lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: dts: imx51-zii-rdu1: limit usbh1 to full-speed
From
Date
Am Dienstag, den 15.05.2018, 11:45 +0300 schrieb Nikita Yushchenko:
> On RDU1, imx51 usbh1 interface is either not used, or used via
> external
> block that breaks USB2 signalling.
>
> To keep things working if high-speed device gets connected to that
> block, use ChipIdea feature to limit port to full speed.
>
> Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  arch/arm/boot/dts/imx51-zii-rdu1.dts | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts
> b/arch/arm/boot/dts/imx51-zii-rdu1.dts
> index 36a63ae52e48..c26f053f29b0 100644
> --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
> +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
> @@ -603,6 +603,7 @@
>   phy_type = "ulpi";
>   fsl,usbphy = <&usbh1phy>;
>   disable-over-current;
> + maximum-speed = "full-speed";
>   vbus-supply = <&reg_5p0v_main>;
>   status = "okay";
>  };

\
 
 \ /
  Last update: 2018-05-15 10:53    [W:0.075 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site