lkml.org 
[lkml]   [2018]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH v1 4/4] sparc/PCI: Use dev_printk() when possible
From
Date
From: Bjorn Helgaas <bhelgaas@google.com>

Use the pci_info() and pci_err() wrappers for dev_printk() when possible.

Log PCI device vendor and device IDs and BAR information in the same format
used by other architectures.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
arch/sparc/kernel/leon_pci.c | 4 --
arch/sparc/kernel/pci.c | 94 +++++++++++++++++++---------------------
arch/sparc/kernel/pci_common.c | 12 +++--
arch/sparc/kernel/pci_msi.c | 10 ++--
arch/sparc/kernel/pcic.c | 29 ++++++------
5 files changed, 70 insertions(+), 79 deletions(-)

diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c
index c2a5033b07c3..fe468ca2eedd 100644
--- a/arch/sparc/kernel/leon_pci.c
+++ b/arch/sparc/kernel/leon_pci.c
@@ -82,9 +82,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
}

if (cmd != oldcmd) {
- printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
- pci_name(dev), cmd);
- /* Enable the appropriate bits in the PCI command register. */
+ pci_info(dev, "enabling device (%04x -> %04x)\n", old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 8a04983cf8a1..6f0408a3ebc9 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -214,8 +214,8 @@ static void pci_parse_of_addrs(struct platform_device *op,
if (!addrs)
return;
if (ofpci_verbose)
- printk(" parse addresses (%d bytes) @ %p\n",
- proplen, addrs);
+ pci_info(dev, " parse addresses (%d bytes) @ %p\n",
+ proplen, addrs);
op_res = &op->resource[0];
for (; proplen >= 20; proplen -= 20, addrs += 5, op_res++) {
struct resource *res;
@@ -227,8 +227,8 @@ static void pci_parse_of_addrs(struct platform_device *op,
continue;
i = addrs[0] & 0xff;
if (ofpci_verbose)
- printk(" start: %llx, end: %llx, i: %x\n",
- op_res->start, op_res->end, i);
+ pci_info(dev, " start: %llx, end: %llx, i: %x\n",
+ op_res->start, op_res->end, i);

if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
@@ -236,13 +236,15 @@ static void pci_parse_of_addrs(struct platform_device *op,
res = &dev->resource[PCI_ROM_RESOURCE];
flags |= IORESOURCE_READONLY | IORESOURCE_SIZEALIGN;
} else {
- printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
+ pci_err(dev, "bad cfg reg num 0x%x\n", i);
continue;
}
res->start = op_res->start;
res->end = op_res->end;
res->flags = flags;
res->name = pci_name(dev);
+
+ pci_info(dev, "reg 0x%x: %pR\n", i, res);
}
}

@@ -289,8 +291,8 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
type = "";

if (ofpci_verbose)
- printk(" create device, devfn: %x, type: %s\n",
- devfn, type);
+ pci_info(bus," create device, devfn: %x, type: %s\n",
+ devfn, type);

dev->sysdata = node;
dev->dev.parent = bus->bridge;
@@ -323,10 +325,6 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));

- if (ofpci_verbose)
- printk(" class: 0x%x device name: %s\n",
- dev->class, pci_name(dev));
-
/* I have seen IDE devices which will not respond to
* the bmdma simplex check reads if bus mastering is
* disabled.
@@ -353,10 +351,13 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
dev->irq = PCI_IRQ_NONE;
}

+ pci_info(dev, "[%04x:%04x] type %02x class %#08x\n",
+ dev->vendor, dev->device, dev->hdr_type, dev->class);
+
pci_parse_of_addrs(sd->op, node, dev);

if (ofpci_verbose)
- printk(" adding to system ...\n");
+ pci_info(dev, " adding to system ...\n");

pci_device_add(dev, bus);

@@ -430,19 +431,19 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
u64 size;

if (ofpci_verbose)
- printk("of_scan_pci_bridge(%s)\n", node->full_name);
+ pci_info(dev, "of_scan_pci_bridge(%s)\n", node->full_name);

