lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject`ucsi_acpi: probe of USBC000:00 failed with error -12` on Dell XPS 13 9370
Date
Dear Linux folks,


Linux 4.17-rc5 shows the error below on the Dell XPS 13 9370 with Debian
Sid/unstable.

```
[…]
[ 0.440240] usb: port power management may be unreliable
[ 0.441358] usbcore: registered new interface driver usb-storage
[ 0.441367] usbcore: registered new interface driver usbserial_generic
[ 0.441369] usbserial: USB Serial support registered for generic
[ 0.441383] ioremap error for 0x3f799000-0x3f79a000, requested 0x2,
got 0x0
[ 0.441518] ucsi_acpi: probe of USBC000:00 failed with error -12
[…]
```

1. Are the ioremap and ucsi_acpi error related or is a separate report
needed?
2. Do you know the reason for the ucsi_acpi error?


Kind regards,

Paul
[ 0.000000] Linux version 4.17.0-rc5-00009-g1150fc87af6f (root@eed5a4f78c51) (gcc version 7.3.0 (Debian 7.3.0-19)) #2 SMP Tue May 15 12:47:39 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.17.0-rc5-00009-g1150fc87af6f root=UUID=b8b2f3b6-8c20-4c2a-8895-aa2768866674 ro quiet noisapnp cryptomgr.notests mem_sleep_default=deep
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002d6f7fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000002d6f8000-0x000000002d6f8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000002d6f9000-0x000000002d6f9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000002d6fa000-0x000000003ecf4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ecf5000-0x000000003f0b2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003f0b3000-0x000000003f0fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f100000-0x000000003f7b7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f7b8000-0x000000003ff26fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003ff27000-0x000000003fffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000048000000-0x0000000048dfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004ae7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x3f0c3000 ACPI 2.0=0x3f0c3000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 ESRT=0x3fdd9018 MEMATTR=0x3c2bb018
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.2.1 02/21/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x4ae800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 0060000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 0050000000 mask 7FF0000000 uncachable
[ 0.000000] 3 base 004C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 004B000000 mask 7FFF000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x48e00 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x000000003fdd9018 to 0x000000003fdd9050.
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x147a03000, 0x147a03fff] PGTABLE
[ 0.000000] BRK [0x147a04000, 0x147a04fff] PGTABLE
[ 0.000000] BRK [0x147a05000, 0x147a05fff] PGTABLE
[ 0.000000] BRK [0x147a06000, 0x147a06fff] PGTABLE
[ 0.000000] BRK [0x147a07000, 0x147a07fff] PGTABLE
[ 0.000000] BRK [0x147a08000, 0x147a08fff] PGTABLE
[ 0.000000] BRK [0x147a09000, 0x147a09fff] PGTABLE
[ 0.000000] BRK [0x147a0a000, 0x147a0afff] PGTABLE
[ 0.000000] BRK [0x147a0b000, 0x147a0bfff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x37349000-0x3799bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000003F0C3000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000003F0C30B8 0000F4 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000003F0E9860 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000003F0C3240 02661B (v02 DELL CBX3 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000003F7B5180 000040
[ 0.000000] ACPI: APIC 0x000000003F0E9970 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000003F0E9A30 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000003F0E9A78 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000003F0E9B28 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000003F0E9B68 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000003F0E9BA0 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: BOOT 0x000000003F0E9F00 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000003F0E9F28 0012DE (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000003F0EB208 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000003F0EB240 000CEF (v02 INTEL xh_rvp07 00000000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x000000003F0EBF30 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x000000003F0EBF78 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000003F0ED728 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000003F0ED7C0 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000003F0ED928 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000003F0EDBC8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000003F0F0BD0 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000003F0F10E8 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000003F0F1120 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000003F0F1178 000801 (v02 INTEL UsbCTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000003F0F1980 00CFC3 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: NHLT 0x000000003F0FE948 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: ASF! 0x000000003F0FE978 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 0x000000003F0FEA18 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x000000003F0FEB08 000038 (v00 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004ae7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x4ae7e9000-0x4ae7fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000004ae7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000002d6f7fff]
