lkml.org 
[lkml]   [2018]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] soc: bcm: brcmstb: Add missing DDR MEMC compatible strings
Date
We would not be matching the following chip/compatible strings
combinations, which would lead to not setting the warm boot flag
correctly, fix that:

7260A0/B0: brcm,brcmstb-memc-ddr-rev-b.2.1
7255A0: brcm,brcmstb-memc-ddr-rev-b.2.3
7278Bx: brcm,brcmstb-memc-ddr-rev-b.3.1

The B2.1 core (which is in 7260 A0 and B0) doesn't have the
SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL setup in the memsys init code, nor
does it have the warm boot flag re-definition on entry. Those changes
were for B2.2 and later MEMSYS cores. Fall back to the previous S2/S3
entry method for these specific chips.

Fixes: 0b741b8234c8 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt | 3 +++
drivers/soc/bcm/brcmstb/pm/pm-arm.c | 12 ++++++++++++
2 files changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index fb762059e68e..104cc9b41df4 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -189,8 +189,11 @@ Power-Down (SRPD), among other things.

Required properties:
- compatible : should contain one of these
+ "brcm,brcmstb-memc-ddr-rev-b.2.1"
"brcm,brcmstb-memc-ddr-rev-b.2.2"
+ "brcm,brcmstb-memc-ddr-rev-b.2.3"
"brcm,brcmstb-memc-ddr-rev-b.3.0"
+ "brcm,brcmstb-memc-ddr-rev-b.3.1"
"brcm,brcmstb-memc-ddr"
- reg : the MEMC DDR register range

diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
index ade724677238..a5577dd5eb08 100644
--- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@@ -627,14 +627,26 @@ static const struct of_device_id ddr_shimphy_dt_ids[] = {
};

static const struct of_device_id brcmstb_memc_of_match[] = {
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.1",
+ .data = &ddr_seq,
+ },
{
.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.2",
.data = &ddr_seq_b22,
},
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.3",
+ .data = &ddr_seq_b22,
+ },
{
.compatible = "brcm,brcmstb-memc-ddr-rev-b.3.0",
.data = &ddr_seq_b22,
},
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.3.1",
+ .data = &ddr_seq_b22,
+ },
{
.compatible = "brcm,brcmstb-memc-ddr",
.data = &ddr_seq,
--
2.14.1
\
 
 \ /
  Last update: 2018-05-12 00:04    [W:0.107 / U:1.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site