[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v7 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property
Document the new optional "fsl,pmic-stby-poweroff" property.

Signed-off-by: Oleksij Rempel <>
Acked-by: Rob Herring <>
Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index c6dd3f5e485b..91fec1a0785d 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -4,6 +4,13 @@ Required properties:
- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
- reg: I2C slave address

+Optional properties:
+- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
+ power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+ Use this option if the SoC should be powered off by external power
+ management IC (PMIC) on PMIC_STBY_REQ signal.
+ As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
Required child node:
- regulators: This is the list of child nodes that specify the regulator
initialization data for defined regulators. Please refer to below doc
 \ /
  Last update: 2018-05-17 07:52    [W:0.109 / U:16.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site