[ 0.000000] node 0: [mem 0x000000002d6fa000-0x000000003ecf4fff]
[ 0.000000] node 0: [mem 0x000000003ffff000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000048000000-0x0000000048dfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000004ae7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000004ae7fffff]
[ 0.000000] On node 0 totalpages: 4121232
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4012 pages used for memmap
[ 0.000000] DMA32 zone: 256756 pages, LIFO batch:31
[ 0.000000] Normal zone: 60320 pages used for memmap
[ 0.000000] Normal zone: 3860480 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x2d6f8000-0x2d6f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x2d6f9000-0x2d6f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3ecf5000-0x3f0b2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3f0b3000-0x3f0fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3f100000-0x3f7b7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3f7b8000-0x3ff26fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3ff27000-0x3fffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x47ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x48e00000-0x4f7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4f800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x4f800000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x50e with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 44 pages/cpu @ (ptrval) s141336 r8192 d30696 u262144
[ 0.000000] pcpu-alloc: s141336 r8192 d30696 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4056814
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.17.0-rc5-00009-g1150fc87af6f root=UUID=b8b2f3b6-8c20-4c2a-8895-aa2768866674 ro quiet noisapnp cryptomgr.notests mem_sleep_default=deep
[ 0.000000] Memory: 16079200K/16484928K available (12300K kernel code, 1477K rwdata, 3900K rodata, 1660K init, 1272K bss, 405728K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 36978 entries in 145 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180313
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.001000] APIC: Switch to symmetric I/O mode setup
[ 0.001000] DMAR: Host address width 39
[ 0.001000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.001000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.001000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.001000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.001000] DMAR: RMRR base: 0x0000003edce000 end: 0x0000003ededfff
[ 0.001000] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[ 0.001000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.001000] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.001000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.001000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.001000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.002000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.002000] x2apic enabled
[ 0.002000] Switched APIC routing to cluster x2apic.
[ 0.006000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.011000] tsc: Detected 2000.000 MHz processor
[ 0.011000] tsc: Detected 1992.000 MHz TSC
[ 0.011000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[ 0.011000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3984.00 BogoMIPS (lpj=1992000)
[ 0.011000] pid_max: default: 32768 minimum: 301
[ 0.011000] Security Framework initialized
[ 0.011000] Yama: becoming mindful.
[ 0.011000] SELinux: Initializing.
[ 0.011000] SELinux: Starting in permissive mode
[ 0.013384] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.014163] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.014200] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.014224] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.014353] CPU: Physical Processor ID: 0
[ 0.014354] CPU: Processor Core ID: 0
[ 0.014357] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.014357] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.014360] mce: CPU supports 10 MCE banks
[ 0.014367] CPU0: Thermal monitoring enabled (TM1)
[ 0.014380] process: using mwait in idle threads
[ 0.014381] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.014382] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.014383] Spectre V2 : Mitigation: Full generic retpoline
[ 0.014383] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.014383] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.014384] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.018424] Freeing SMP alternatives memory: 36K
[ 0.019881] TSC deadline timer enabled
[ 0.019886] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[ 0.019937] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.019957] ... version: 4
[ 0.019957] ... bit width: 48
[ 0.019958] ... generic registers: 4
[ 0.019958] ... value mask: 0000ffffffffffff
[ 0.019958] ... max period: 00007fffffffffff
[ 0.019959] ... fixed-purpose events: 3
[ 0.019959] ... event mask: 000000070000000f
[ 0.019983] Hierarchical SRCU implementation.
[ 0.020000] smp: Bringing up secondary CPUs ...
