lkml.org 
[lkml]   [2018]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/5] arm64: dts: rockchip: Add gpio-mute to rk3328
Date
From: Levin Du <djw@t-chip.com.cn>

Adding a new gpio controller named "gpio-mute" to rk3328, providing
access to the GPIO_MUTE pin defined in the syscon GRF_SOC_CON10.

The GPIO_MUTE pin is referred to as <&gpio-mute 1>.

Signed-off-by: Levin Du <djw@t-chip.com.cn>

---

Changes in v2:
- Rename gpio_syscon10 to gpio_mute in rk3328.dtsi

Changes in v1:
- Split from V0 and add to rk3328.dtsi for general use.

arch/arm64/boot/dts/rockchip/rk3328.dtsi | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index b8e9da1..5ba29d3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -309,6 +309,13 @@
mode-loader = <BOOT_BL_DOWNLOAD>;
};

+ /* The GPIO_MUTE pin is referred to as <&gpio-mute 1>.*/
+ gpio_mute: gpio-mute {
+ compatible = "rockchip,gpio-syscon";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio,syscon-dev = <0 0x0428 0>;
+ };
};

uart0: serial@ff110000 {
--
2.7.4

\
 
 \ /
  Last update: 2018-05-18 05:53    [W:0.111 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site