lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] mmc: meson-gx: add device reset
Date
Trigger the reset line of the mmc controller while probing, if available.
The reset should be optional for now, at least until all related DT nodes
have the reset property.

Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/mmc/host/meson-gx-mmc.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 4f972b879fe6..9bca359f7936 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -35,6 +35,7 @@
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
#include <linux/interrupt.h>
#include <linux/bitfield.h>
#include <linux/pinctrl/consumer.h>
@@ -1184,6 +1185,14 @@ static int meson_mmc_probe(struct platform_device *pdev)
goto free_host;
}

+ ret = device_reset_optional(&pdev->dev);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "device reset failed: %d\n", ret);
+
+ return ret;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->regs)) {
--
2.14.3
\
 
 \ /
  Last update: 2018-05-15 11:59    [W:0.078 / U:2.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site