lkml.org 
[lkml]   [2018]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: imx6qdl-phytec-pfla02: Use IRQ_TYPE specifier
On Sun, May 13, 2018 at 08:28:35PM -0300, Hernán Gonzalez wrote:
> Replace magic number with the proper IRQ_TYPE specifier to improve DT
> readability.
>
> Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
> ---
> arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> index c58f344..1b79ee7 100644
> --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> @@ -115,7 +115,7 @@
> compatible = "dlg,da9063";
> reg = <0x58>;
> interrupt-parent = <&gpio2>;
> - interrupts = <9 0x8>; /* active-low GPIO2_9 */
> + interrupts = <9 IRQ_TYPE_LOW_LEVEL>; /* active-low GPIO2_9 */

It should be IRQ_TYPE_LEVEL_LOW. I fixed it up and applied the patch.

Shawn

>
> regulators {
> vddcore_reg: bcore1 {
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-05-15 09:13    [W:0.033 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site