lkml.org 
[lkml]   [2018]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 15/15] ARM: dts: sun8i: r40: Enable HDMI output on BananaPi M2 Ultra
    Date
    Since HDMI can be considered as main output, most capable mixer is
    connected to it (mixer0).

    Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
    ---
    .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 50 +++++++++++++++++++
    1 file changed, 50 insertions(+)

    diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
    index 27d9ccd0ef2f..66b492ad5847 100644
    --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
    +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
    @@ -58,6 +58,17 @@
    stdout-path = "serial0:115200n8";
    };

    + connector {
    + compatible = "hdmi-connector";
    + type = "a";
    +
    + port {
    + hdmi_con_in: endpoint {
    + remote-endpoint = <&hdmi_out_con>;
    + };
    + };
    + };
    +
    leds {
    compatible = "gpio-leds";

    @@ -93,6 +104,10 @@
    };
    };

    +&de {
    + status = "okay";
    +};
    +
    &ehci1 {
    status = "okay";
    };
    @@ -101,6 +116,22 @@
    status = "okay";
    };

    +&hdmi {
    + status = "okay";
    +};
    +
    +&hdmi_in {
    + hdmi_in_tcon_tv0: endpoint {
    + remote-endpoint = <&tcon_tv0_out_hdmi>;
    + };
    +};
    +
    +&hdmi_out {
    + hdmi_out_con: endpoint {
    + remote-endpoint = <&hdmi_con_in>;
    + };
    +};
    +
    &i2c0 {
    status = "okay";

    @@ -161,6 +192,12 @@
    regulator-name = "vcc-wifi";
    };

    +&mixer0_out {
    + mixer0_out_tcon_tv0: endpoint {
    + remote-endpoint = <&tcon_tv0_in_mixer0>;
    + };
    +};
    +
    &mmc0 {
    vmmc-supply = <&reg_dcdc1>;
    bus-width = <4>;
    @@ -195,6 +232,19 @@
    status = "okay";
    };

    +&tcon_tv0_in {
    + tcon_tv0_in_mixer0: endpoint {
    + remote-endpoint = <&mixer0_out_tcon_tv0>;
    + };
    +};
    +
    +&tcon_tv0_out {
    + tcon_tv0_out_hdmi: endpoint@1 {
    + reg = <1>;
    + remote-endpoint = <&hdmi_in_tcon_tv0>;
    + };
    +};
    +
    &uart0 {
    pinctrl-names = "default";
    pinctrl-0 = <&uart0_pb_pins>;
    --
    2.17.0
    \
     
     \ /
      Last update: 2018-05-19 20:33    [W:3.734 / U:0.128 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site