[lkml]   [2018]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v3] net: phy: DP83TC811: Introduce support for the DP83TC811 phy

On 05/11/2018 01:30 PM, Andrew Lunn wrote:
> On Fri, May 11, 2018 at 01:08:19PM -0500, Dan Murphy wrote:
>> Add support for the DP83811 phy.
>> The DP83811 supports both rgmii and sgmii interfaces.
>> There are 2 part numbers for this the DP83TC811R does not
>> reliably support the SGMII interface but the DP83TC811S will.
>> There is not a way to differentiate these parts from the
>> hardware or register set. So this is controlled via the DT
>> to indicate which phy mode is required. Or the part can be
>> strapped to a certain interface.
>> Data sheet can be found here:
>> Signed-off-by: Dan Murphy <>
> Hi Dan
> It is normal to add any Reviewed-by, or Tested-by: tags you received,
> so long as you don't make major changes.

Thanks for the reminder.

I usually add them if I get them explicitly stated in the review.

I have not seen any Reviewed-by or Tested-by tags in any of the replies for the
patch. But I may have missed it.


> Andrew

Dan Murphy

 \ /
  Last update: 2018-05-11 20:52    [W:0.076 / U:5.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site