lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 6/6] tty/serial: atmel: changed the driver to work under at91-usart mfd
From
Date
On 15/05/2018 14:47, Radu Pirea wrote:
> On Mon, 2018-05-14 at 12:57 +0200, Richard Genoud wrote:
>> After your patch, the DMA is not selected anymore:
>> atmel_usart_serial atmel_usart_serial.0.auto: TX channel not
>> available, switch to pio
>> instead of:
>> atmel_usart fffff200.serial: using dma1chan2 for tx DMA transfers
>>
> Fixed.
>> And the kernel doesn't log anymore on the serial console, despite the
>> loglevel=8
>> (after reverting this series, the kernel logs reappears on the serial
>> console)
>>
> Which serial are you using as console?
fffff200.serial (sam9g35-cm)
( stdout-path = "serial0:115200n8"; in the DTS )

With this series applied, all the kernel log goes on the screen.
Without, it goes on the serial debug.

>> (tests done on sam9g35)
>>
> I will consider the rest of suggestions.
>> regards,
>> Richard

\
 
 \ /
  Last update: 2018-05-15 15:15    [W:0.120 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site