lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: exynos: fix type of thermal trip points for Exynos7
Date
Currently Exynos thermal driver treats as "active" all specified
trip points before reaching maximum number of hardware supported
trip points. Moreover polling-delay-passive is specified as "0"
in exynos7.dtsi (IOW passive polling is disabled). Therefore fix
type of cpu-alert-0 to cpu-alert6 trip points to be "active"
instead of "passive" (cpu-alert-7 type is "critical" so it
doesn't need a fixup).

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

Index: b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
===================================================================
--- a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi 2018-05-15 13:57:55.822172496 +0200
+++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi 2018-05-15 14:23:12.594016481 +0200
@@ -10,37 +10,37 @@ trips {
cpu-alert-0 {
temperature = <75000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-1 {
temperature = <80000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-2 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-3 {
temperature = <90000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-4 {
temperature = <95000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-5 {
temperature = <100000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-6 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-crit-0 {
temperature = <115000>; /* millicelsius */
\
 
 \ /
  Last update: 2018-05-15 14:38    [W:0.056 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site