lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] ARM64: dts: meson-gxbb: odroidc2: enable sdcard UHS modes
Hi Jerome

On 14 May 2018 at 19:18, Jerome Brunet <jbrunet@baylibre.com> wrote:
> On Wed, 2018-05-02 at 00:29 +0530, Anand Moon wrote:
>> Enable UHS modes for sdcard, on odroidc2.
>>
>> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
>> index 54954b314a45..c90f8b46c60c 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
>> @@ -258,6 +258,11 @@
>> cap-sd-highspeed;
>> max-frequency = <100000000>;
>> disable-wp;
>> + sd-uhs-sdr12;
>> + sd-uhs-sdr25;
>> + sd-uhs-sdr50;
>> + sd-uhs-sdr104;
>> + sd-uhs-ddr50;
>>
>> cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
>> cd-inverted;
>
> Hi Anand,
>
> I tried a few sdcards on the OC2 with your 2 patches.
> Like with the libretech-cc, sdr104@200Mhz works "mostly", but, with some
> sdcards, it does not - please see below. The same sdcards appear to be working
> fine on my laptop.
>
> This is something I have not been able to crack yet on the libretech-cc.
>
> I'd suggest dropping sdr104 and keeping the max frequency at 100Mhz until we can
> figure out the problem here.
>
> With this changed:
>
> Tested-by: Jerome Brunet <jbrunet@baylibre.com>
>
> dd if=/dev/mmcblk1 of=/dev/zero bs=4M
> [ 446.925817] mmc1: tuning execution failed: -5
> [ 446.956597] mmc1: tuning execution failed: -5
> [ 489.957810] print_req_error: I/O error, dev mmcblk1, sector 6654424
> [ 490.141975] print_req_error: I/O error, dev mmcblk1, sector 6656440
> [ 490.148304] print_req_error: I/O error, dev mmcblk1, sector 6656944
> [ 490.349650] print_req_error: I/O error, dev mmcblk1, sector 6658456
> [ 491.804382] print_req_error: I/O error, dev mmcblk1, sector 6747688
> [ 492.281246] print_req_error: I/O error, dev mmcblk1, sector 6784992
> [ 492.419034] print_req_error: I/O error, dev mmcblk1, sector 6785496
> [ 492.865878] print_req_error: I/O error, dev mmcblk1, sector 6791800
> [ 493.023809] print_req_error: I/O error, dev mmcblk1, sector 6792192
> [ 493.024435] Buffer I/O error on dev mmcblk1, logical block 849024, async page
> read
> [ 493.217751] print_req_error: I/O error, dev mmcblk1, sector 6792808
> [ 494.891779] mmc1: tuning execution failed: -5
> [ 495.374186] print_req_error: 3 callbacks suppressed
> [ 495.374193] print_req_error: I/O error, dev mmcblk1, sector 6854576
> [ 495.767498] print_req_error: I/O error, dev mmcblk1, sector 6860000
> [ 496.013104] print_req_error: I/O error, dev mmcblk1, sector 6863024
> [ 496.223042] print_req_error: I/O error, dev mmcblk1, sector 6864032
> [ 496.227003] print_req_error: I/O error, dev mmcblk1, sector 6864536
> [ 496.375175] print_req_error: I/O error, dev mmcblk1, sector 6864176
> [ 496.375806] Buffer I/O error on dev mmcblk1, logical block 858022, async page
> read
> [ 496.521229] print_req_error: I/O error, dev mmcblk1, sector 6864184
> [ 496.521852] Buffer I/O error on dev mmcblk1, logical block 858023, async page
> read
> [ 503.596978] print_req_error: I/O error, dev mmcblk1, sector 6983312
> [ 503.597606] Buffer I/O error on dev mmcblk1, logical block 872914, async page
> read
> [ 505.280621] print_req_error: I/O error, dev mmcblk1, sector 7004536
> [ 505.281249] Buffer I/O error on dev mmcblk1, logical block 875567, async page
> read
> [ 507.372560] print_req_error: I/O error, dev mmcblk1, sector 7048696
> [ 507.373192] Buffer I/O error on dev mmcblk1, logical block 881087, async page
> read
> [ 511.355248] print_req_error: I/O error, dev mmcblk1, sector 7131352
> [ 511.355883] Buffer I/O error on dev mmcblk1, logical block 891419, async page
> read
> [ 511.369076] print_req_error: I/O error, dev mmcblk1, sector 7131352
> [ 511.369694] Buffer I/O error on dev mmcblk1, logical block 891419, async page
> read
> dd: error reading '/dev/mmcblk1': Input/output error
> 868+7 records in
> 868+7 records out
> 3651252224 bytes (3.7 GB, 3.4 GiB) copied, 66.7736 s, 54.7 MB/s


Thank for your testing, I will also do some more testing on all the
sdcard and share you the result..

Mean while Sandisk Ultra microSDHC UHS-I card @A1 32GB shows.

On my Odroid C2:

[ 1.165784] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 1.403756] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 1.456160] Waiting for root device /dev/mmcblk1p2...
[ 1.608180] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 1.610002] mmcblk1: mmc1:aaaa JULIE 29.7 GiB
[ 1.617811] mmcblk1: p1 p2

Also I did not encounter and read/write failure on the sdcard but I
will re-test them.

root@odroid64:~# dd if=/dev/mmcblk1 of=/dev/zero bs=4M
7609+1 records in
7609+1 records out
31914983424 bytes (32 GB, 30 GiB) copied, 368.637 s, 86.6 MB/s
root@odroid64:~#

Best Regards
-Anand

\
 
 \ /
  Last update: 2018-05-15 07:35    [W:0.177 / U:6.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site