lkml.org 
[lkml]   [2018]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: vf-colibri-eval-v3.dtsi: Use IRQ_TYPE specifier
Date
GPIO_ACTIVE_LOW was being used to specify an interrupt, use
IRQ_TYPE_EDGE_RISING instead. This improves DT readability.

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
---
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index d8b2972..e2da122 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -117,7 +117,7 @@
clocks = <&clk16m>;
spi-max-frequency = <10000000>;
interrupt-parent = <&gpio1>;
- interrupts = <11 GPIO_ACTIVE_LOW>;
+ interrupts = <11 IRQ_TYPE_EDGE_RISING>;
};
};

--
2.7.4
\
 
 \ /
  Last update: 2018-05-14 01:25    [W:0.043 / U:2.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site