lkml.org 
[lkml]   [2018]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] dmaengine: axi-dmac: Request IRQ with IRQF_SHARED
From
Date
On 04/27/2018 05:15 PM, Moritz Fischer wrote:
> Hi Vinod,
>
> On Fri, Apr 27, 2018 at 12:08 AM, Vinod Koul <vinod.koul@intel.com> wrote:
>> On Fri, Apr 27, 2018 at 08:53:39AM +0200, Lars-Peter Clausen wrote:
>>> On 04/27/2018 07:11 AM, Vinod Koul wrote:
>>>> On Thu, Apr 26, 2018 at 10:40:00AM -0700, Moritz Fischer wrote:
>>>>> Request IRQ with IRQF_SHARED flag. This works since the interrupt
>>>>> handler already checks if there is an actual IRQ pending and returns
>>>>> IRQ_NONE otherwise.
>>>>
>>>> hmmm what are we trying to fix here? Is your device on a shared line or not?
>>>
>>> IRQF_SHARED does not mean that the IRQ is on a shared line. It means that
>>> the driver can handle it if the IRQ is on a shared line. Since the driver
>>> can handle it setting the flag is a good idea since this enables usecases
>>> where the line is shared.
>>
>> Yes that is correct indeed, but what is the motivation for the change.
>>
>> If you never expect this to be in shared environment why to do this?
>> Sorry but "it works" is not a good enough reason for this change, to enable
>> usecases where the line is shared is a good reason :)
>
> Remember, this is an FPGA soft core. I happen to have a design [1] where it
> is hooked up with multiple of them on one IRQ line, so to make this work,
> I need this change.

I think what Vinod is asking for is a change to the commit message saying
that "this change enables the driver to be used with devices where the
interrupt line is shared".

\
 
 \ /
  Last update: 2018-04-27 17:21    [W:0.064 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site