lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 2/2] leds: lm3601x: Introduce the lm3601x LED driver
From
Date
Dan,

Thanks for the update. Please refer to my comments below.

On 05/15/2018 05:43 PM, Dan Murphy wrote:
> Introduce the family of LED devices that can
> drive a torch, strobe or IR LED.
>
> The LED driver can be configured with a strobe
> timer to execute a strobe flash. The IR LED
> brightness is controlled via the torch brightness
> register.
>
> The data sheet for each the LM36010 and LM36011
> LED drivers can be found here:
> http://www.ti.com/product/LM36010
> http://www.ti.com/product/LM36011
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>
> v6 - This driver has been heavily modified from v5. There is no longer reading
> of individual child nodes. There are too many changes to list here see -
> https://patchwork.kernel.org/patch/10392123/
>
> v5 - Fixed magic numbers, change reg cache type, added of_put_node to release
> the dt node ref, and I did not change the remove function to leave the LED in its
> state on driver removal - https://patchwork.kernel.org/patch/10391741/
> v4 - Fixed Cocci issue using ARRAY_SIZE - https://patchwork.kernel.org/patch/10389259/
> v3 - removed wildcard dt compatible, fixed copyright, fixed struct doc, removed
> RO registers from default, added regmap volatile for FLAGS_REG, updated regmap cache type,
> fixed unlock and extra semi colon in strobe_set, removed unnecessary out label
> in led register and fixed checking of the ret in brightness_set - https://patchwork.kernel.org/patch/10386243/
> v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/
>
> drivers/leds/Kconfig | 9 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-lm3601x.c | 595 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 605 insertions(+)
> create mode 100644 drivers/leds/leds-lm3601x.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 2c896c0e69e1..50ae536f343f 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -145,6 +145,15 @@ config LEDS_LM3692X
> This option enables support for the TI LM3692x family
> of white LED string drivers used for backlighting.
>
> +config LEDS_LM3601X
> + tristate "LED support for LM3601x Chips"
> + depends on LEDS_CLASS && I2C && OF
> + depends on LEDS_CLASS_FLASH
> + select REGMAP_I2C
> + help
> + This option enables support for the TI LM3601x family
> + of flash, torch and indicator classes.
> +
> config LEDS_LOCOMO
> tristate "LED Support for Locomo device"
> depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 91eca81cae82..b79807fe1b67 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o
> obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
> obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
> obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
> +obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o
>
> # LED SPI Drivers
> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
> diff --git a/drivers/leds/leds-lm3601x.c b/drivers/leds/leds-lm3601x.c
> new file mode 100644
> index 000000000000..fa87da5d5159
> --- /dev/null
> +++ b/drivers/leds/leds-lm3601x.c
> @@ -0,0 +1,595 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Flash and torch driver for Texas Instruments LM3601X LED
> +// Flash driver chip family
> +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/leds.h>
> +#include <linux/led-class-flash.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <uapi/linux/uleds.h>
> +
> +#define LM3601X_LED_TORCH 0x0
> +#define LM3601X_LED_IR 0x1
> +
> +/* Registers */
> +#define LM3601X_ENABLE_REG 0x01
> +#define LM3601X_CFG_REG 0x02
> +#define LM3601X_LED_FLASH_REG 0x03
> +#define LM3601X_LED_TORCH_REG 0x04
> +#define LM3601X_FLAGS_REG 0x05
> +#define LM3601X_DEV_ID_REG 0x06
> +
> +#define LM3601X_SW_RESET BIT(7)
> +
> +/* Enable Mode bits */
> +#define LM3601X_MODE_STANDBY 0x00
> +#define LM3601X_MODE_IR_DRV BIT(0)
> +#define LM3601X_MODE_TORCH BIT(1)
> +#define LM3601X_MODE_STROBE (BIT(0) | BIT(1))
> +#define LM3601X_STRB_EN BIT(2)
> +#define LM3601X_STRB_LVL_TRIG ~BIT(3)
> +#define LM3601X_STRB_EDGE_TRIG BIT(3)
> +#define LM3601X_IVFM_EN BIT(4)
> +
> +#define LM36010_BOOST_LIMIT_19 ~BIT(5)
> +#define LM36010_BOOST_LIMIT_28 BIT(5)
> +#define LM36010_BOOST_FREQ_2MHZ ~BIT(6)
