lkml.org 
[lkml]   [2018]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3] net: phy: DP83TC811: Introduce support for the DP83TC811 phy
From
From: Dan Murphy <dmurphy@ti.com>
Date: Fri, 11 May 2018 13:08:19 -0500

> Add support for the DP83811 phy.
>
> The DP83811 supports both rgmii and sgmii interfaces.
> There are 2 part numbers for this the DP83TC811R does not
> reliably support the SGMII interface but the DP83TC811S will.
>
> There is not a way to differentiate these parts from the
> hardware or register set. So this is controlled via the DT
> to indicate which phy mode is required. Or the part can be
> strapped to a certain interface.
>
> Data sheet can be found here:
> http://www.ti.com/product/DP83TC811S-Q1/description
> http://www.ti.com/product/DP83TC811R-Q1/description
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>

Applied to net-next, thank you.

\
 
 \ /
  Last update: 2018-05-11 22:37    [W:0.074 / U:0.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site