lkml.org 
[lkml]   [2018]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH v6 2/5] dt-bindings: pwm-backlight: add PWM delay proprieties.
On Wed, 28 Mar 2018, Enric Balletbo i Serra wrote:

> Hardware needs a delay between setting an initial (non-zero) PWM and
> enabling the backlight using GPIO. The post-pwm-on-delay-ms specifies
> this delay in milli seconds. Hardware also needs a delay between disabing
> the backlight using GPIO and setting PWM value to 0. The pwm-off-delay-ms
> is this delay in milli seconds.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Acked-by: Pavel Machek <pavel@ucw.cz>
> Acked-by: Thierry Reding <thierry.reding@gmail.com>
> Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> Based on the original Huang Lin <hl@rock-chips.com> work.
> Changes since v5:
> - Add Acked-by: Thierry Reding <thierry.reding@gmail.com>
> - CC DT mainling list (for some reason dropped at some point, my
> fault)
> Changes since v4:
> - Rebase on top of mainline.
> Changes since v3:
> - Replace us for ms.
> - Add Acked-by: Pavel Machek <pavel@ucw.cz>
> Changes since v2:
> - Use separate properties (Rob Herring)
> Changes since v1:
> - As suggested by Daniel Thompson
> - Do not assume power-on delay and power-off delay will be the same
> ---
> Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt | 6 ++++++
> 1 file changed, 6 insertions(+)

Applied, thanks.

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2018-04-03 11:20    [W:0.092 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site