/* parse bus-range property */
busrange = of_get_property(node, "bus-range", &len);
if (busrange == NULL || len != 8) {
- printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
+ pci_info(dev, "Can't get bus-range for PCI-PCI bridge %s\n",
node->full_name);
return;
}

if (ofpci_verbose)
- printk(" Bridge bus range [%u --> %u]\n",
- busrange[0], busrange[1]);
+ pci_info(dev, " Bridge bus range [%u --> %u]\n",
+ busrange[0], busrange[1]);

ranges = of_get_property(node, "ranges", &len);
simba = 0;
@@ -454,8 +455,8 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,

bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
if (!bus) {
- printk(KERN_ERR "Failed to create pci bus for %s\n",
- node->full_name);
+ pci_err(dev, "Failed to create pci bus for %s\n",
+ node->full_name);
return;
}

@@ -464,8 +465,8 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
bus->bridge_ctl = 0;

if (ofpci_verbose)
- printk(" Bridge ranges[%p] simba[%d]\n",
- ranges, simba);
+ pci_info(dev, " Bridge ranges[%p] simba[%d]\n",
+ ranges, simba);

/* parse ranges property, or cook one up by hand for Simba */
/* PCI #address-cells == 3 and #size-cells == 2 always */
@@ -487,10 +488,10 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
u64 start;

if (ofpci_verbose)
- printk(" RAW Range[%08x:%08x:%08x:%08x:%08x:%08x:"
- "%08x:%08x]\n",
- ranges[0], ranges[1], ranges[2], ranges[3],
- ranges[4], ranges[5], ranges[6], ranges[7]);
+ pci_info(dev, " RAW Range[%08x:%08x:%08x:%08x:%08x:%08x:"
+ "%08x:%08x]\n",
+ ranges[0], ranges[1], ranges[2], ranges[3],
+ ranges[4], ranges[5], ranges[6], ranges[7]);

flags = pci_parse_of_flags(ranges[0]);
size = GET_64BIT(ranges, 6);
@@ -510,14 +511,14 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
if (flags & IORESOURCE_IO) {
res = bus->resource[0];
if (res->flags) {
- printk(KERN_ERR "PCI: ignoring extra I/O range"
- " for bridge %s\n", node->full_name);
+ pci_err(dev, "ignoring extra I/O range"
+ " for bridge %s\n", node->full_name);
continue;
}
} else {
if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
- printk(KERN_ERR "PCI: too many memory ranges"
- " for bridge %s\n", node->full_name);
+ pci_err(dev, "too many memory ranges"
+ " for bridge %s\n", node->full_name);
continue;
}
res = bus->resource[i];
@@ -529,8 +530,8 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
region.end = region.start + size - 1;

if (ofpci_verbose)
- printk(" Using flags[%08x] start[%016llx] size[%016llx]\n",
- flags, start, size);
+ pci_info(dev, " Using flags[%08x] start[%016llx] size[%016llx]\n",
+ flags, start, size);

pcibios_bus_to_resource(dev->bus, res, &region);
}
@@ -538,7 +539,7 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
bus->number);
if (ofpci_verbose)
- printk(" bus name: %s\n", bus->name);
+ pci_info(dev, " bus name: %s\n", bus->name);

pci_of_scan_bus(pbm, node, bus);
}
@@ -553,14 +554,14 @@ static void pci_of_scan_bus(struct pci_pbm_info *pbm,
struct pci_dev *dev;

if (ofpci_verbose)
- printk("PCI: scan_bus[%s] bus no %d\n",
- node->full_name, bus->number);
+ pci_info(bus, "scan_bus[%s] bus no %d\n",
+ node->full_name, bus->number);

child = NULL;
prev_devfn = -1;
while ((child = of_get_next_child(node, child)) != NULL) {
if (ofpci_verbose)
- printk(" * %s\n", child->full_name);
+ pci_info(bus, " * %s\n", child->full_name);
reg = of_get_property(child, "reg", &reglen);
if (reg == NULL || reglen < 20)
continue;
@@ -581,8 +582,7 @@ static void pci_of_scan_bus(struct pci_pbm_info *pbm,
if (!dev)
continue;
if (ofpci_verbose)
- printk("PCI: dev header type: %x\n",
- dev->hdr_type);
+ pci_info(dev, "dev header type: %x\n", dev->hdr_type);