> +#define LM36010_BOOST_FREQ_4MHZ BIT(6)
> +#define LM36010_BOOST_MODE_NORM ~BIT(7)
> +#define LM36010_BOOST_MODE_PASS BIT(7)
> +
> +/* Flag Mask */
> +#define LM3601X_FLASH_TIME_OUT BIT(0)
> +#define LM3601X_UVLO_FAULT BIT(1)
> +#define LM3601X_THERM_SHUTDOWN BIT(2)
> +#define LM3601X_THERM_CURR BIT(3)
> +#define LM36010_CURR_LIMIT BIT(4)
> +#define LM3601X_SHORT_FAULT BIT(5)
> +#define LM3601X_IVFM_TRIP BIT(6)
> +#define LM36010_OVP_FAULT BIT(7)
> +
> +#define LM3601X_MIN_TORCH_I_UA 2400
> +#define LM3601X_MIN_STROBE_I_MA 11
> +
> +#define LM3601X_TIMEOUT_MASK 0x1e
> +#define LM3601X_ENABLE_MASK 0x03
> +
> +enum lm3601x_type {
> + CHIP_LM36010 = 0,
> + CHIP_LM36011,
> +};
> +
> +/**
> + * struct lm3601x_max_timeouts -
> + * @timeout: timeout value in ms
> + * @regval: the value of the register to write
> + */
> +struct lm3601x_max_timeouts {
> + int timeout;
> + int reg_val;
> +};
> +
> +/**
> + * struct lm3601x_led -
> + * @lock: Lock for reading/writing the device
> + * @regmap: Devices register map
> + * @client: Pointer to the I2C client
> + * @led_node: DT device node for the led
> + * @cdev_torch: led class device pointer for the torch
> + * @cdev_ir: led class device pointer for infrared
> + * @fled_cdev: flash led class device pointer
> + * @led_name: LED label for the Torch or IR LED
> + * @strobe: LED label for the strobe
> + * @last_flag: last known flags register value
> + * @strobe_timeout: the timeout for the strobe
> + * @torch_current_max: maximum current for the torch
> + * @strobe_current_max: maximum current for the strobe
> + * @max_strobe_timeout: maximum timeout for the strobe
> + * @led_mode: The mode to enable either IR or Torch
> + */
> +struct lm3601x_led {
> + struct mutex lock;
> + struct regmap *regmap;
> + struct i2c_client *client;
> +
> + struct device_node *led_node;
> +
> + struct led_classdev cdev_torch;
> + struct led_classdev cdev_ir;
> +
> + struct led_classdev_flash fled_cdev;
> +
> + char led_name[LED_MAX_NAME_SIZE];
> + char strobe[LED_MAX_NAME_SIZE];
> +
> + unsigned int last_flag;
> + unsigned int strobe_timeout;
> +
> + u32 torch_current_max;
> + u32 strobe_current_max;
> + u32 max_strobe_timeout;
> +
> + int led_mode;
> +};
> +
> +static const struct lm3601x_max_timeouts strobe_timeouts[] = {
> + { 40000, 0x00 },
> + { 80000, 0x01 },
> + { 120000, 0x02 },
> + { 160000, 0x03 },
> + { 200000, 0x04 },
> + { 240000, 0x05 },
> + { 280000, 0x06 },
> + { 320000, 0x07 },
> + { 360000, 0x08 },
> + { 400000, 0x09 },
> + { 600000, 0x0a },
> + { 800000, 0x0b },
> + { 1000000, 0x0c },
> + { 1200000, 0x0d },
> + { 1400000, 0x0e },
> + { 1600000, 0x0f },
> +};
> +
> +static const struct reg_default lm3601x_regmap_defs[] = {
> + { LM3601X_ENABLE_REG, 0x20 },
> + { LM3601X_CFG_REG, 0x15 },
> + { LM3601X_LED_FLASH_REG, 0x00 },
> + { LM3601X_LED_TORCH_REG, 0x00 },
> +};
> +
> +static bool lm3601x_volatile_reg(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case LM3601X_FLAGS_REG:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct regmap_config lm3601x_regmap = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .max_register = LM3601X_DEV_ID_REG,
> + .reg_defaults = lm3601x_regmap_defs,
> + .num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs),
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = lm3601x_volatile_reg,
> +};
> +
> +static struct lm3601x_led *fled_cdev_to_led(
> + struct led_classdev_flash *fled_cdev)
> +{
> + return container_of(fled_cdev, struct lm3601x_led, fled_cdev);
> +}
> +
> +static int lm3601x_read_faults(struct lm3601x_led *led)
> +{
> + int flags_val;
> + int ret;
> +
> + ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val);
> + if (ret < 0)
> + return -EIO;
> +
> + led->last_flag = 0;
> +
> + if (flags_val & LM36010_OVP_FAULT)
> + led->last_flag |= LED_FAULT_OVER_VOLTAGE;
> +
> + if (flags_val & (LM3601X_THERM_SHUTDOWN | LM3601X_THERM_CURR))
> + led->last_flag |= LED_FAULT_OVER_TEMPERATURE;
> +
> + if (flags_val & LM3601X_SHORT_FAULT)
> + led->last_flag |= LED_FAULT_SHORT_CIRCUIT;
> +
> + if (flags_val & LM36010_CURR_LIMIT)
> + led->last_flag |= LED_FAULT_OVER_CURRENT;
> +
> + if (flags_val & LM3601X_UVLO_FAULT)
> + led->last_flag |= LED_FAULT_UNDER_VOLTAGE;
> +
> + if (flags_val & LM3601X_IVFM_TRIP)
> + led->last_flag |= LED_FAULT_INPUT_VOLTAGE;
