lkml.org 
[lkml]   [2018]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 09/14] s390: vfio-ap: sysfs interfaces to configure domains
On Tue, 3 Apr 2018 11:12:45 -0400
Tony Krowiak <akrowiak@linux.vnet.ibm.com> wrote:

> On 04/03/2018 07:17 AM, Cornelia Huck wrote:
> > On Wed, 14 Mar 2018 14:25:49 -0400
> > Tony Krowiak <akrowiak@linux.vnet.ibm.com> wrote:
> >
> >> Provides the sysfs interfaces for assigning AP domains to
> >> and unassigning AP domains from a mediated matrix device.
> >>
> >> An AP domain ID corresponds to an AP queue index (APQI). For
> >> each domain assigned to the mediated matrix device, its
> >> corresponging APQI is stored in an AP queue mask (AQM).
> >> The bits in the AQM, from most significant to least
> >> significant bit, correspond to AP domain numbers 0 to 255.
> >> When a domain is assigned, the bit corresponding to its
> >> APQI will be set in the AQM. Likewise, when a domain is
> >> unassigned, the bit corresponding to its APQI will be
> >> cleared from the AQM.
> >>
> >> The relevant sysfs structures are:
> >>
> >> /sys/devices/vfio_ap
> >> ... [matrix]
> >> ...... [mdev_supported_types]
> >> ......... [vfio_ap-passthrough]
> >> ............ [devices]
> >> ...............[$uuid]
> >> .................. assign_domain
> >> .................. unassign_domain
> >>
> >> To assign a domain to the $uuid mediated matrix device,
> >> write the domain's ID to the assign_domain file. To
> >> unassign a domain, write the domain's ID to the
> >> unassign_domain file. The ID is specified using
> >> conventional semantics: If it begins with 0x, the number
> >> will be parsed as a hexadecimal (case insensitive) number;
> >> otherwise, it will be parsed as a decimal number.
> >>
> >> For example, to assign domain 173 (0xad) to the mediated matrix
> >> device $uuid:
> >>
> >> echo 173 > assign_domain
> >>
> >> or
> >>
> >> echo 0xad > assign_domain
> >>
> >> To unassign domain 173 (0xad):
> >>
> >> echo 173 > unassign_domain
> >>
> >> or
> >>
> >> echo 0xad > unassign_domain
> >>
> >> The assignment will be rejected:
> >>
> >> * If the domain ID exceeds the maximum value for an AP domain:
> >>
> >> * If the AP Extended Addressing (APXA) facility is installed,
> >> the max value is 255
> >>
> >> * Else the max value is 15
> >>
> >> * If no AP adapters have yet been assigned and there are
> >> no AP queues reserved by the VFIO AP driver that have an APQN
> >> with an APQI matching that of the AP domain number being
> >> assigned.
> >>
> >> * If any of the APQNs that can be derived from the intersection
> >> of the APQI being assigned and the AP adapter ID (APID) of
> >> each of the AP adapters previously assigned can not be matched
> >> with an APQN of an AP queue device reserved by the VFIO AP
> >> driver.
> >>
> >> Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
> >> ---
> >> arch/s390/include/asm/kvm-ap.h | 1 +
> >> drivers/s390/crypto/vfio_ap_ops.c | 215 ++++++++++++++++++++++++++++++++++++-
> >> 2 files changed, 215 insertions(+), 1 deletions(-)
> >>
> >> diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
> >> index 90512a6..c448835 100644
> >> --- a/drivers/s390/crypto/vfio_ap_ops.c
> >> +++ b/drivers/s390/crypto/vfio_ap_ops.c
> >> @@ -377,10 +377,223 @@ static ssize_t unassign_adapter_store(struct device *dev,
> >> }
> >> DEVICE_ATTR_WO(unassign_adapter);
> >>
> >> +/**
> >> + * vfio_ap_validate_queues_for_apqi
> >> + *
> >> + * @ap_matrix: the matrix device
> >> + * @matrix_mdev: the mediated matrix device
> >> + * @apqi: an AP queue index (APQI) - corresponds to a domain ID
> >> + *
> >> + * Verifies that each APQN that is derived from the intersection of @apqi and
> >> + * each AP adapter ID (APID) corresponding to an AP domain assigned to the
> >> + * @matrix_mdev matches the APQN of an AP queue reserved by the VFIO AP device
> >> + * driver.
> >> + *
> >> + * Returns 0 if validation succeeds; otherwise, returns an error.
> >> + */
> >> +static int vfio_ap_validate_queues_for_apqi(struct ap_matrix *ap_matrix,
> >> + struct ap_matrix_mdev *matrix_mdev,
> >> + unsigned long apqi)
> >> +{
> >> + int ret;
> >> + struct vfio_ap_qid_match qid_match;
> >> + unsigned long apid;
> >> + struct device_driver *drv = ap_matrix->device.driver;
> >> +
> >> + /**
> >> + * Examine each APQN with the specified APQI
> >> + */
> >> + for_each_set_bit_inv(apid, matrix_mdev->matrix->apm,
> >> + matrix_mdev->matrix->apm_max) {
> >> + qid_match.qid = AP_MKQID(apid, apqi);
> >> + qid_match.dev = NULL;
> >> +
> >> + ret = driver_for_each_device(drv, NULL, &qid_match,
> >> + vfio_ap_queue_match);
> >> + if (ret)
> >> + return ret;
> > Hm, I'm wondering whether jumping out of the outer loop is the correct
> > thing to do here - and if yes, whether we should log an error?
> If you look at the vfio_ap_queue_match() function which is passed to the
> driver_for_each_device() function, it never returns an error. The
> driver_for_each_device() function only returns an error if the function
> passed in returns an error, so in reality, the value of *ret *will never
> be anything but 0. Having said that, there are no guarantees that the
> vfio_ap_queue_match() function will never change, so it would probably
> be a good idea to log an error if *ret *is not 0.**I think returning at
> this point is valid because a non-zero is returned from
> driver_for_each_device() function as soon as the input function returns
> a non-zero value for a specific device. This means that subsequent
> devices will not be processed, so we may not know whether an AP queue
> has been reserved or not - see check below.

OK, then logging an error makes the most sense.

Is there a source tree with the patches somewhere, btw? Checking out a
branch is less time-consuming than applying a series (and helps
review). Same applies to the qemu patches; maybe one of the IBM
maintainers can push to a branch?

>
> >
> >> +
> >> + /*
> >> + * If the APQN identifies an AP queue that is reserved by the
> >> + * VFIO AP device driver, continue processing.
> >> + */
> >> + if (qid_match.dev)
> >> + continue;
> >> +
> >> + pr_err("%s: AP queue %02lx.%04lx not reserved by %s driver",
> >> + VFIO_AP_MATRIX_MODULE_NAME, apqi, apqi,
> >> + VFIO_AP_DRV_NAME);
> >> +
> >> + return -ENXIO;
> >> + }
> >> +
> >> + return 0;
> >> +}
>
>

\
 
 \ /
  Last update: 2018-04-03 17:20    [W:0.054 / U:1.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site