lkml.org 
[lkml]   [2018]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] net: phy: marvell: Enable interrupt function on LED2 pin
> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 0e0978d8a0eb..f03a510f1247 100644
> --- a/drivers/net/phy/marvell.c
> +++ b/drivers/net/phy/marvell.c
> @@ -457,6 +457,21 @@ static int marvell_of_reg_init(struct phy_device *phydev) } #endif /* CONFIG_OF_MDIO */
>
> +static int m88e1318_config_intr(struct phy_device *phydev) {
> + int err;
> +
> + err = marvell_config_intr(phydev);
> + if (err)
> + return err;
> +
> + /* Setup LED[2] as interrupt pin (active low) */
> + return phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
> + MII_88E1318S_PHY_LED_TCR_FORCE_INT,
> + MII_88E1318S_PHY_LED_TCR_INTn_ENABLE |
> + MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW);
>
> Can we move this part of the code to m88e1121_config_init() ?
>
> Every time whether we disable or enable the interrupts this part of code will execute.

Yes, doing this once would be better. But please allow the LED pin to
be used as an LED when not using interrupts. phy_interrupt_is_valid()
should be involved somehow.

Andrew

\
 
 \ /
  Last update: 2018-04-05 16:45    [W:0.068 / U:17.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site