lkml.org 
[lkml]   [2018]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 5/6] i2c: i2c-stm32f7: Add DMA support
From
Date


On 04/03/2018 05:39 PM, Wolfram Sang wrote:
>
>> +#define STM32F7_I2C_DMA_LEN_MIN 0x1
> ...
>
>> + if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) {
>
> Are you using DMA for every message with a length >= 1? The setup of
> that might be more expensive than the DMA gain, if so.
>
Well yes. I am in charge of DMA IPs as well. I2C is the only devices that I had
to test DMA outside standard DMA Engine test. Quite convenient.
I believe to stress both I2C and DMA, this value was relevant.
Now I agree this value can be tuned a little bit. I might raise this threshold
in V3.

\
 
 \ /
  Last update: 2018-04-04 10:22    [W:0.050 / U:1.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site