if (pci_is_bridge(dev))
of_scan_pci_bridge(pbm, child, dev);
@@ -678,12 +678,8 @@ static void pci_claim_bus_resources(struct pci_bus *bus)
continue;

if (ofpci_verbose)
- printk("PCI: Claiming %s: "
- "Resource %d: %016llx..%016llx [%x]\n",
- pci_name(dev), i,
- (unsigned long long)r->start,
- (unsigned long long)r->end,
- (unsigned int)r->flags);
+ pci_info(dev, "Claiming Resource %d: %pR\n",
+ i, r);

pci_claim_resource(dev, i);
}
@@ -755,9 +751,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
}

if (cmd != oldcmd) {
- printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
- pci_name(dev), cmd);
- /* Enable the appropriate bits in the PCI command register. */
+ pci_info(dev, "enabling device (%04x -> %04x)\n", old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
@@ -1117,8 +1111,8 @@ static void pci_bus_slot_names(struct device_node *node, struct pci_bus *bus)
sp = prop->names;

if (ofpci_verbose)
- printk("PCI: Making slots for [%s] mask[0x%02x]\n",
- node->full_name, mask);
+ pci_info(bus, "Making slots for [%s] mask[0x%02x]\n",
+ node->full_name, mask);

i = 0;
while (mask) {
@@ -1131,12 +1125,12 @@ static void pci_bus_slot_names(struct device_node *node, struct pci_bus *bus)
}

if (ofpci_verbose)
- printk("PCI: Making slot [%s]\n", sp);
+ pci_info(bus, "Making slot [%s]\n", sp);

pci_slot = pci_create_slot(bus, i, sp, NULL);
if (IS_ERR(pci_slot))
- printk(KERN_ERR "PCI: pci_create_slot returned %ld\n",
- PTR_ERR(pci_slot));
+ pci_err(bus, "pci_create_slot returned %ld\n",
+ PTR_ERR(pci_slot));

sp += strlen(sp) + 1;
mask &= ~this_bit;
diff --git a/arch/sparc/kernel/pci_common.c b/arch/sparc/kernel/pci_common.c
index 9bb6a192ef3f..ca5fa4cc6dda 100644
--- a/arch/sparc/kernel/pci_common.c
+++ b/arch/sparc/kernel/pci_common.c
@@ -489,8 +489,8 @@ void pci_scan_for_target_abort(struct pci_pbm_info *pbm,
PCI_STATUS_REC_TARGET_ABORT));
if (error_bits) {
pci_write_config_word(pdev, PCI_STATUS, error_bits);
- printk("%s: Device %s saw Target Abort [%016x]\n",
- pbm->name, pci_name(pdev), status);
+ pci_info(pdev, "%s: Device saw Target Abort [%016x]\n",
+ pbm->name, status);
}
}

@@ -512,8 +512,8 @@ void pci_scan_for_master_abort(struct pci_pbm_info *pbm,
(status & (PCI_STATUS_REC_MASTER_ABORT));
if (error_bits) {
pci_write_config_word(pdev, PCI_STATUS, error_bits);
- printk("%s: Device %s received Master Abort [%016x]\n",
- pbm->name, pci_name(pdev), status);
+ pci_info(pdev, "%s: Device received Master Abort "
+ "[%016x]\n", pbm->name, status);
}
}

@@ -536,8 +536,8 @@ void pci_scan_for_parity_error(struct pci_pbm_info *pbm,
PCI_STATUS_DETECTED_PARITY));
if (error_bits) {
pci_write_config_word(pdev, PCI_STATUS, error_bits);
- printk("%s: Device %s saw Parity Error [%016x]\n",
- pbm->name, pci_name(pdev), status);
+ pci_info(dev, "%s: Device saw Parity Error [%016x]\n",
+ pbm->name, status);
}
}

diff --git a/arch/sparc/kernel/pci_msi.c b/arch/sparc/kernel/pci_msi.c
index 1994d7638406..0820ad0dba13 100644
--- a/arch/sparc/kernel/pci_msi.c
+++ b/arch/sparc/kernel/pci_msi.c
@@ -191,8 +191,8 @@ static void sparc64_teardown_msi_irq(unsigned int irq,
break;
}
if (i >= pbm->msi_num) {
- printk(KERN_ERR "%s: teardown: No MSI for irq %u\n",
- pbm->name, irq);
+ pci_err(pdev, "%s: teardown: No MSI for irq %u\n", pbm->name,
+ irq);
return;
}

