lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv2] arm64: dts: stratix10: Add QSPI support for Stratix10
From
Date
On 05/15/2018 10:11 AM, Dinh Nguyen wrote:
>
> On 05/11/2018 11:10 AM, thor.thayer@linux.intel.com wrote:
>> From: Thor Thayer <thor.thayer@linux.intel.com>
>>
>> Add qspi_clock
>> The qspi_clk frequency is updated by U-Boot before starting Linux.
>> Add QSPI interface node.
>> Add QSPI flash memory child node.
>> Setup the QSPI memory in 2 partitions.
>>
>> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
>> ---
>> v2 s/_/-/ in qspi-clk
>> rename flash node.
>> use partition child node notation<snip>>> + qspi: spi@ff8d2000 {
>> + compatible = "cdns,qspi-nor";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0xff8d2000 0x100>,
>> + <0xff900000 0x100000>;
>> + interrupts = <0 3 4>;
>> + cdns,fifo-depth = <128>;
>> + cdns,fifo-width = <4>;
>> + cdns,trigger-address = <0x00000000>;
>> + clocks = <&qspi_clk>;
>> + bus-num = <1>;
>
> I don't you need "bus-num" anymore right? I don't see it getting used
> anywhere in the driver.
>
> Dinh
>

Yes, I missed that holdover. Thanks, I'll correct that.

\
 
 \ /
  Last update: 2018-05-15 22:08    [W:0.076 / U:2.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site