lkml.org 
[lkml]   [2018]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 09/14] s390: vfio-ap: sysfs interfaces to configure domains
From
Date
On 04/03/2018 11:19 AM, Cornelia Huck wrote:
> On Tue, 3 Apr 2018 11:12:45 -0400
> Tony Krowiak <akrowiak@linux.vnet.ibm.com> wrote:
>
>> On 04/03/2018 07:17 AM, Cornelia Huck wrote:
>>> On Wed, 14 Mar 2018 14:25:49 -0400
>>> Tony Krowiak <akrowiak@linux.vnet.ibm.com> wrote:
>>>
>>>> Provides the sysfs interfaces for assigning AP domains to
>>>> and unassigning AP domains from a mediated matrix device.
>>>>
>>>> An AP domain ID corresponds to an AP queue index (APQI). For
>>>> each domain assigned to the mediated matrix device, its
>>>> corresponging APQI is stored in an AP queue mask (AQM).
>>>> The bits in the AQM, from most significant to least
>>>> significant bit, correspond to AP domain numbers 0 to 255.
>>>> When a domain is assigned, the bit corresponding to its
>>>> APQI will be set in the AQM. Likewise, when a domain is
>>>> unassigned, the bit corresponding to its APQI will be
>>>> cleared from the AQM.
>>>>
>>>> The relevant sysfs structures are:
>>>>
>>>> /sys/devices/vfio_ap
>>>> ... [matrix]
>>>> ...... [mdev_supported_types]
>>>> ......... [vfio_ap-passthrough]
>>>> ............ [devices]
>>>> ...............[$uuid]
>>>> .................. assign_domain
>>>> .................. unassign_domain
>>>>
>>>> To assign a domain to the $uuid mediated matrix device,
>>>> write the domain's ID to the assign_domain file. To
>>>> unassign a domain, write the domain's ID to the
>>>> unassign_domain file. The ID is specified using
>>>> conventional semantics: If it begins with 0x, the number
>>>> will be parsed as a hexadecimal (case insensitive) number;
>>>> otherwise, it will be parsed as a decimal number.
>>>>
>>>> For example, to assign domain 173 (0xad) to the mediated matrix
>>>> device $uuid:
>>>>
>>>> echo 173 > assign_domain
>>>>
>>>> or
>>>>
>>>> echo 0xad > assign_domain
>>>>
>>>> To unassign domain 173 (0xad):
>>>>
>>>> echo 173 > unassign_domain
>>>>
>>>> or
>>>>
>>>> echo 0xad > unassign_domain
>>>>
>>>> The assignment will be rejected:
>>>>
>>>> * If the domain ID exceeds the maximum value for an AP domain:
>>>>
>>>> * If the AP Extended Addressing (APXA) facility is installed,
>>>> the max value is 255
>>>>
>>>> * Else the max value is 15
>>>>
>>>> * If no AP adapters have yet been assigned and there are
>>>> no AP queues reserved by the VFIO AP driver that have an APQN
>>>> with an APQI matching that of the AP domain number being
>>>> assigned.
>>>>
>>>> * If any of the APQNs that can be derived from the intersection
>>>> of the APQI being assigned and the AP adapter ID (APID) of
>>>> each of the AP adapters previously assigned can not be matched
>>>> with an APQN of an AP queue device reserved by the VFIO AP
>>>> driver.
>>>>
>>>> Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
>>>> ---
>>>> arch/s390/include/asm/kvm-ap.h | 1 +
>>>> drivers/s390/crypto/vfio_ap_ops.c | 215 ++++++++++++++++++++++++++++++++++++-
>>>> 2 files changed, 215 insertions(+), 1 deletions(-)
>>>>
>>>> diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
>>>> index 90512a6..c448835 100644
>>>> --- a/drivers/s390/crypto/vfio_ap_ops.c
>>>> +++ b/drivers/s390/crypto/vfio_ap_ops.c
>>>> @@ -377,10 +377,223 @@ static ssize_t unassign_adapter_store(struct device *dev,
>>>> }
>>>> DEVICE_ATTR_WO(unassign_adapter);
>>>>
>>>> +/**
>>>> + * vfio_ap_validate_queues_for_apqi
>>>> + *
>>>> + * @ap_matrix: the matrix device
>>>> + * @matrix_mdev: the mediated matrix device
>>>> + * @apqi: an AP queue index (APQI) - corresponds to a domain ID
>>>> + *
>>>> + * Verifies that each APQN that is derived from the intersection of @apqi and
>>>> + * each AP adapter ID (APID) corresponding to an AP domain assigned to the
>>>> + * @matrix_mdev matches the APQN of an AP queue reserved by the VFIO AP device
>>>> + * driver.
>>>> + *
>>>> + * Returns 0 if validation succeeds; otherwise, returns an error.
>>>> + */
>>>> +static int vfio_ap_validate_queues_for_apqi(struct ap_matrix *ap_matrix,
>>>> + struct ap_matrix_mdev *matrix_mdev,
>>>> + unsigned long apqi)
>>>> +{
>>>> + int ret;
>>>> + struct vfio_ap_qid_match qid_match;
>>>> + unsigned long apid;
>>>> + struct device_driver *drv = ap_matrix->device.driver;
>>>> +
>>>> + /**
>>>> + * Examine each APQN with the specified APQI
>>>> + */
>>>> + for_each_set_bit_inv(apid, matrix_mdev->matrix->apm,
>>>> + matrix_mdev->matrix->apm_max) {
>>>> + qid_match.qid = AP_MKQID(apid, apqi);
>>>> + qid_match.dev = NULL;
>>>> +
>>>> + ret = driver_for_each_device(drv, NULL, &qid_match,
>>>> + vfio_ap_queue_match);
>>>> + if (ret)
>>>> + return ret;
>>> Hm, I'm wondering whether jumping out of the outer loop is the correct
>>> thing to do here - and if yes, whether we should log an error?
>> If you look at the vfio_ap_queue_match() function which is passed to the
>> driver_for_each_device() function, it never returns an error. The
>> driver_for_each_device() function only returns an error if the function
>> passed in returns an error, so in reality, the value of *ret *will never
>> be anything but 0. Having said that, there are no guarantees that the
>> vfio_ap_queue_match() function will never change, so it would probably
>> be a good idea to log an error if *ret *is not 0.**I think returning at
>> this point is valid because a non-zero is returned from
>> driver_for_each_device() function as soon as the input function returns
>> a non-zero value for a specific device. This means that subsequent
>> devices will not be processed, so we may not know whether an AP queue
>> has been reserved or not - see check below.
> OK, then logging an error makes the most sense.
>
> Is there a source tree with the patches somewhere, btw? Checking out a
> branch is less time-consuming than applying a series (and helps
> review). Same applies to the qemu patches; maybe one of the IBM
> maintainers can push to a branch?
I'll check with Christian for the forthcoming v4 patches.
>
>>>
>>>> +
>>>> + /*
>>>> + * If the APQN identifies an AP queue that is reserved by the
>>>> + * VFIO AP device driver, continue processing.
>>>> + */
>>>> + if (qid_match.dev)
>>>> + continue;
>>>> +
>>>> + pr_err("%s: AP queue %02lx.%04lx not reserved by %s driver",
>>>> + VFIO_AP_MATRIX_MODULE_NAME, apqi, apqi,
>>>> + VFIO_AP_DRV_NAME);
>>>> +
>>>> + return -ENXIO;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>

\
 
 \ /
  Last update: 2018-04-03 17:43    [W:0.091 / U:35.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site