> +
> + if (flags_val & LM3601X_THERM_SHUTDOWN)
> + led->last_flag |= LED_FAULT_LED_OVER_TEMPERATURE;
> +
> + return led->last_flag;
> +}
> +
> +static int lm3601x_brightness_set(struct led_classdev *cdev,
> + enum led_brightness brightness)
> +{
> + struct lm3601x_led *led =
> + container_of(cdev, struct lm3601x_led, cdev_torch);
> + u8 brightness_val;
> + int ret, led_mode_val;
> +
> + mutex_lock(&led->lock);
> +
> + ret = lm3601x_read_faults(led);
> + if (ret < 0)
> + goto out;
> +
> + if (led->led_mode == LM3601X_LED_TORCH)
> + led_mode_val = LM3601X_MODE_TORCH;
> + else
> + led_mode_val = LM3601X_MODE_IR_DRV;
> +
> + if (brightness == LED_OFF) {
> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> + led_mode_val, LED_OFF);
> + goto out;
> + }
> +
> + if (brightness == LED_ON)
> + brightness_val = LED_ON;
> + else
> + brightness_val = (brightness/2);
> +
> + ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness_val);
> + if (ret < 0)
> + goto out;
> +
> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> + led_mode_val,
> + led_mode_val);
> +
> +out:
> + mutex_unlock(&led->lock);
> + return ret;
> +}
> +
> +static int lm3601x_strobe_set(struct led_classdev_flash *fled_cdev,
> + bool state)
> +{
> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
> + int ret;
> + int current_timeout;
> + int reg_count;
> + int i;
> + int timeout_reg_val = 0;
> +
> + mutex_lock(&led->lock);
> +
> + ret = regmap_read(led->regmap, LM3601X_CFG_REG, &current_timeout);
> + if (ret < 0)
> + goto out;
> +
> + reg_count = ARRAY_SIZE(strobe_timeouts);
> + for (i = 0; i < reg_count; i++) {
> + if (led->strobe_timeout > strobe_timeouts[i].timeout)
> + continue;
> +
> + if (led->strobe_timeout <= strobe_timeouts[i].timeout) {
> + timeout_reg_val = (strobe_timeouts[i].reg_val << 1);
> + break;
> + }
> +
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + if (led->strobe_timeout != current_timeout)
> + ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG,
> + LM3601X_TIMEOUT_MASK, timeout_reg_val);
> +
> + if (state)
> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> + LM3601X_MODE_STROBE,
> + LM3601X_MODE_STROBE);
> + else
> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> + LM3601X_MODE_STROBE, LED_OFF);
> +
> + ret = lm3601x_read_faults(led);
> +out:
> + mutex_unlock(&led->lock);
> + return ret;
> +}
> +
> +static int lm3601x_strobe_brightness_set(struct led_classdev *cdev,
> + enum led_brightness brightness)
> +{
> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
> + int ret;
> + u8 brightness_val;
> +
> + mutex_lock(&led->lock);
> + ret = lm3601x_read_faults(led);
> + if (ret < 0)
> + goto out;
> +
> + if (brightness == LED_OFF) {
> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> + LM3601X_MODE_STROBE, LED_OFF);
> + goto out;
> + }
> +
> + if (brightness == LED_ON)
> + brightness_val = LED_ON;
> + else
> + brightness_val = (brightness/2);
> +
> + ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
> +
> +out:
> + mutex_unlock(&led->lock);
> + return ret;
> +}
> +
> +static int lm3601x_strobe_timeout_set(struct led_classdev_flash *fled_cdev,
> + u32 timeout)
> +{
> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
> + int ret = 0;
> +
> + mutex_lock(&led->lock);
> +
> + led->strobe_timeout = timeout;
> +
> + mutex_unlock(&led->lock);
> +
> + return ret;
> +}
> +
> +static int lm3601x_strobe_get(struct led_classdev_flash *fled_cdev,
> + bool *state)
> +{
> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
> + int ret;
> + int strobe_state;
> +
> + mutex_lock(&led->lock);
> +
> + ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &strobe_state);
> + if (ret < 0)
> + goto out;
> +
> + *state = strobe_state & LM3601X_MODE_STROBE;
> +
> +out:
> + mutex_unlock(&led->lock);
> + return ret;
> +}
> +
> +static int lm3601x_strobe_fault_get(struct led_classdev_flash *fled_cdev,
> + u32 *fault)
> +{
> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
> +
> + lm3601x_read_faults(led);
> +
> + *fault = led->last_flag;
> +
> + return 0;
> +}
> +
> +static const struct led_flash_ops strobe_ops = {
> + .strobe_set = lm3601x_strobe_set,
> + .strobe_get = lm3601x_strobe_get,
> + .timeout_set = lm3601x_strobe_timeout_set,
> + .fault_get = lm3601x_strobe_fault_get,