[ 0.020000] x86: Booting SMP configuration:
[ 0.020000] .... node #0, CPUs: #1
[ 0.020220] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.020228] #2 #3 #4 #5 #6 #7
[ 0.022423] smp: Brought up 1 node, 8 CPUs
[ 0.022423] smpboot: Max logical packages: 1
[ 0.022423] smpboot: Total of 8 processors activated (31872.00 BogoMIPS)
[ 0.023380] devtmpfs: initialized
[ 0.023380] x86/mm: Memory block size: 128MB
[ 0.024180] PM: Registering ACPI NVS region [mem 0x2d6f8000-0x2d6f8fff] (4096 bytes)
[ 0.024180] PM: Registering ACPI NVS region [mem 0x3f100000-0x3f7b7fff] (7045120 bytes)
[ 0.024180] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.024180] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.024180] xor: automatically using best checksumming function avx
[ 0.024180] pinctrl core: initialized pinctrl subsystem
[ 0.024180] RTC time: 13:27:31, date: 05/15/18
[ 0.024223] NET: Registered protocol family 16
[ 0.024286] audit: initializing netlink subsys (disabled)
[ 0.024288] audit: type=2000 audit(1526390851.024:1): state=initialized audit_enabled=0 res=1
[ 0.024288] cpuidle: using governor menu
[ 0.024288] Simple Boot Flag at 0x47 set to 0x80
[ 0.024288] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.024288] ACPI: bus type PCI registered
[ 0.024288] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.024288] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.024288] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.024288] PCI: Using configuration type 1 for base access
[ 0.025023] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.025023] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.025023] cryptd: max_cpu_qlen set to 1000
[ 0.042004] raid6: sse2x1 gen() 13585 MB/s
[ 0.059003] raid6: sse2x1 xor() 9984 MB/s
[ 0.076004] raid6: sse2x2 gen() 16824 MB/s
[ 0.093000] raid6: sse2x2 xor() 11556 MB/s
[ 0.110001] raid6: sse2x4 gen() 19718 MB/s
[ 0.127001] raid6: sse2x4 xor() 11789 MB/s
[ 0.144001] raid6: avx2x1 gen() 25222 MB/s
[ 0.161001] raid6: avx2x1 xor() 17966 MB/s
[ 0.178002] raid6: avx2x2 gen() 30398 MB/s
[ 0.195002] raid6: avx2x2 xor() 19857 MB/s
[ 0.212000] raid6: avx2x4 gen() 35683 MB/s
[ 0.229002] raid6: avx2x4 xor() 18349 MB/s
[ 0.229002] raid6: using algorithm avx2x4 gen() 35683 MB/s
[ 0.229003] raid6: .... xor() 18349 MB/s, rmw enabled
[ 0.229003] raid6: using avx2x2 recovery algorithm
[ 0.229038] ACPI: Added _OSI(Module Device)
[ 0.229038] ACPI: Added _OSI(Processor Device)
[ 0.229039] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.229039] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.229040] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.257961] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.264129] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.269164] ACPI: Dynamic OEM Table Load:
[ 0.269168] ACPI: SSDT 0xFFFF93A49BA9C800 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.269449] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[ 0.270121] ACPI: Dynamic OEM Table Load:
[ 0.270125] ACPI: SSDT 0xFFFF93A49BAA4000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.270399] ACPI: Dynamic OEM Table Load:
[ 0.270402] ACPI: SSDT 0xFFFF93A49BB33300 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
[ 0.270613] ACPI: Dynamic OEM Table Load:
[ 0.270616] ACPI: SSDT 0xFFFF93A49BA9E800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422)
[ 0.271056] ACPI: Dynamic OEM Table Load:
[ 0.271061] ACPI: SSDT 0xFFFF93A49DD04000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.271673] ACPI: Dynamic OEM Table Load:
[ 0.271676] ACPI: SSDT 0xFFFF93A49BAA6C00 000317 (v02 PmRef ApHwp 00003000 INTL 20160422)
[ 0.271960] ACPI: Dynamic OEM Table Load:
[ 0.271963] ACPI: SSDT 0xFFFF93A49BAA3000 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.273890] ACPI: EC: EC started
[ 0.273890] ACPI: EC: interrupt blocked
[ 0.282044] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.282046] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.282047] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.282047] ACPI: Interpreter enabled
[ 0.282080] ACPI: (supports S0 S3 S4 S5)
[ 0.282081] ACPI: Using IOAPIC for interrupt routing
[ 0.282114] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.282515] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.301935] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.301939] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.302158] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
[ 0.302360] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
[ 0.302361] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.302794] PCI host bridge to bus 0000:00
[ 0.302796] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.302797] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.302798] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.302799] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.302800] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.302800] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.302801] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.302802] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.302803] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.302804] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.302804] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.302805] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xdfffffff window]
[ 0.302806] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.302807] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.302813] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[ 0.302897] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[ 0.302905] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 0.302909] pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
[ 0.302912] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.302921] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.303000] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.303009] pci 0000:00:04.0: reg 0x10: [mem 0xdc420000-0xdc427fff 64bit]
