lkml.org 
[lkml]   [2018]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/18] x86: Remove pr_fmt duplicate logging prefixes
Date
Converting pr_fmt from a default simple #define to use KBUILD_MODNAME
added some duplicate prefixes.

Remove the duplicate prefixes.

Signed-off-by: Joe Perches <joe@perches.com>
---
arch/x86/events/amd/ibs.c | 2 +-
arch/x86/kernel/e820.c | 32 +++++++++++++++++---------------
arch/x86/kernel/hpet.c | 5 ++---
arch/x86/kernel/uprobes.c | 4 ++--
arch/x86/mm/numa.c | 22 +++++++++++-----------
5 files changed, 33 insertions(+), 32 deletions(-)

diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 786fd875de92..4b98101209a1 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -889,7 +889,7 @@ static void force_ibs_eilvt_setup(void)
if (!ibs_eilvt_valid())
goto out;

- pr_info("IBS: LVT offset %d assigned\n", offset);
+ pr_info("LVT offset %d assigned\n", offset);

return;
out:
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 6a2cb1442e05..d1f25c831447 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -155,7 +155,8 @@ static void __init __e820__range_add(struct e820_table *table, u64 start, u64 si
int x = table->nr_entries;

if (x >= ARRAY_SIZE(table->entries)) {
- pr_err("e820: too many entries; ignoring [mem %#010llx-%#010llx]\n", start, start + size - 1);
+ pr_err("too many entries; ignoring [mem %#010llx-%#010llx]\n",
+ start, start + size - 1);
return;
}

@@ -190,9 +191,10 @@ void __init e820__print_table(char *who)
int i;

for (i = 0; i < e820_table->nr_entries; i++) {
- pr_info("%s: [mem %#018Lx-%#018Lx] ", who,
- e820_table->entries[i].addr,
- e820_table->entries[i].addr + e820_table->entries[i].size - 1);
+ pr_info("%s: [mem %#018Lx-%#018Lx] ",
+ who,
+ e820_table->entries[i].addr,
+ e820_table->entries[i].addr + e820_table->entries[i].size - 1);

e820_print_type(e820_table->entries[i].type);
pr_cont("\n");
@@ -574,7 +576,7 @@ void __init e820__update_table_print(void)
if (e820__update_table(e820_table))
return;

- pr_info("e820: modified physical RAM map:\n");
+ pr_info("modified physical RAM map:\n");
e820__print_table("modified");
}

@@ -636,9 +638,8 @@ __init void e820__setup_pci_gap(void)
if (!found) {
#ifdef CONFIG_X86_64
gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
- pr_err(
- "e820: Cannot find an available gap in the 32-bit address range\n"
- "e820: PCI devices with unassigned 32-bit BARs may not work!\n");
+ pr_err("Cannot find an available gap in the 32-bit address range\n");
+ pr_err("PCI devices with unassigned 32-bit BARs may not work!\n");
#else
gapstart = 0x10000000;
#endif
@@ -649,7 +650,8 @@ __init void e820__setup_pci_gap(void)
*/
pci_mem_start = gapstart;

- pr_info("e820: [mem %#010lx-%#010lx] available for PCI devices\n", gapstart, gapstart + gapsize - 1);
+ pr_info("[mem %#010lx-%#010lx] available for PCI devices\n",
+ gapstart, gapstart + gapsize - 1);
}

/*
@@ -711,7 +713,7 @@ void __init e820__memory_setup_extended(u64 phys_addr, u32 data_len)
memcpy(e820_table_firmware, e820_table, sizeof(*e820_table_firmware));

early_memunmap(sdata, data_len);
- pr_info("e820: extended physical RAM map:\n");
+ pr_info("extended physical RAM map:\n");
e820__print_table("extended");
}

@@ -780,7 +782,7 @@ u64 __init e820__memblock_alloc_reserved(u64 size, u64 align)
addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
if (addr) {
e820__range_update_kexec(addr, size, E820_TYPE_RAM, E820_TYPE_RESERVED);
- pr_info("e820: update e820_table_kexec for e820__memblock_alloc_reserved()\n");
+ pr_info("update e820_table_kexec for e820__memblock_alloc_reserved()\n");
e820__update_table_kexec();
}

@@ -830,8 +832,8 @@ static unsigned long __init e820_end_pfn(unsigned long limit_pfn, enum e820_type
if (last_pfn > max_arch_pfn)
last_pfn = max_arch_pfn;

