lkml.org 
[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v0 1/2] dt-bindings: clock: Introduce QCOM CPUFREQ FW bindings
+ Rob.

On 17-05-18, 15:00, Taniya Das wrote:
> Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's
> SoCs. This is required for managing the cpu frequency transitions which are
> controlled by firmware.
>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
> .../bindings/cpufreq/cpufreq-qcom-fw.txt | 68 ++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
>
> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
> new file mode 100644
> index 0000000..bc912f4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
> @@ -0,0 +1,68 @@
> +Qualcomm Technologies, Inc. CPUFREQ Bindings
> +
> +CPUFREQ FW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
> +SoCs to manage frequency in hardware. It is capable of controlling frequency
> +for multiple clusters.
> +
> +Properties:
> +- compatible
> + Usage: required
> + Value type: <string>
> + Definition: must be "qcom,cpufreq-fw".
> +
> +Note that #address-cells, #size-cells, and ranges shall be present to ensure
> +the cpufreq can address a freq-domain registers.
> +
> +A freq-domain sub-node would be defined for the cpus with the following
> +properties:
> +
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: must be "cpufreq".
> +
> +- reg
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: Addresses and sizes for the memory of the perf_base
> + , lut_base and en_base.
> +- reg-names
> + Usage: required
> + Value type: <stringlist>
> + Definition: Address names. Must be "perf_base", "lut_base",
> + "en_base".
> + Must be specified in the same order as the
> + corresponding addresses are specified in the reg
> + property.
> +
> +- qcom,cpulist
> + Usage: required
> + Value type: <phandles of CPU>
> + Definition: List of related cpu handles which are under a cluster.
> +
> +Example:
> + qcom,cpufreq-fw {
> + compatible = "qcom,cpufreq-fw";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + freq-domain-0 {
> + compatible = "cpufreq";
> + reg = <0x17d43920 0x4>,
> + <0x17d43110 0x500>,
> + <0x17d41000 0x4>;
> + reg-names = "perf_base", "lut_base", "en_base";
> + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3>;
> + };
> +
> + freq-domain-1 {
> + compatible = "cpufreq";
> + reg = <0x17d46120 0x4>,
> + <0x17d45910 0x500>,
> + <0x17d45800 0x4>;
> + reg-names = "perf_base", "lut_base", "en_base";
> + qcom,cpulist = <&CPU4 &CPU5 &CPU6 &CPU7>;
> + };
> + };
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.

--
viresh

\
 
 \ /
  Last update: 2018-05-17 12:14    [W:0.115 / U:1.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site