[ 0.303163] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.303182] pci 0000:00:14.0: reg 0x10: [mem 0xdc410000-0xdc41ffff 64bit]
[ 0.303239] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.303239] pci 0000:00:14.0: pme_poll = true
[ 0.303240] pci 0000:00:14.0: after device_set_wakeup_capable()
[ 0.303242] pci 0000:00:14.0: after pci_pme_active()
[ 0.303370] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.303388] pci 0000:00:14.2: reg 0x10: [mem 0xdc434000-0xdc434fff 64bit]
[ 0.303575] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.303664] pci 0000:00:15.0: reg 0x10: [mem 0xdc433000-0xdc433fff 64bit]
[ 0.303968] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.304028] pci 0000:00:15.1: reg 0x10: [mem 0xdc432000-0xdc432fff 64bit]
[ 0.304236] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.304250] pci 0000:00:16.0: reg 0x10: [mem 0xdc431000-0xdc431fff 64bit]
[ 0.304292] pci 0000:00:16.0: PME# supported from D3hot
[ 0.304293] pci 0000:00:16.0: pme_poll = true
[ 0.304293] pci 0000:00:16.0: after device_set_wakeup_capable()
[ 0.304296] pci 0000:00:16.0: after pci_pme_active()
[ 0.304420] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.304473] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.304474] pci 0000:00:1c.0: pme_poll = true
[ 0.304474] pci 0000:00:1c.0: after device_set_wakeup_capable()
[ 0.304476] pci 0000:00:1c.0: after pci_pme_active()
[ 0.304579] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[ 0.304631] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.304632] pci 0000:00:1c.2: pme_poll = true
[ 0.304632] pci 0000:00:1c.2: after device_set_wakeup_capable()
[ 0.304634] pci 0000:00:1c.2: after pci_pme_active()
[ 0.304738] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.304797] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.304798] pci 0000:00:1c.4: pme_poll = true
[ 0.304799] pci 0000:00:1c.4: after device_set_wakeup_capable()
[ 0.304800] pci 0000:00:1c.4: after pci_pme_active()
[ 0.304911] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.304963] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.304964] pci 0000:00:1d.0: pme_poll = true
[ 0.304964] pci 0000:00:1d.0: after device_set_wakeup_capable()
[ 0.304966] pci 0000:00:1d.0: after pci_pme_active()
[ 0.305095] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[ 0.305236] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.305248] pci 0000:00:1f.2: reg 0x10: [mem 0xdc42c000-0xdc42ffff]
[ 0.305359] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[ 0.305380] pci 0000:00:1f.3: reg 0x10: [mem 0xdc428000-0xdc42bfff 64bit]
[ 0.305402] pci 0000:00:1f.3: reg 0x20: [mem 0xdc400000-0xdc40ffff 64bit]
[ 0.305442] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.305443] pci 0000:00:1f.3: pme_poll = true
[ 0.305443] pci 0000:00:1f.3: after device_set_wakeup_capable()
[ 0.305446] pci 0000:00:1f.3: after pci_pme_active()
[ 0.305592] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.305653] pci 0000:00:1f.4: reg 0x10: [mem 0xdc430000-0xdc4300ff 64bit]
[ 0.305724] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.305940] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.305968] pci 0000:01:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff]
[ 0.306057] pci 0000:01:00.0: supports D1 D2
[ 0.306058] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.306059] pci 0000:01:00.0: pme_poll = true
[ 0.306059] pci 0000:01:00.0: after device_set_wakeup_capable()
[ 0.306063] pci 0000:01:00.0: after pci_pme_active()
[ 0.306150] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.306153] pci 0000:00:1c.0: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.306460] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
[ 0.306777] pci 0000:02:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
[ 0.307645] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.307645] pci 0000:02:00.0: pme_poll = true
[ 0.307646] pci 0000:02:00.0: after device_set_wakeup_capable()
[ 0.307649] pci 0000:02:00.0: after pci_pme_active()
[ 0.308491] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.308494] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.308565] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.308569] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
[ 0.308572] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.308634] pci 0000:6e:00.0: [1179:0116] type 00 class 0x010802
[ 0.308659] pci 0000:6e:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
[ 0.308828] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.308831] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.310015] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.310050] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.310084] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.310118] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.310152] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.310186] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.310218] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.310251] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.319118] ACPI: EC: interrupt unblocked
[ 0.319130] ACPI: EC: event unblocked
[ 0.319155] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.319156] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.319195] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.319195] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.319195] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.319195] vgaarb: loaded
[ 0.319195] SCSI subsystem initialized
[ 0.319195] libata version 3.00 loaded.
[ 0.319195] ACPI: bus type USB registered
[ 0.319195] usbcore: registered new interface driver usbfs
[ 0.319195] usbcore: registered new interface driver hub
[ 0.319195] usbcore: registered new device driver usb
[ 0.319195] EDAC MC: Ver: 3.0.0
[ 0.319300] Registered efivars operations
