lkml.org 
[lkml]   [2018]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 04/24] ASoC: qdsp6: dt-bindings: Add q6afe dt bindings
On Thu, Apr 26, 2018 at 10:45:46AM +0100, srinivas.kandagatla@linaro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>
> This patch add DT bindings for AFE (Audio Frontend) DSP module.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
> ---
> .../devicetree/bindings/sound/qcom,q6afe.txt | 88 ++++++++++++++++++++++
> include/dt-bindings/sound/qcom,q6afe.h | 31 ++++++++
> 2 files changed, 119 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6afe.txt
> create mode 100644 include/dt-bindings/sound/qcom,q6afe.h
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
> new file mode 100644
> index 000000000000..05208a63dd3c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
> @@ -0,0 +1,88 @@
> +Qualcomm Audio Front End (Q6AFE) binding
> +
> +AFE is one of the APR audio service on Q6DSP
> +Please refer to qcom,apr.txt for details of the common apr service bindings
> +used by all apr services.
> +
> +- but must contain the following property:
> +
> +- compatible:
> + Usage: required
> + Value type: <stringlist>
> + Definition: must be "qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>"
> + Or "qcom,q6afe" where the version number can be queried
> + from DSP.
> + example "qcom,q6afe"

reg too.

> +
> += AFE DAIs (Digial Audio Interface)
> +"dais" subnode of the AFE node represents dai specific configuration
> +
> +- #sound-dai-cells
> + Usage: required
> + Value type: <u32>
> + Definition: Must be 1
> +
> +- reg

It's not clear here these are in a grandchild node.

> + Usage: required
> + Value type: <u32>
> + Definition: Must be dai id
> +
> +- qcom,sd-lines
> + Usage: required for mi2s interface
> + Value type: <prop-encoded-array>
> + Definition: Must be list of serial data lines used by this dai.
> + should be one or more of the 1-4 sd lines.

\
 
 \ /
  Last update: 2018-04-27 16:14    [W:0.183 / U:2.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site