[lkml]   [2018]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [BUG] i2c-hid: ELAN Touchpad does not work on ASUS X580GD
On 05/10/2018 03:03 PM, Chris Chiu wrote:
> Report from guys who can access scope. If i2c-sda-falling-time-ns=400ns
> , HCNT increase to 117, the SCL high duration is 576ns as follows
> The original SCL high duration (HCNT = 105, 120MHz) is as follows
> So the HCNT does affect but per this HCNT/LCNT value, just not 400kHz
> as expected. Any suggestion?
Thanks for measurements. I was sidetracked last week so I don't have yet
explanation why signals run faster than expected :-(

Using 120 MHz SPT I2C clocks in commit b418bbff36dd ("mfd: intel-lpss:
Add Intel Cannonlake PCI IDs") is clearly wrong but before going to 133
MHz (which work for you but still runs too fast) I would like to find
explanation why it appears to be much higher.


 \ /
  Last update: 2018-05-14 16:20    [W:0.071 / U:2.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site