lkml.org 
[lkml]   [2018]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/4] tracing: Add action comparisons when testing matching hist triggers
On Wed, 04 Apr 2018 10:17:03 -0500
Tom Zanussi <tom.zanussi@linux.intel.com> wrote:

> Hi Masami,
>
> On Wed, 2018-04-04 at 21:33 +0900, Masami Hiramatsu wrote:
> > Hi Tom,
> >
> > On Mon, 02 Apr 2018 12:09:33 -0500
> > Tom Zanussi <tom.zanussi@linux.intel.com> wrote:
> >
> > > after:
> > >
> > > # echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events
> > > # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
> > > # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
> > > # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
> > > # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
> > > # echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
> >
> > I ensured this sequence has no problem.
> > After above sequence, the trigger file shows
> >
> > ======
> > # cat events/sched/sched_switch/trigger
> > hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:sort=hitcount:size=2048:clock=global if next_comm=="cyclictest" [active]
> > hist:keys=next_pid:vals=hitcount:sort=hitcount:size=2048:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest" [active]
> > hist:keys=next_pid:vals=hitcount:sort=hitcount:size=2048:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest" [active]
> > hist:keys=next_pid:vals=hitcount:sort=hitcount:size=2048 if next_comm=="cyclictest" [active]
> > ======
> >
> > So I clear the last one
> >
> > ======
> > # echo '!hist:keys=next_pid if next_comm=="cyclictest"' >> events/sched/sched_switch/trigger
> > #
> > ======
> >
> > OK, it should be removed. I can not see it anymore on the trigger file.
> >
> > ======
> > # cat events/sched/sched_switch/trigger
> > hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:sort=hitcount:size=2048:clock=global if next_comm=="cyclictest" [active]
> > hist:keys=next_pid:vals=hitcount:sort=hitcount:size=2048:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest" [active]
> > hist:keys=next_pid:vals=hitcount:sort=hitcount:size=2048:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest" [active]
> > ======
> >
> > But when I missed to remove it again, it is accepted (is not an error?)
> >
> > ======
> > # echo '!hist:keys=next_pid if next_comm=="cyclictest"' >> events/sched/sched_switch/trigger
> > #
> > ======
>
> This is consistent with existing behavior, not only for the hist
> triggers but ftrace in general I think e.g.
>
> # echo 'traceoff:1 if nr_rq > 1' >> /sys/kernel/debug/tracing/events/block/block_unplug/trigger
> # echo '!traceoff:1 if nr_rq > 1' >> /sys/kernel/debug/tracing/events/block/block_unplug/trigger
> # echo '!traceoff:1 if nr_rq > 1' >> /sys/kernel/debug/tracing/events/block/block_unplug/trigger
>
> # echo 'try_to_wake_up:enable_event:sched:sched_switch:2' >> set_ftrace_filter
> # echo '!try_to_wake_up:enable_event:sched:sched_switch:2' >> set_ftrace_filter
> # echo '!try_to_wake_up:enable_event:sched:sched_switch:2' >> set_ftrace_filter
>
> Neither produces an error trying to remove an already-removed trigger.
> Or are you thinking about something else?

Hmm, OK, it is ftrace's behavior.

> > Hmm... anyway, let's clear others too.
> >
> > ======
> > # echo '!hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> events/sched/sched_switch/trigger
> > # echo '!hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> events/sched/sched_switch/trigger
> > # cat events/sched/sched_switch/trigger
> > # Available triggers:
> > # traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
> > ======
> >
> > OK, it is cleared now.
> >
> > Now I test it again.
> >
> > ======
> > # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> events/sched/sched_wakeup/trigger
> > sh: write error: Invalid argument
> > ======
> >
> > Oops, what's the error?
> >
> > ======
> > # cat events/sched/sched_switch/hist
> >
> > ERROR: Variable already defined: ts0
> > Last command: keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"
> > ======
> >
>
> Hmm, but ts0 is defined on sched_wakeup - you removed the triggers on
> sched_switch, but I didn't see where you removed the sched_wakeup
> trigger defining ts0...

Ah, I confused that the sched_switch and sched_wakeup...

Can you print out the error with which event we should see? e.g.

ERROR: Variable already defined at sched_wakeup: ts0

And this shows the good reason why we should reject removing
unexist trigger (with -ENOENT). If I find I can not remove
'hist:keys=pid:ts0=...' from sched_switch, it helps me to
notice my mistake.

> > Hmm, how can I undef ts0 and test it again?
>
> You should be able to remove the sched_wakeup trigger defining ts0 and
> after doing that test again. At least I was able to:
>
> # echo '!hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >>
> events/sched/sched_wakeup/trigger
>
> # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"'
> >> events/sched/sched_wakeup/trigger

OK, anyway this works good to me too.

Tested-by: Masami Hiramatsu <mhiramat@kernel.org>

Thanks,

--
Masami Hiramatsu <mhiramat@kernel.org>

\
 
 \ /
  Last update: 2018-04-05 05:50    [W:0.104 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site