[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH net-next v3 0/3] net: Allow more drivers with COMPILE_TEST
Hi David,

This patch series includes more drivers to be build tested with COMPILE_TEST
enabled. This helps cover some of the issues I just ran into with missing
a driver *sigh*.

Chanves in v3:

- drop the TI Keystone NETCP driver from the COMPILE_TEST additions

Changes in v2:

- allow FEC to build outside of CONFIG_ARM/ARM64 by defining a layout of
registers, this is not meant to run, so this is not a real issue if we
are not matching the correct register layout

Florian Fainelli (3):
net: ethernet: ti: Allow most drivers with COMPILE_TEST
net: ethernet: freescale: Allow FEC with COMPILE_TEST
net: phy: Allow MDIO_MOXART and MDIO_SUN4I with COMPILE_TEST

drivers/net/ethernet/freescale/Kconfig | 2 +-
drivers/net/ethernet/freescale/fec.h | 2 +-
drivers/net/ethernet/freescale/fec_main.c | 2 +-
drivers/net/ethernet/ti/Kconfig | 12 ++++++------
drivers/net/phy/Kconfig | 4 ++--
5 files changed, 11 insertions(+), 11 deletions(-)


 \ /
  Last update: 2018-05-17 22:08    [W:0.092 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site