You're still missing flash_brightness_set here.

> +};
> +
> +static int lm3601x_register_leds(struct lm3601x_led *led)
> +{
> + struct led_classdev_flash *fled_cdev;
> + struct led_classdev *led_cdev;
> + int err = -ENODEV;
> +
> + led->cdev_torch.name = led->led_name;
> + led->cdev_torch.max_brightness = LED_FULL;

This should be led->torch_current_max converted to brightness levels.
Please compare how leds-max77693 and leds-as3645a do that.

> + led->cdev_torch.brightness_set_blocking = lm3601x_brightness_set;
> + err = devm_led_classdev_register(&led->client->dev,
> + &led->cdev_torch);
> + if (err < 0)
> + return err;

You shouldn't register two LED class devices for a single DT child
node, and honestly I don't know why you would have to do it.

> +
> + fled_cdev = &led->fled_cdev;
> + fled_cdev->ops = &strobe_ops;
> +
> + led_cdev = &fled_cdev->led_cdev;
> + led_cdev->name = led->strobe;
> + led_cdev->max_brightness = LED_FUL
> + led_cdev->brightness_set_blocking = lm3601x_strobe_brightness_set;
> + led_cdev->flags |= LED_DEV_CAP_FLASH;
> +
> + err = led_classdev_flash_register(&led->client->dev,
> + fled_cdev);

Please look into the implementation of led_classdev_flash_register()
and compare other LED flash class drivers. What prevents you from
applying the same approach?

To put it concisely: LED flash class wrapper was designed to allow
for operating on a single LED in two modes: torch and flash.
Torch brightness is governed by brightness file and flash brightness
is governed by flash_brightness file. The difference between the two
modes is that torch mode is activated by writing value greater than 0
to the brightness file and flash mode is activated by writing 1 to
the strobe_set file.

In other words flash_brightness overwrites the (torch) brightness
for the time equal to the flash_timeout or until 0 is written
to the strobe_set file.

> + return err;
> +}
> +
> +static void lm3601x_init_flash_timeout(struct lm3601x_led *led)
> +{
> + struct led_flash_setting *setting;
> +
> + setting = &led->fled_cdev.timeout;
> + setting->min = strobe_timeouts[0].timeout;
> + setting->max = led->max_strobe_timeout;
> + setting->step = 40;
> + setting->val = led->max_strobe_timeout;
> +}
> +
> +static int lm3601x_parse_node(struct lm3601x_led *led,
> + struct device_node *node)
> +{
> + struct device_node *child_node;
> + const char *name;
> + char *mode_name;
> + int ret = -ENODEV;
> +
> + for_each_available_child_of_node(node, child_node) {
> + led->led_node = of_node_get(child_node);
> + if (!led->led_node) {
> + dev_err(&led->client->dev,
> + "No LED Child node\n");
> +
> + goto out_err;
> + }
> +
> + ret = of_property_read_u32(led->led_node, "led-sources",
> + &led->led_mode);
> + if (ret) {
> + dev_err(&led->client->dev,
> + "led-sources DT property missing\n");
> + goto out_err;
> + }
> +
> + if (led->led_mode < LM3601X_LED_TORCH ||
> + led->led_mode > LM3601X_LED_IR) {
> + dev_warn(&led->client->dev,
> + "Invalid led mode requested\n");
> +
> + goto out_err;
> +
> + }
> + }
> +
> + if (led->led_mode == LM3601X_LED_TORCH) {
> + ret = of_property_read_string(led->led_node, "label", &name);
> + if (!ret)
> + snprintf(led->led_name, sizeof(led->led_name),
> + "%s:%s", led->led_node->name, name);

First segment of a LED class device name should be "devicename".

