lkml.org 
[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [BUG] i2c-hid: ELAN Touchpad does not work on ASUS X580GD
From
Date
Hi

On 05/15/2018 01:20 PM, Jarkko Nikula wrote:
> On 05/15/2018 06:22 AM, Chris Chiu wrote:
>> What if I change the 120MHz to 180MHz and then make sure that the I2C
>> operates
>> in target FS mode frequency 400kHz via scope? Would there be any side
>> effect?
>> Maybe some other busses frequency could be also affected and causing
>> some other
>> component malfunction?
>>
> Should be safe. It is only clock rate information when registering a
> fixed clock with known rate in intel-lpss.c and i2c-designware uses that
> info when calculating the timing parameters. I.e. it doesn't change any
> internal clocks.
>
> I'm trying to find a contact who can confirm what is the expected rate
> of I2C input clock and is it common to all Cannon Lake HW.
>
I got confirmation that input clock is actually even higher 216 Mhz.

While checking does it cover all of those CNL CNL-LP and CNL-H PCI IDs
may I add your Jian-Hong, Chris and Daniel email addresses to Repored-by
tags in a fix patch?

--
Jarkko

\
 
 \ /
  Last update: 2018-05-17 09:49    [W:0.128 / U:11.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site