[ 0.353325] PCI: Using ACPI for IRQ routing
[ 0.373481] PCI: pci_cache_line_size set to 64 bytes
[ 0.373839] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.373840] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.373841] e820: reserve RAM buffer [mem 0x2d6f8000-0x2fffffff]
[ 0.373841] e820: reserve RAM buffer [mem 0x3ecf5000-0x3fffffff]
[ 0.373842] e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff]
[ 0.373842] e820: reserve RAM buffer [mem 0x4ae800000-0x4afffffff]
[ 0.374000] NetLabel: Initializing
[ 0.374000] NetLabel: domain hash size = 128
[ 0.374000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.374000] NetLabel: unlabeled traffic allowed by default
[ 0.375009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.375013] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.377011] clocksource: Switched to clocksource tsc-early
[ 0.385820] VFS: Disk quotas dquot_6.6.0
[ 0.385828] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.385860] pnp: PnP ACPI init
[ 0.386019] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.386020] system 00:00: [io 0xffff] has been reserved
[ 0.386021] system 00:00: [io 0xffff] has been reserved
[ 0.386022] system 00:00: [io 0xffff] has been reserved
[ 0.386023] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.386024] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.386027] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.386092] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.386120] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.386122] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.386199] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.386208] pnp 00:04: Plug and Play ACPI device, IDs DLL07e6 PNP0f13 (active)
[ 0.386343] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.386344] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.386345] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.386345] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.386346] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.386347] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.386348] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.386349] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.386350] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.386351] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.386353] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.386376] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.386377] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.386378] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.386379] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.386380] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.386381] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.386382] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.386384] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.386577] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.386579] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.387270] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.387271] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.387273] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.390425] pnp: PnP ACPI: found 9 devices
[ 0.395655] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.395676] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03-6d] add_size 1000
[ 0.395683] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.395685] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.395688] pci 0000:00:1c.0: bridge window [mem 0xdc300000-0xdc3fffff]
[ 0.395692] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.395695] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdc1fffff]
[ 0.395699] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[ 0.395702] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.395705] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff]
[ 0.395707] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.395711] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.395713] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.395718] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.395719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.395720] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.395721] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.395722] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.395723] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.395723] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.395724] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.395725] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.395726] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.395727] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.395728] pci_bus 0000:00: resource 15 [mem 0x4f800000-0xdfffffff window]
[ 0.395728] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[ 0.395729] pci_bus 0000:01: resource 1 [mem 0xdc300000-0xdc3fffff]
[ 0.395730] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc1fffff]
[ 0.395731] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.395732] pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff]
[ 0.395733] pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[ 0.395733] pci_bus 0000:6e: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.395820] NET: Registered protocol family 2
[ 0.395898] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.395933] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.396058] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.396147] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.396171] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.396199] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.396243] NET: Registered protocol family 1
[ 0.396251] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.396599] PCI: CLS 0 bytes, default 64
[ 0.396627] Unpacking initramfs...