@@ -201,9 +201,9 @@ static void sparc64_teardown_msi_irq(unsigned int irq,

err = ops->msi_teardown(pbm, msi_num);
if (err) {
- printk(KERN_ERR "%s: teardown: ops->teardown() on MSI %u, "
- "irq %u, gives error %d\n",
- pbm->name, msi_num, irq, err);
+ pci_err(pdev "%s: teardown: ops->teardown() on MSI %u, "
+ "irq %u, gives error %d\n", pbm->name, msi_num, irq,
+ err);
return;
}

diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 5b9244f328aa..fe268f891aed 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -518,10 +518,10 @@ static void pcic_map_pci_device(struct linux_pcic *pcic,
* board in a PCI slot. We must remap it
* under 64K but it is not done yet. XXX
*/
- printk("PCIC: Skipping I/O space at 0x%lx, "
- "this will Oops if a driver attaches "
- "device '%s' at %02x:%02x)\n", address,
- namebuf, dev->bus->number, dev->devfn);
+ pci_info(dev, "PCIC: Skipping I/O space at "
+ "0x%lx, this will Oops if a driver "
+ "attaches device '%s'\n", address,
+ namebuf);
}
}
}
@@ -551,8 +551,8 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node)
p++;
}
if (i >= pcic->pcic_imdim) {
- printk("PCIC: device %s devfn %02x:%02x not found in %d\n",
- namebuf, dev->bus->number, dev->devfn, pcic->pcic_imdim);
+ pci_info(dev, "PCIC: device %s not found in %d\n", namebuf,
+ pcic->pcic_imdim);
dev->irq = 0;
return;
}
@@ -565,7 +565,7 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node)
ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI);
real_irq = ivec >> ((i-4) << 2) & 0xF;
} else { /* Corrupted map */
- printk("PCIC: BAD PIN %d\n", i); for (;;) {}
+ pci_info(dev, "PCIC: BAD PIN %d\n", i); for (;;) {}
}
/* P3 */ /* printk("PCIC: device %s pin %d ivec 0x%x irq %x\n", namebuf, i, ivec, dev->irq); */

@@ -574,10 +574,10 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node)
*/
if (real_irq == 0 || p->force) {
if (p->irq == 0 || p->irq >= 15) { /* Corrupted map */
- printk("PCIC: BAD IRQ %d\n", p->irq); for (;;) {}
+ pci_info(dev, "PCIC: BAD IRQ %d\n", p->irq); for (;;) {}
}
- printk("PCIC: setting irq %d at pin %d for device %02x:%02x\n",
- p->irq, p->pin, dev->bus->number, dev->devfn);
+ pci_info(dev, "PCIC: setting irq %d at pin %d\n", p->irq,
+ p->pin);
real_irq = p->irq;

i = p->pin;
@@ -610,7 +610,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
struct pcidev_cookie *pcp;

if (!pcic0_up) {
- printk("pcibios_fixup_bus: no PCIC\n");
+ pci_info(bus, "pcibios_fixup_bus: no PCIC\n");
return;
}
pcic = &pcic0;
@@ -619,7 +619,8 @@ void pcibios_fixup_bus(struct pci_bus *bus)
* Next crud is an equivalent of pbm = pcic_bus_to_pbm(bus);
*/
if (bus->number != 0) {
- printk("pcibios_fixup_bus: nonzero bus 0x%x\n", bus->number);
+ pci_info(bus, "pcibios_fixup_bus: nonzero bus 0x%x\n",
+ bus->number);
return;
}

@@ -664,9 +665,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
}

if (cmd != oldcmd) {
- printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
- pci_name(dev), cmd);
- /* Enable the appropriate bits in the PCI command register. */
+ pci_info(dev, "enabling device (%04x -> %04x)\n", old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
\
 
 \ /
  Last update: 2018-05-22 02:32    [W:0.148 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site