivers/media/platform/qcom/venus/vdec.c
>> @@ -689,6 +689,7 @@ static int vdec_queue_setup(struct vb2_queue *q,
>
>> static int vdec_verify_conf(struct venus_inst *inst)
>> {
>> + enum hfi_version ver = inst->core->res->hfi_version;
>> struct hfi_buffer_requirements bufreq;
>> int ret;
>
>> @@ -700,14 +701,14 @@ static int vdec_verify_conf(struct venus_inst *inst)
>> return ret;
>
>> if (inst->num_output_bufs < bufreq.count_actual ||
>> - inst->num_output_bufs < bufreq.count_min)
>> + inst->num_output_bufs < HFI_BUFREQ_COUNT_MIN(&bufreq, ver))
>> return -EINVAL;
>
>> ret = venus_helper_get_bufreq(inst, HFI_BUFFER_INPUT, &bufreq);
>> if (ret)
>> return ret;
>
>> - if (inst->num_input_bufs < bufreq.count_min)
>> + if (inst->num_input_bufs < HFI_BUFREQ_COUNT_MIN(&bufreq, ver))
>> return -EINVAL;
>
> Back to the point I raised above, maybe we could make
> venus_helper_get_bufreq() untangle the order of fields for 4XX? It seems to
> do a memcpy anyway, so doing it field by field for such small struct
> shouldn't really matter.

That couldn't happen because the structure fields are not only reordered
but also renamed.

1xx and 3xx vs. 4xx

hold_count count_min
count_min count_min_host
count_actual count_actual

--
regards,
Stan

\
 
 \ /
  Last update: 2018-05-21 16:25    [W:0.078 / U:2.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site