[ 0.406238] Freeing initrd memory: 6476K
[ 0.406292] DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:15.0
[ 0.406293] DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.1
[ 0.406302] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.406304] software IO TLB [mem 0x33349000-0x37349000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.406331] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[ 0.406343] clocksource: Switched to clocksource tsc
[ 0.406761] alg: self-tests disabled
[ 0.407110] Initialise system trusted keyrings
[ 0.407135] workingset: timestamp_bits=37 max_order=22 bucket_order=0
[ 0.407825] zbud: loaded
[ 0.408144] pstore: using deflate compression
[ 0.408172] SELinux: Registering netfilter hooks
[ 0.408911] NET: Registered protocol family 38
[ 0.408912] Key type asymmetric registered
[ 0.408913] Asymmetric key parser 'x509' registered
[ 0.408927] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.408948] io scheduler noop registered
[ 0.408949] io scheduler deadline registered
[ 0.408971] io scheduler cfq registered (default)
[ 0.408971] io scheduler mq-deadline registered
[ 0.408972] io scheduler kyber registered
[ 0.409449] efifb: probing for efifb
[ 0.409457] efifb: framebuffer at 0x50000000, using 32448k, total 32448k
[ 0.409458] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[ 0.409458] efifb: scrolling: redraw
[ 0.409459] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.419142] Console: switching to colour frame buffer device 480x135
[ 0.428731] fb0: EFI VGA frame buffer device
[ 0.428743] intel_idle: MWAIT substates: 0x11142120
[ 0.428743] intel_idle: v0.4.1 model 0x8E
[ 0.428975] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.430369] ACPI: AC Adapter [AC] (off-line)
[ 0.430407] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.430414] ACPI: Lid Switch [LID0]
[ 0.430430] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.430434] ACPI: Power Button [PBTN]
[ 0.430452] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.430455] ACPI: Sleep Button [SBTN]
[ 0.430471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.430474] ACPI: Power Button [PWRF]
[ 0.432906] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.432906] ACPI: Thermal Zone [THM] (25 C)
[ 0.433106] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.435911] Non-volatile memory driver v1.3
[ 0.435922] Linux agpgart interface v0.103
[ 0.436938] nvme nvme0: pci function 0000:6e:00.0
[ 0.436997] libphy: Fixed MDIO Bus: probed
[ 0.437029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.437030] ehci-pci: EHCI PCI platform driver
[ 0.437050] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.437051] ohci-pci: OHCI PCI platform driver
[ 0.437054] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.437170] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.437223] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.438335] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.438342] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.438531] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 0.438532] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.438533] usb usb1: Product: xHCI Host Controller
[ 0.438534] usb usb1: Manufacturer: Linux 4.17.0-rc5-00009-g1150fc87af6f xhci-hcd
[ 0.438535] usb usb1: SerialNumber: 0000:00:14.0
[ 0.438671] hub 1-0:1.0: USB hub found
[ 0.438696] hub 1-0:1.0: 12 ports detected
[ 0.439667] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.439687] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.439689] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.439713] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[ 0.439713] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.439714] usb usb2: Product: xHCI Host Controller
[ 0.439715] usb usb2: Manufacturer: Linux 4.17.0-rc5-00009-g1150fc87af6f xhci-hcd
[ 0.439716] usb usb2: SerialNumber: 0000:00:14.0
[ 0.439763] hub 2-0:1.0: USB hub found
[ 0.439775] hub 2-0:1.0: 6 ports detected
[ 0.440240] usb: port power management may be unreliable
[ 0.441358] usbcore: registered new interface driver usb-storage
