lkml.org 
[lkml]   [2018]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] powerpc/embedded6xx: Remove C2K board support
Date
The C2K platform appears to be orphaned so remove code supporting it.

CC: Remi Machet <rmachet@nvidia.com>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
---
arch/powerpc/boot/Makefile | 5 +-
arch/powerpc/boot/cuboot-c2k.c | 189 --------------
arch/powerpc/boot/dts/c2k.dts | 366 --------------------------
arch/powerpc/configs/c2k_defconfig | 390 ----------------------------
arch/powerpc/platforms/embedded6xx/Kconfig | 10 -
arch/powerpc/platforms/embedded6xx/Makefile | 1 -
arch/powerpc/platforms/embedded6xx/c2k.c | 148 -----------
7 files changed, 2 insertions(+), 1107 deletions(-)
delete mode 100644 arch/powerpc/boot/cuboot-c2k.c
delete mode 100644 arch/powerpc/boot/dts/c2k.dts
delete mode 100644 arch/powerpc/configs/c2k_defconfig
delete mode 100644 arch/powerpc/platforms/embedded6xx/c2k.c

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 26d5d2a5b8e9..70bf9b409fae 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -143,8 +143,8 @@ src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
- cuboot-c2k.c gamecube-head.S \
- gamecube.c wii-head.S wii.c holly.c \
+ gamecube-head.S gamecube.c \
+ wii-head.S wii.c holly.c \
fixed-head.S mvme5100.c
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
@@ -339,7 +339,6 @@ image-$(CONFIG_MVME7100) += dtbImage.mvme7100
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
-image-$(CONFIG_PPC_C2K) += cuImage.c2k
image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
image-$(CONFIG_WII) += dtbImage.wii
image-$(CONFIG_MVME5100) += dtbImage.mvme5100
diff --git a/arch/powerpc/boot/cuboot-c2k.c b/arch/powerpc/boot/cuboot-c2k.c
deleted file mode 100644
index 9309c51f1d65..000000000000
--- a/arch/powerpc/boot/cuboot-c2k.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * GEFanuc C2K platform code.
- *
- * Author: Remi Machet <rmachet@slac.stanford.edu>
- *
- * Originated from prpmc2800.c
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "types.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "elf.h"
-#include "mv64x60.h"
-#include "cuboot.h"
-#include "ppcboot.h"
-
-static u8 *bridge_base;
-
-static void c2k_bridge_setup(u32 mem_size)
-{
- u32 i, v[30], enables, acc_bits;
- u32 pci_base_hi, pci_base_lo, size, buf[2];
- unsigned long cpu_base;
- int rc;
- void *devp, *mv64x60_devp;
- u8 *bridge_pbase, is_coherent;
- struct mv64x60_cpu2pci_win *tbl;
- int bus;
-
- bridge_pbase = mv64x60_get_bridge_pbase();
- is_coherent = mv64x60_is_coherent();
-
- if (is_coherent)
- acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
- | MV64x60_PCI_ACC_CNTL_SWAP_NONE
- | MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
- | MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
- else
- acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
- | MV64x60_PCI_ACC_CNTL_SWAP_NONE
- | MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
- | MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
- mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
- mv64x60_devp = find_node_by_compatible(NULL, "marvell,mv64360");
- if (mv64x60_devp == NULL)
- fatal("Error: Missing marvell,mv64360 device tree node\n\r");
-
- enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
- enables |= 0x007ffe00; /* Disable all cpu->pci windows */
- out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
-
- /* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = NULL;
- for (bus = 0; ; bus++) {
- char name[] = "pci ";
-
- name[strlen(name)-1] = bus+'0';
-
- devp = find_node_by_alias(name);
- if (devp == NULL)
- break;
-
- if (bus >= 2)
- fatal("Error: Only 2 PCI controllers are supported at" \
- " this time.\n");
-
- mv64x60_config_pci_windows(bridge_base, bridge_pbase, bus, 0,
- mem_size, acc_bits);
-
- rc = getprop(devp, "ranges", v, sizeof(v));
- if (rc == 0)
- fatal("Error: Can't find marvell,mv64360-pci ranges"
- " property\n\r");
-
- /* Get the cpu -> pci i/o & mem mappings from the device tree */
-
- for (i = 0; i < rc; i += 6) {
- switch (v[i] & 0xff000000) {
- case 0x01000000: /* PCI I/O Space */
- tbl = mv64x60_cpu2pci_io;
- break;
- case 0x02000000: /* PCI MEM Space */
- tbl = mv64x60_cpu2pci_mem;
- break;
- default:
- continue;
- }
-
- pci_base_hi = v[i+1];
- pci_base_lo = v[i+2];
- cpu_base = v[i+3];
- size = v[i+5];
-
- buf[0] = cpu_base;
- buf[1] = size;
-
- if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
- fatal("Error: Can't translate PCI address " \
- "0x%x\n\r", (u32)cpu_base);
-
- mv64x60_config_cpu2pci_window(bridge_base, bus,
- pci_base_hi, pci_base_lo, cpu_base, size, tbl);
- }
-
- enables &= ~(3<<(9+bus*5)); /* Enable cpu->pci<bus> i/o,
- cpu->pci<bus> mem0 */
- out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE),
- enables);
- };
-}
-
-static void c2k_fixups(void)
-{
- u32 mem_size;
-
- mem_size = mv64x60_get_mem_size(bridge_base);
