lkml.org 
[lkml]   [2018]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] cpufreq: Add Kryo CPU scaling driver
Date


> -----Original Message-----
> From: Sudeep Holla <sudeep.holla@arm.com>
> Sent: Monday, May 21, 2018 15:50
> To: Ilia Lin <ilialin@codeaurora.org>; mturquette@baylibre.com;
> sboyd@kernel.org; robh@kernel.org; mark.rutland@arm.com;
> viresh.kumar@linaro.org; nm@ti.com; lgirdwood@gmail.com;
> broonie@kernel.org; andy.gross@linaro.org; david.brown@linaro.org;
> catalin.marinas@arm.com; will.deacon@arm.com; rjw@rjwysocki.net; linux-
> clk@vger.kernel.org
> Cc: Sudeep Holla <sudeep.holla@arm.com>; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; linux-pm@vger.kernel.org; linux-arm-
> msm@vger.kernel.org; linux-soc@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; rnayak@codeaurora.org;
> amit.kucheria@linaro.org; nicolas.dechesne@linaro.org;
> celster@codeaurora.org; tfinkel@codeaurora.org
> Subject: Re: [PATCH] cpufreq: Add Kryo CPU scaling driver
>
>
>
> On 19/05/18 12:35, Ilia Lin wrote:
> > In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO
> > processors, the CPU frequency subset and voltage value of each OPP
> > varies based on the silicon variant in use. Qualcomm Process Voltage
> > Scaling Tables defines the voltage and frequency value based on the
> > msm-id in SMEM and speedbin blown in the efuse combination.
> > The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the
> > SoC to provide the OPP framework with required information.
> > This is used to determine the voltage and frequency value for each OPP
> > of
> > operating-points-v2 table when it is parsed by the OPP framework.
> >
> > Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> > drivers/cpufreq/Kconfig.arm | 10 +++
> > drivers/cpufreq/Makefile | 1 +
> > drivers/cpufreq/cpufreq-dt-platdev.c | 3 +
> > drivers/cpufreq/qcom-cpufreq-kryo.c | 164
> > +++++++++++++++++++++++++++++++++++
> > 4 files changed, 178 insertions(+)
> > create mode 100644 drivers/cpufreq/qcom-cpufreq-kryo.c
> >
>
> [..]
>
> > +
> > +/*
> > + * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO
> > +processors,
> > + * the CPU frequency subset and voltage value of each OPP varies
> > + * based on the silicon variant in use. Qualcomm Process Voltage
> > +Scaling Tables
> > + * defines the voltage and frequency value based on the msm-id in
> > +SMEM
> > + * and speedbin blown in the efuse combination.
> > + * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from
> > +the SoC
> > + * to provide the OPP framework with required information.
> > + * This is used to determine the voltage and frequency value for each
> > +OPP of
> > + * operating-points-v2 table when it is parsed by the OPP framework.
> > + */
> > +
> > +#include <linux/cpu.h>
> > +#include <linux/err.h>
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_opp.h>
> > +#include <linux/slab.h>
> > +#include <linux/soc/qcom/smem.h>
> > +
> > +#define MSM_ID_SMEM 137
> > +#define SILVER_LEAD 0
> > +#define GOLD_LEAD 2
> > +
>
> So I gather form other emails, that these are physical cpu number(not even
> unique identifier like MPIDR). Will this work on parts or platforms that need
> to boot in GOLD LEAD cpus.

The driver is for Kryo CPU, which (and AFAIK all multicore MSMs) always boots on the CPU0.

>
> [...]
>
> > +
> > +static int __init qcom_cpufreq_kryo_driver_init(void)
> > +{
> > + struct device *cpu_dev_silver, *cpu_dev_gold;
> > + struct opp_table *opp_silver, *opp_gold;
> > + enum _msm8996_version msm8996_version;
> > + struct nvmem_cell *speedbin_nvmem;
> > + struct platform_device *pdev;
> > + struct device_node *np;
> > + u8 *speedbin;
> > + u32 versions;
> > + size_t len;
> > + int ret;
> > +
> > + cpu_dev_silver = get_cpu_device(SILVER_LEAD);
> > + if (IS_ERR_OR_NULL(cpu_dev_silver))
> > + return PTR_ERR(cpu_dev_silver);
> > +
> > + cpu_dev_gold = get_cpu_device(SILVER_LEAD);
>
> s/SILVER/GOLD/ ?

Yes, you are right. This is already fixed in the respin.

>
> --
> Regards,
> Sudeep

\
 
 \ /
  Last update: 2018-05-21 14:58    [W:0.086 / U:3.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site