[ 0.441367] usbcore: registered new interface driver usbserial_generic
[ 0.441369] usbserial: USB Serial support registered for generic
[ 0.441383] ioremap error for 0x3f799000-0x3f79a000, requested 0x2, got 0x0
[ 0.441518] ucsi_acpi: probe of USBC000:00 failed with error -12
[ 0.441535] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.442519] i8042: Warning: Keylock active
[ 0.446387] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.446389] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.446516] mousedev: PS/2 mouse device common for all mice
[ 0.446952] rtc_cmos 00:01: RTC can wake from S4
[ 0.447528] rtc_cmos 00:01: registered as rtc0
[ 0.447536] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.447558] device-mapper: uevent: version 1.0.3
[ 0.447614] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 0.447664] intel_pstate: Intel P-state driver initializing
[ 0.448043] intel_pstate: HWP enabled
[ 0.448248] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.448268] usbcore: registered new interface driver usbhid
[ 0.448269] usbhid: USB HID core driver
[ 0.448330] intel_pmc_core: initialized
[ 0.448688] Initializing XFRM netlink socket
[ 0.448766] NET: Registered protocol family 10
[ 0.448911] Segment Routing with IPv6
[ 0.448940] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.448974] mip6: Mobile IPv6
[ 0.450004] NET: Registered protocol family 17
[ 0.450739] microcode: sig=0x806ea, pf=0x80, revision=0x84
[ 0.450848] microcode: Microcode Update Driver: v2.2.
[ 0.450852] AVX2 version of gcm_enc/dec engaged.
[ 0.450853] AES CTR mode by8 optimization enabled
[ 0.451041] sched_clock: Marking stable (451038847, 0)->(450021780, 1017067)
[ 0.451226] registered taskstats version 1
[ 0.451227] Loading compiled-in X.509 certificates
[ 0.452552] Loaded X.509 cert 'Build time autogenerated kernel key: 6966fbaf5de1e180c576cd612d99a08fe8d73af3'
[ 0.452563] zswap: loaded using pool lzo/zbud
[ 0.452751] Btrfs loaded, crc32c=crc32c-generic
[ 0.454983] Key type big_key registered
[ 0.508343] Magic number: 2:425:483
[ 0.508643] rtc_cmos 00:01: setting system clock to 2018-05-15 13:27:31 UTC (1526390851)
[ 0.528456] ACPI: Battery Slot [BAT0] (battery present)
[ 0.653407] nvme0n1: p1 p2 p3 p4
[ 0.721821] Freeing unused kernel memory: 1660K
[ 0.731222] Write protecting the kernel read-only data: 18432k
[ 0.732177] Freeing unused kernel memory: 2008K
[ 0.732443] Freeing unused kernel memory: 196K
[ 0.735951] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.735955] rodata_test: all tests were successful
[ 0.763013] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 0.936076] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=76.05
[ 0.936081] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 0.936084] usb 1-5: Product: Integrated_Webcam_HD
[ 0.936088] usb 1-5: Manufacturer: CN0FFMHCLOG0081JBA49A00
[ 0.936090] usb 1-5: SerialNumber: 200901010001
[ 1.000094] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.020933] random: fast init done
[ 1.054218] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.181185] usb 1-7: New USB device found, idVendor=0489, idProduct=e0a2, bcdDevice= 0.01
[ 1.181192] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.238878] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[ 1.267602] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[ 1.267611] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 1.324574] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 3038, fw id: 2375007
[ 1.360520] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 17.155025] random: crng init done
[ 21.463481] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 21.668031] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 21.680517] systemd[1]: Detected architecture x86-64.
[ 21.683605] systemd[1]: Set hostname to <palestrina.molgen.mpg.de>.
[ 21.723732] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 21.723739] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 21.823713] systemd[1]: Listening on Process Core Dump Socket.
[ 21.823804] systemd[1]: Reached target Remote File Systems.
[ 21.825705] systemd[1]: Created slice User and Session Slice.
