lkml.org 
[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] arcnet: com20020: bindings for smsc com20020
Date
From: Andrea Greco <a.greco@4sigma.it>

Add devicetree bindings for smsc com20020

Signed-off-by: Andrea Greco <a.greco@4sigma.it>
---
.../devicetree/bindings/net/smsc-com20020.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/smsc-com20020.txt

diff --git a/Documentation/devicetree/bindings/net/smsc-com20020.txt b/Documentation/devicetree/bindings/net/smsc-com20020.txt
new file mode 100644
index 000000000000..92360b054873
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc-com20020.txt
@@ -0,0 +1,21 @@
+SMSC com20020 Arcnet network controller
+
+Required propelty:
+- timeout-ns: Arcnet bus timeout, Idle Time (328000 - 20500)
+- bus-speed-bps: Arcnet bus speed (10000000 - 156250)
+- smsc,xtal-mhz: External oscillator frequency
+- smsc,backplane-enabled: Controller use backplane mode
+- reset-gpios: Chip reset pin
+- interrupts: Should contain controller interrupt
+
+arcnet@28000000 {
+ compatible = "smsc,com20020";
+
+ timeout-ns = <20500>;
+ bus-speed-bps = <10000000>;
+ smsc,xtal-mhz = <20>;
+ smsc,backplane-enabled;
+
+ reset-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+ interrupts = <&gpio2 10 GPIO_ACTIVE_LOW>;
+};
--
2.14.3
\
 
 \ /
  Last update: 2018-05-17 15:09    [W:0.089 / U:4.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site