- c2k_bridge_setup(mem_size); /* Do necessary bridge setup */
-}
-
-#define MV64x60_MPP_CNTL_0 0xf000
-#define MV64x60_MPP_CNTL_2 0xf008
-#define MV64x60_GPP_IO_CNTL 0xf100
-#define MV64x60_GPP_LEVEL_CNTL 0xf110
-#define MV64x60_GPP_VALUE_SET 0xf118
-
-static void c2k_reset(void)
-{
- u32 temp;
-
- udelay(5000000);
-
- if (bridge_base != 0) {
- temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
- temp &= 0xFFFF0FFF;
- out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
- temp |= 0x00000004;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
- temp |= 0x00000004;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
- temp &= 0xFFFF0FFF;
- out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
- temp |= 0x00080000;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
- temp |= 0x00080000;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
- out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
- 0x00080004);
- }
-
- for (;;);
-}
-
-static bd_t bd;
-
-void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- CUBOOT_INIT();
-
- fdt_init(_dtb_start);
-
- bridge_base = mv64x60_get_bridge_base();
-
- platform_ops.fixups = c2k_fixups;
- platform_ops.exit = c2k_reset;
-
- if (serial_console_init() < 0)
- exit();
-}
diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts
deleted file mode 100644
index c5beb72d18b7..000000000000
--- a/arch/powerpc/boot/dts/c2k.dts
+++ /dev/null
@@ -1,366 +0,0 @@
-/* Device Tree Source for GEFanuc C2K
- *
- * Author: Remi Machet <rmachet@slac.stanford.edu>
- *
- * Originated from prpmc2800.dts
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "C2K";
- compatible = "GEFanuc,C2K";
- coherency-off;
-
- aliases {
- pci0 = &PCI0;
- pci1 = &PCI1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "PowerPC,7447";
- reg = <0>;
- clock-frequency = <996000000>; /* 996 MHz */
- bus-frequency = <166666667>; /* 166.6666 MHz */
- timebase-frequency = <41666667>; /* 166.6666/4 MHz */
- i-cache-line-size = <32>;
- d-cache-line-size = <32>;
- i-cache-size = <32768>;
- d-cache-size = <32768>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>; /* 1GB */
- };
-
- system-controller@d8000000 { /* Marvell Discovery */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64460";
- compatible = "marvell,mv64360";
- clock-frequency = <166666667>; /* 166.66... MHz */
- reg = <0xd8000000 0x00010000>;
- virtual-reg = <0xd8000000>;
- ranges = <0xd4000000 0xd4000000 0x01000000 /* PCI 0 I/O Space */
- 0x80000000 0x80000000 0x08000000 /* PCI 0 MEM Space */
- 0xd0000000 0xd0000000 0x01000000 /* PCI 1 I/O Space */
- 0xa0000000 0xa0000000 0x08000000 /* PCI 1 MEM Space */
- 0xd8100000 0xd8100000 0x00010000 /* FPGA */
- 0xd8110000 0xd8110000 0x00010000 /* FPGA USARTs */
- 0xf8000000 0xf8000000 0x08000000 /* User FLASH */
- 0x00000000 0xd8000000 0x00010000 /* Bridge's regs */
- 0xd8140000 0xd8140000 0x00040000>; /* Integrated SRAM */
-
- mdio@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-mdio";
- reg = <0x2000 4>;
- PHY0: ethernet-phy@0 {
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <0>;
- };
- PHY1: ethernet-phy@1 {
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
- PHY2: ethernet-phy@2 {
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <2>;
- };
- };
-
- ethernet-group@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-group";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@1 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <1>;
- interrupts = <33>;
- interrupt-parent = <&PIC>;
- phy = <&PHY1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@2 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <2>;
- interrupts = <34>;
- interrupt-parent = <&PIC>;
- phy = <&PHY2>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- };
-
- SDMA0: sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xd8004000>;
- interrupt-base = <0>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
- SDMA1: sdma@6000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x6000 0xc18>;
- virtual-reg = <0xd8006000>;
- interrupt-base = <0>;
- interrupts = <38>;
- interrupt-parent = <&PIC>;
- };
-
- BRG0: brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <115200>;
- };
-
- BRG1: brg@b208 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb208 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <115200>;
- };
-
- CUNIT: cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
- MPSCROUTING: mpscrouting@b400 {
- reg = <0xb400 0xc>;
- };
-
- MPSCINTR: mpscintr@b800 {
- reg = <0xb800 0x100>;
- virtual-reg = <0xd800b800>;
- };
-
- MPSC0: mpsc@8000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xd8008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
- MPSC1: mpsc@9000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x9000 0x38>;
- virtual-reg = <0xd8009000>;
- sdma = <&SDMA1>;
- brg = <&BRG1>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <1>;
- interrupts = <42>;
- interrupt-parent = <&PIC>;
- };
-
- wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
- i2c@c000 {
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xd800c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
- PIC: pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0000 0x88>;
- interrupt-controller;
- };
-
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
- gpp@f100 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
- PCI0: pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0x0cf8 0x8>;
- ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-pci-iack = <0x0c34>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
- interrupt-map = <
- /* Only one interrupt line for PMC0 slot (INTA) */
- 0x0000 0 0 1 &PIC 88
- >;
- };
-
-
- PCI1: pci@a0000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0x0c78 0x8>;
- ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-pci-iack = <0x0cb4>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
- interrupt-map = <
- /* IDSEL 0x01: PMC1 ? */
- 0x0800 0 0 1 &PIC 88
- /* IDSEL 0x02: cPCI bridge */
- 0x1000 0 0 1 &PIC 88
- /* IDSEL 0x03: USB controller */
- 0x1800 0 0 1 &PIC 91
- /* IDSEL 0x04: SATA controller */
- 0x2000 0 0 1 &PIC 95
- >;
- };
-
- cpu-error@70 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x0070 0x10 0x0128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
- sram-ctrl@380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x0380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0x0c28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
- pci-error@1dc0 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1dc0 0x40 0x0ca8 0x4>;
- interrupts = <16>;
- interrupt-parent = <&PIC>;
- };
-
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
- /* Devices attached to the device controller */
- devicebus@45c {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "marvell,mv64306-devctrl";
- reg = <0x45C 0x88>;
- interrupts = <1>;
- interrupt-parent = <&PIC>;
- ranges = <0 0 0xd8100000 0x10000
- 2 0 0xd8110000 0x10000
- 4 0 0xf8000000 0x8000000>;
- fpga@0,0 {
- compatible = "sbs,fpga-c2k";
- reg = <0 0 0x10000>;
- };
- fpga_usart@2,0 {
- compatible = "sbs,fpga_usart-c2k";
- reg = <2 0 0x10000>;
- };
- nor_flash@4,0 {
- compatible = "cfi-flash";
- reg = <4 0 0x8000000>; /* 128MB */
- bank-width = <4>;
- device-width = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x00080000>;
- };
- partition@40000 {
- label = "kernel";
- reg = <0x00080000 0x00400000>;
- };
- partition@440000 {
- label = "initrd";
- reg = <0x00480000 0x00B80000>;
- };
- partition@1000000 {
- label = "rootfs";
- reg = <0x01000000 0x06800000>;
- };
- partition@7800000 {
- label = "recovery";
- reg = <0x07800000 0x00800000>;
- read-only;
- };
- };
- };
- };
- chosen {
- stdout-path = &MPSC0;
- };
-};
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
deleted file mode 100644
index 4bb832a41d55..000000000000
--- a/arch/powerpc/configs/c2k_defconfig
+++ /dev/null
@@ -1,390 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_OSF_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_SGI_PARTITION=y
-CONFIG_SUN_PARTITION=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_EMBEDDED6xx=y
-CONFIG_PPC_C2K=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_GEN_RTC=y
-CONFIG_HIGHMEM=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PCI_MSI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_SHPC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_SCTP=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_IND=y
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_ARCMSR=m
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_FUTURE_DOMAIN=m
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=m
-CONFIG_TUN=m
-# CONFIG_ATM_DRIVERS is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_VITESSE_PHY=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_NVRAM=m
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MV64XXX=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-CONFIG_USBPCWATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=m
-CONFIG_USB_MON=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_UHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_IPOIB=m
-CONFIG_INFINIBAND_IPOIB_CM=y
-CONFIG_INFINIBAND_SRP=m
-CONFIG_DMADEVICES=y
-CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=m
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUG_HIGHMEM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_PPC_EARLY_DEBUG=y
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 9fb2d5912c5a..8ea16db5ff48 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -48,16 +48,6 @@ config PPC_HOLLY
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
Board with TSI108/9 bridge (Hickory/Holly)

-config PPC_C2K
- bool "SBS/GEFanuc C2K board"
- depends on EMBEDDED6xx
- select MV64X60
- select NOT_COHERENT_CACHE
- select MTD_CFI_I4
- help
- This option enables support for the GE Fanuc C2K board (formerly
- an SBS board).