- pr_info("e820: last_pfn = %#lx max_arch_pfn = %#lx\n",
- last_pfn, max_arch_pfn);
+ pr_info("last_pfn = %#lx max_arch_pfn = %#lx\n",
+ last_pfn, max_arch_pfn);
return last_pfn;
}

@@ -1005,7 +1007,7 @@ void __init e820__finish_early_params(void)
if (e820__update_table(e820_table) < 0)
early_panic("Invalid user supplied memory map");

- pr_info("e820: user-defined physical RAM map:\n");
+ pr_info("user-defined physical RAM map:\n");
e820__print_table("user");
}
}
@@ -1238,7 +1240,7 @@ void __init e820__memory_setup(void)
memcpy(e820_table_kexec, e820_table, sizeof(*e820_table_kexec));
memcpy(e820_table_firmware, e820_table, sizeof(*e820_table_firmware));

- pr_info("e820: BIOS-provided physical RAM map:\n");
+ pr_info("BIOS-provided physical RAM map:\n");
e820__print_table(who);
}

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 8ce4212e2b8d..b6be34ee88e9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -975,8 +975,7 @@ int __init hpet_enable(void)
cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
hpet_writel(cfg, HPET_CFG);
if (cfg)
- pr_warn("HPET: Unrecognized bits %#x set in global cfg\n",
- cfg);
+ pr_warn("Unrecognized bits %#x set in global cfg\n", cfg);

for (i = 0; i <= last; ++i) {
cfg = hpet_readl(HPET_Tn_CFG(i));
@@ -988,7 +987,7 @@ int __init hpet_enable(void)
| HPET_TN_64BIT_CAP | HPET_TN_32BIT | HPET_TN_ROUTE
| HPET_TN_FSB | HPET_TN_FSB_CAP);
if (cfg)
- pr_warn("HPET: Unrecognized bits %#x set in cfg#%u\n",
+ pr_warn("Unrecognized bits %#x set in cfg#%u\n",
cfg, i);
}
hpet_print_config();
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 85c7ef23d99f..d1c468741915 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -1079,8 +1079,8 @@ arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs
return orig_ret_vaddr;

if (nleft != rasize) {
- pr_err("uprobe: return address clobbered: pid=%d, %%sp=%#lx, "
- "%%ip=%#lx\n", current->pid, regs->sp, regs->ip);
+ pr_err("return address clobbered: pid=%d, %%sp=%#lx, %%ip=%#lx\n",
+ current->pid, regs->sp, regs->ip);

force_sig_info(SIGSEGV, SEND_SIG_FORCED, current);
}
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 25504d5aa816..fa150855647c 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -136,13 +136,13 @@ static int __init numa_add_memblk_to(int nid, u64 start, u64 end,

/* whine about and ignore invalid blks */
if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
- pr_warning("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
- nid, start, end - 1);
+ pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
+ nid, start, end - 1);
return 0;
}

if (mi->nr_blks >= NR_NODE_MEMBLKS) {
- pr_err("NUMA: too many memblk ranges\n");
+ pr_err("too many memblk ranges\n");
return -EINVAL;
}

@@ -267,14 +267,14 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
*/
if (bi->end > bj->start && bi->start < bj->end) {
if (bi->nid != bj->nid) {
- pr_err("NUMA: node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
+ pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",
bi->nid, bi->start, bi->end - 1,
bj->nid, bj->start, bj->end - 1);
return -EINVAL;
}
- pr_warning("NUMA: Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
- bi->nid, bi->start, bi->end - 1,
- bj->start, bj->end - 1);
+ pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",
+ bi->nid, bi->start, bi->end - 1,
+ bj->start, bj->end - 1);
}

/*
@@ -364,7 +364,7 @@ static int __init numa_alloc_distance(void)
phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
size, PAGE_SIZE);
if (!phys) {
- pr_warning("NUMA: Warning: can't allocate distance table!\n");
+ pr_warn("Warning: can't allocate distance table!\n");
/* don't retry until explicitly reset */
numa_distance = (void *)1LU;
return -ENOMEM;
@@ -410,14 +410,14 @@ void __init numa_set_distance(int from, int to, int distance)

if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
from < 0 || to < 0) {
- pr_warn_once("NUMA: Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
- from, to, distance);
+ pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
+ from, to, distance);
return;
}

if ((u8)distance != distance ||
(from == to && distance != LOCAL_DISTANCE)) {
- pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
+ pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
from, to, distance);
return;
}
--
2.15.0
\
 
 \ /
  Last update: 2018-05-10 17:47    [W:0.141 / U:4.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site