[ 21.825733] systemd[1]: Reached target Slices.
[ 21.825748] systemd[1]: Reached target Swap.
[ 21.852224] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 21.922193] systemd-journald[305]: Received request to flush runtime journal from PID 1
[ 21.944663] input: Intel HID events as /devices/platform/INT33D5:00/input/input7
[ 21.944782] intel-hid INT33D5:00: platform supports 5 button array
[ 21.944814] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input8
[ 21.978794] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ 21.986288] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 21.986328] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 21.994346] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 22.009329] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 22.021102] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 22.021471] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 22.022434] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 22.022666] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 22.023159] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 22.023161] cfg80211: failed to load regulatory.db
[ 22.041534] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 22.041535] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 22.041536] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 22.041536] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 22.041537] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 22.041537] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 22.048944] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 22.049240] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 22.060816] 1
[ 22.060823] 2
[ 22.060830] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 22.060962] 3
[ 22.060962] 4
[ 22.060963] 5
[ 22.060963] 6
[ 22.060963] 7
[ 22.060967] 8
[ 22.060967] 9
[ 22.096753] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 22.120826] checking generic (50000000 1fb0000) vs hw (50000000 10000000)
[ 22.120827] fb: switching to inteldrmfb from EFI VGA
[ 22.120845] Console: switching to colour dummy device 80x25
[ 22.120918] [drm] Replacing VGA console driver
[ 22.121910] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 22.121911] [drm] Driver supports precise vblank timestamp query.
[ 22.122443] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 22.124085] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 22.132888] intel_rapl: Found RAPL domain package
[ 22.132889] intel_rapl: Found RAPL domain core
[ 22.132890] intel_rapl: Found RAPL domain uncore
[ 22.132890] intel_rapl: Found RAPL domain dram
[ 22.133067] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 22.133236] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[ 22.136799] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 22.137683] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 22.138676] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 22.138804] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 22.145149] fbcon: inteldrmfb (fb0) is primary device
[ 22.255580] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input10
[ 22.255853] hid-generic 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[ 22.351615] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[ 22.351642] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[ 22.354511] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:143a
[ 22.354514] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 22.355712] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
[ 22.410243] input: DELL07E6:00 06CB:76AF as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input11
[ 22.410334] hid-generic 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 22.420507] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 20d869c3
[ 22.447526] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input12
[ 22.447790] hid-multitouch 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[ 22.475575] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input18
[ 22.475661] hid-multitouch 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 23.002504] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 23.005391] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 23.009537] ath10k_pci 0000:02:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 23.072306] ath: EEPROM regdomain: 0x6c
[ 23.072307] ath: EEPROM indicates we should expect a direct regpair map
[ 23.072309] ath: Country alpha2 being used: 00
[ 23.072309] ath: Regpair used: 0x6c
[ 23.080576] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 23.301366] Console: switching to colour frame buffer device 480x135
[ 23.349474] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 23.402676] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 23.402679] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 23.402682] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 23.402683] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 23.402685] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 23.402687] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 23.402689] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b
[ 23.402691] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 23.453341] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 23.453389] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 23.453432] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 23.453479] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 23.453528] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 23.453575] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[ 23.535785] NET: Registered protocol family 15
[ 23.606545] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 24.298625] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 24.301721] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 24.320610] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 24.705958] fuse init (API version 7.26)
[ 25.077658] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 25.079183] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 25.113756] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 25.168982] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 30.028947] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 34.891197] wlp2s0: authenticate with 6c:f3:7f:10:ae:18
[ 34.936959] wlp2s0: send auth to 6c:f3:7f:10:ae:18 (try 1/3)
[ 34.938846] wlp2s0: authenticated
[ 34.939075] wlp2s0: associate with 6c:f3:7f:10:ae:18 (try 1/3)
[ 34.943591] wlp2s0: RX AssocResp from 6c:f3:7f:10:ae:18 (capab=0x411 status=0 aid=3)
[ 34.945739] wlp2s0: associated
[ 40.011184] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2018-05-15 16:35    [W:0.218 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site