> + else
> + snprintf(led->led_name, sizeof(led->led_name),
> + "%s:torch", led->led_node->name);
> +
> + ret = of_property_read_u32(led->led_node, "led-max-microamp",
> + &led->torch_current_max);
> + if (ret < 0) {
> + dev_warn(&led->client->dev,
> + "led-max-microamp DT property missing\n");
> +
> + goto out_err;
> + }
> +
> + mode_name = "torch";
> +
> + } else if (led->led_mode == LM3601X_LED_IR) {
> + ret = of_property_read_string(led->led_node, "label", &name);
> + if (!ret)
> + snprintf(led->led_name, sizeof(led->led_name),
> + "%s:%s", led->led_node->name, name);
> + else
> + snprintf(led->led_name, sizeof(led->led_name),
> + "%s::infrared", led->led_node->name);

Ditto.

> +
> + mode_name = "ir";
> +
> + } else {
> + dev_warn(&led->client->dev,
> + "No LED mode is selected exiting probe\n");
> +
> + goto out_err;
> + }
> +
> + /* Flash mode is available in IR or Torch mode so read the DT */
> + snprintf(led->strobe, sizeof(led->strobe),
> + "%s:%s:strobe", led->led_node->name, mode_name);

strobe is not a proper LED function name (it is not a noun).
Please use "flash" instead.

> +
> + ret = of_property_read_u32(led->led_node,
> + "flash-max-microamp",
> + &led->strobe_current_max);
> + if (ret < 0) {
> + dev_warn(&led->client->dev,
> + "flash-max-microamp DT property missing\n");
> + goto out_err;
> + }
> +
> + ret = of_property_read_u32(led->led_node,
> + "flash-max-timeout-us",
> + &led->max_strobe_timeout);
> + if (ret < 0) {
> + dev_warn(&led->client->dev,
> + "flash-max-timeout-us DT property missing\n");
> +
> + goto out_err;
> + }
> +
> + lm3601x_init_flash_timeout(led);
> +
> +out_err:
> + of_node_put(led->led_node);
> + return ret;
> +}
> +
> +static int lm3601x_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct lm3601x_led *led;
> + int err;
> +
> + led = devm_kzalloc(&client->dev,
> + sizeof(struct lm3601x_led), GFP_KERNEL);
> + if (!led)
> + return -ENOMEM;
> +
> + err = lm3601x_parse_node(led, client->dev.of_node);
> + if (err < 0)
> + return -ENODEV;
> +
> + led->client = client;
> + led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap);
> + if (IS_ERR(led->regmap)) {
> + err = PTR_ERR(led->regmap);
> + dev_err(&client->dev,
> + "Failed to allocate register map: %d\n", err);
> + return err;
> + }
> +
> + mutex_init(&led->lock);
> + i2c_set_clientdata(client, led);
> + err = lm3601x_register_leds(led);
> +
> + return err;
> +}
> +
> +static int lm3601x_remove(struct i2c_client *client)
> +{
> + struct lm3601x_led *led = i2c_get_clientdata(client);
> +
> + regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> + LM3601X_ENABLE_MASK,
> + LM3601X_MODE_STANDBY);

You need also mutex_destroy(&led->lock) here.

> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id lm3601x_id[] = {
> + { "LM36010", CHIP_LM36010 },
> + { "LM36011", CHIP_LM36011 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(i2c, lm3601x_id);
> +
> +static const struct of_device_id of_lm3601x_leds_match[] = {
> + { .compatible = "ti,lm36010", },
> + { .compatible = "ti,lm36011", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match);
> +
> +static struct i2c_driver lm3601x_i2c_driver = {
> + .driver = {
> + .name = "lm3601x",
> + .of_match_table = of_lm3601x_leds_match,
> + },
> + .probe = lm3601x_probe,
> + .remove = lm3601x_remove,
> + .id_table = lm3601x_id,
> +};
> +module_i2c_driver(lm3601x_i2c_driver);
> +
> +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X");
> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
> +MODULE_LICENSE("GPL v2");
>

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2018-05-15 23:26    [W:0.195 / U:3.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site