lkml.org 
[lkml]   [2018]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/6] spi: sun6i: restrict transfer length in PIO-mode
From
Date
On 04/05/2018 04:17 PM, Mark Brown wrote:
> On Thu, Apr 05, 2018 at 12:59:35PM +0300, Sergey Suloev wrote:
>> On 04/05/2018 12:19 PM, Maxime Ripard wrote:
>>> The point of that patch was precisely to allow to send more data than
>>> the FIFO. You're breaking that behaviour without any justification,
>>> and this is not ok.
>> I am sorry, but you can't. That's a hardware limitation.
> Are you positive about that? Normally you can add things to hardware
> FIFOs while they're being drained so so long as you can keep data
> flowing in at least as fast as it's being consumed.

Well, normally yes, but this is not the case with the hardware that I
own. My a20 (BPiM1+) and a31 (BPiM2) boards behaves differently. With a
transfer larger than FIFO then TC interrupt never happens.

\
 
 \ /
  Last update: 2018-04-05 15:45    [W:0.084 / U:32.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site