lkml.org 
[lkml]   [2018]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/4] tracing: Add action comparisons when testing matching hist triggers
From
Date
Hi Masami,

On Wed, 2018-04-04 at 21:33 +0900, Masami Hiramatsu wrote:
> Hi Tom,
>
> On Mon, 02 Apr 2018 12:09:33 -0500
> Tom Zanussi <tom.zanussi@linux.intel.com> wrote:
>
> > after:
> >
> > # echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events
> > # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger
> > # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
> > # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
> > # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
> > # echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
>
> I ensured this sequence has no problem.
> After above sequence, the trigger file shows
>
> ======
> # cat events/sched/sched_switch/trigger
> hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:sort=hitcount:size=2048:clock=global if next_comm=="cyclictest" [active]
> hist:keys=next_pid:vals=hitcount:sort=hitcount:size=2048:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest" [active]
> hist:keys=next_pid:vals=hitcount:sort=hitcount:size=2048:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest" [active]
> hist:keys=next_pid:vals=hitcount:sort=hitcount:size=2048 if next_comm=="cyclictest" [active]
> ======
>
> So I clear the last one
>
> ======
> # echo '!hist:keys=next_pid if next_comm=="cyclictest"' >> events/sched/sched_switch/trigger
> #
> ======
>
> OK, it should be removed. I can not see it anymore on the trigger file.
>
> ======
> # cat events/sched/sched_switch/trigger
> hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:sort=hitcount:size=2048:clock=global if next_comm=="cyclictest" [active]
> hist:keys=next_pid:vals=hitcount:sort=hitcount:size=2048:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest" [active]
> hist:keys=next_pid:vals=hitcount:sort=hitcount:size=2048:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest" [active]
> ======
>
> But when I missed to remove it again, it is accepted (is not an error?)
>
> ======
> # echo '!hist:keys=next_pid if next_comm=="cyclictest"' >> events/sched/sched_switch/trigger
> #
> ======

This is consistent with existing behavior, not only for the hist
triggers but ftrace in general I think e.g.

# echo 'traceoff:1 if nr_rq > 1' >> /sys/kernel/debug/tracing/events/block/block_unplug/trigger
# echo '!traceoff:1 if nr_rq > 1' >> /sys/kernel/debug/tracing/events/block/block_unplug/trigger
# echo '!traceoff:1 if nr_rq > 1' >> /sys/kernel/debug/tracing/events/block/block_unplug/trigger

# echo 'try_to_wake_up:enable_event:sched:sched_switch:2' >> set_ftrace_filter
# echo '!try_to_wake_up:enable_event:sched:sched_switch:2' >> set_ftrace_filter
# echo '!try_to_wake_up:enable_event:sched:sched_switch:2' >> set_ftrace_filter

Neither produces an error trying to remove an already-removed trigger.
Or are you thinking about something else?

>
> Hmm... anyway, let's clear others too.
>
> ======
> # echo '!hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> events/sched/sched_switch/trigger
> # echo '!hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> events/sched/sched_switch/trigger
> # cat events/sched/sched_switch/trigger
> # Available triggers:
> # traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
> ======
>
> OK, it is cleared now.
>
> Now I test it again.
>
> ======
> # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> events/sched/sched_wakeup/trigger
> sh: write error: Invalid argument
> ======
>
> Oops, what's the error?
>
> ======
> # cat events/sched/sched_switch/hist
>
> ERROR: Variable already defined: ts0
> Last command: keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"
> ======
>

Hmm, but ts0 is defined on sched_wakeup - you removed the triggers on
sched_switch, but I didn't see where you removed the sched_wakeup
trigger defining ts0...

> Hmm, how can I undef ts0 and test it again?

You should be able to remove the sched_wakeup trigger defining ts0 and
after doing that test again. At least I was able to:

# echo '!hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >>
events/sched/sched_wakeup/trigger

# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"'
>> events/sched/sched_wakeup/trigger

Thanks,

Tom



> If I can not clean it, the testcase must fail on the 2nd time.
>
> Thank you,
>


\
 
 \ /
  Last update: 2018-04-04 17:17    [W:0.198 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site