-
config MVME5100
bool "Motorola/Emerson MVME5100"
depends on EMBEDDED6xx
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 12154e3257ad..e656ae9f23c6 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
obj-$(CONFIG_STORCENTER) += storcenter.o
obj-$(CONFIG_PPC_HOLLY) += holly.o
-obj-$(CONFIG_PPC_C2K) += c2k.o
obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o
obj-$(CONFIG_GAMECUBE) += gamecube.o
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
deleted file mode 100644
index d19e4e759597..000000000000
--- a/arch/powerpc/platforms/embedded6xx/c2k.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Board setup routines for the GEFanuc C2K board
- *
- * Author: Remi Machet <rmachet@slac.stanford.edu>
- *
- * Originated from prpmc2800.c
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/seq_file.h>
-#include <linux/time.h>
-#include <linux/of.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/time.h>
-
-#include <mm/mmu_decl.h>
-
-#include <sysdev/mv64x60.h>
-
-#define MV64x60_MPP_CNTL_0 0x0000
-#define MV64x60_MPP_CNTL_2 0x0008
-
-#define MV64x60_GPP_IO_CNTL 0x0000
-#define MV64x60_GPP_LEVEL_CNTL 0x0010
-#define MV64x60_GPP_VALUE_SET 0x0018
-
-static void __iomem *mv64x60_mpp_reg_base;
-static void __iomem *mv64x60_gpp_reg_base;
-
-static void __init c2k_setup_arch(void)
-{
- struct device_node *np;
- phys_addr_t paddr;
- const unsigned int *reg;
-
- /*
- * ioremap mpp and gpp registers in case they are later
- * needed by c2k_reset_board().
- */
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
- reg = of_get_property(np, "reg", NULL);
- paddr = of_translate_address(np, reg);
- of_node_put(np);
- mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
-
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
- reg = of_get_property(np, "reg", NULL);
- paddr = of_translate_address(np, reg);
- of_node_put(np);
- mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
-
-#ifdef CONFIG_PCI
- mv64x60_pci_init();
-#endif
-}
-
-static void c2k_reset_board(void)
-{
- u32 temp;
-
- local_irq_disable();
-
- temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
- temp &= 0xFFFF0FFF;
- out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
- temp |= 0x00000004;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
- temp |= 0x00000004;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
- temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
- temp &= 0xFFFF0FFF;
- out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
- temp |= 0x00080000;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
- temp |= 0x00080000;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
-}
-
-static void __noreturn c2k_restart(char *cmd)
-{
- c2k_reset_board();
- msleep(100);
- panic("restart failed\n");
-}
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define COHERENCY_SETTING "off"
-#else
-#define COHERENCY_SETTING "on"
-#endif
-
-void c2k_show_cpuinfo(struct seq_file *m)
-{
- seq_printf(m, "Vendor\t\t: GEFanuc\n");
- seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
-}
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init c2k_probe(void)
-{
- if (!of_machine_is_compatible("GEFanuc,C2K"))
- return 0;
-
- printk(KERN_INFO "Detected a GEFanuc C2K board\n");
-
- _set_L2CR(0);
- _set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I);
-
- mv64x60_init_early();
-
- return 1;
-}
-
-define_machine(c2k) {
- .name = "C2K",
- .probe = c2k_probe,
- .setup_arch = c2k_setup_arch,
- .show_cpuinfo = c2k_show_cpuinfo,
- .init_IRQ = mv64x60_init_irq,
- .get_irq = mv64x60_get_irq,
- .restart = c2k_restart,
- .calibrate_decr = generic_calibrate_decr,
-};
--
2.16.2
\
 
 \ /
  Last update: 2018-04-06 03:19    [W:0.098 / U:4.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site