[lkml]   [2018]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2] net: phy: marvell: Enable interrupt function on LED2 pin
On Thu, Apr 05, 2018 at 10:40:29PM +0200, Esben Haabendal wrote:
> From: Esben Haabendal <>
> The LED2[2]/INTn pin on Marvell 88E1318S as well as 88E1510/12/14/18 needs
> to be configured to be usable as interrupt not only when WOL is enabled,
> but whenever we rely on interrupts from the PHY.
> Signed-off-by: Esben Haabendal <>
> Cc: Rasmus Villemoes <>

Reviewed-by: Andrew Lunn <>


 \ /
  Last update: 2018-04-06 19:30    [W:0.102 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site