lkml.org 
[lkml]   [2018]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v8 00/13] Support PPTT for ARM64
On 26 April 2018 at 01:31, Jeremy Linton <jeremy.linton@arm.com> wrote:
> ACPI 6.2 adds the Processor Properties Topology Table (PPTT), which is
> used to describe the processor and cache topology. Ideally it is
> used to extend/override information provided by the hardware, but
> right now ARM64 is entirely dependent on firmware provided tables.
>
> This patch parses the table for the cache topology and CPU topology.
> When we enable ACPI/PPTT for arm64 we map the package_id to the
> PPTT node flagged as the physical package by the firmware.
> This results in topologies that match what the remainder of the
> system expects. Finally, we update the scheduler MC domain so that
> it generally reflects the LLC unless the LLC is too large for the
> NUMA domain (or package).
>

Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # SynQuacer

Machine (7974MB)
Package L#0 + L3 L#0 (4096KB)
L2 L#0 (256KB)
L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
L2 L#1 (256KB)
L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)
L2 L#2 (256KB)
L1d L#4 (32KB) + L1i L#4 (32KB) + Core L#4 + PU L#4 (P#4)
L1d L#5 (32KB) + L1i L#5 (32KB) + Core L#5 + PU L#5 (P#5)
L2 L#3 (256KB)
L1d L#6 (32KB) + L1i L#6 (32KB) + Core L#6 + PU L#6 (P#6)
L1d L#7 (32KB) + L1i L#7 (32KB) + Core L#7 + PU L#7 (P#7)
L2 L#4 (256KB)
L1d L#8 (32KB) + L1i L#8 (32KB) + Core L#8 + PU L#8 (P#8)
L1d L#9 (32KB) + L1i L#9 (32KB) + Core L#9 + PU L#9 (P#9)
L2 L#5 (256KB)
L1d L#10 (32KB) + L1i L#10 (32KB) + Core L#10 + PU L#10 (P#10)
L1d L#11 (32KB) + L1i L#11 (32KB) + Core L#11 + PU L#11 (P#11)
L2 L#6 (256KB)
L1d L#12 (32KB) + L1i L#12 (32KB) + Core L#12 + PU L#12 (P#12)
L1d L#13 (32KB) + L1i L#13 (32KB) + Core L#13 + PU L#13 (P#13)
L2 L#7 (256KB)
L1d L#14 (32KB) + L1i L#14 (32KB) + Core L#14 + PU L#14 (P#14)
L1d L#15 (32KB) + L1i L#15 (32KB) + Core L#15 + PU L#15 (P#15)
L2 L#8 (256KB)
L1d L#16 (32KB) + L1i L#16 (32KB) + Core L#16 + PU L#16 (P#16)
L1d L#17 (32KB) + L1i L#17 (32KB) + Core L#17 + PU L#17 (P#17)
L2 L#9 (256KB)
L1d L#18 (32KB) + L1i L#18 (32KB) + Core L#18 + PU L#18 (P#18)
L1d L#19 (32KB) + L1i L#19 (32KB) + Core L#19 + PU L#19 (P#19)
L2 L#10 (256KB)
L1d L#20 (32KB) + L1i L#20 (32KB) + Core L#20 + PU L#20 (P#20)
L1d L#21 (32KB) + L1i L#21 (32KB) + Core L#21 + PU L#21 (P#21)
L2 L#11 (256KB)
L1d L#22 (32KB) + L1i L#22 (32KB) + Core L#22 + PU L#22 (P#22)
L1d L#23 (32KB) + L1i L#23 (32KB) + Core L#23 + PU L#23 (P#23)
HostBridge L#0
PCIBridge
PCIBridge
PCI 1b21:0612
Block(Removable Media Device) L#0 "sr0"
Block(Disk) L#1 "sda"
PCIBridge
PCI 168c:0032
Net L#2 "wlp3s0"
HostBridge L#4
PCI 10de:128b
GPU L#3 "renderD128"
GPU L#4 "card0"
GPU L#5 "controlD64"


> For example on juno:
> [root@mammon-juno-rh topology]# lstopo-no-graphics
> Package L#0
> L2 L#0 (1024KB)
> L1d L#0 (32KB) + L1i L#0 (32KB) + Core L#0 + PU L#0 (P#0)
> L1d L#1 (32KB) + L1i L#1 (32KB) + Core L#1 + PU L#1 (P#1)
> L1d L#2 (32KB) + L1i L#2 (32KB) + Core L#2 + PU L#2 (P#2)
> L1d L#3 (32KB) + L1i L#3 (32KB) + Core L#3 + PU L#3 (P#3)
> L2 L#1 (2048KB)
> L1d L#4 (32KB) + L1i L#4 (48KB) + Core L#4 + PU L#4 (P#4)
> L1d L#5 (32KB) + L1i L#5 (48KB) + Core L#5 + PU L#5 (P#5)
> HostBridge L#0
> PCIBridge
> PCIBridge
> PCIBridge
> PCI 1095:3132
> Block(Disk) L#0 "sda"
> PCIBridge
> PCI 1002:68f9
> GPU L#1 "renderD128"
> GPU L#2 "card0"
> GPU L#3 "controlD64"
> PCIBridge
> PCI 11ab:4380
> Net L#4 "enp8s0"
>
> Git tree at:
> http://linux-arm.org/git?p=linux-jlinton.git
> branch: pptt_v8
>
> v7->v8:
> Modify the logic used to select the MC domain (the change
> shouldn't modify the sched domains on any existing machines
> compared to v7, only how they are built)
> Reduce the severity of some parsing messages.
> Fix s390 link problem.
> Further checks to deal with broken PPTT tables.
> Various style tweaks, SPDX license addition, etc.
>
> v6->v7:
> Add additional patch to use the last cache level within the NUMA
> or socket as the MC domain. This assures the MC domain is
> equal or smaller than the DIE.
>
> Various formatting/etc review comments.
>
> Rebase to 4.16rc2
>
> v5->v6:
> Add additional patches which re-factor how the initial DT code sets
> up the cacheinfo structure so that its not as dependent on the
> of_node stored in that tree. Once that is done we rename it
> for use with the ACPI code.
>
> Additionally there were a fair number of minor name/location/etc
> tweaks scattered about made in response to review comments.
>
> v4->v5:
> Update the cache type from NOCACHE to UNIFIED when all the cache
> attributes we update are valid. This fixes a problem where caches
> which are entirely created by the PPTT don't show up in lstopo.
>
> Give the PPTT its own firmware_node in the cache structure instead of
> sharing it with the of_node.
>
> Move some pieces around between patches.
>
> (see previous cover letters for futher changes)
>
> Jeremy Linton (13):
> drivers: base: cacheinfo: move cache_setup_of_node()
> drivers: base: cacheinfo: setup DT cache properties early
> cacheinfo: rename of_node to fw_token
> arm64/acpi: Create arch specific cpu to acpi id helper
> ACPI/PPTT: Add Processor Properties Topology Table parsing
> ACPI: Enable PPTT support on ARM64
> drivers: base cacheinfo: Add support for ACPI based firmware tables
> arm64: Add support for ACPI based firmware tables
> ACPI/PPTT: Add topology parsing code
> arm64: topology: rename cluster_id
> arm64: topology: enable ACPI/PPTT based CPU topology
> ACPI: Add PPTT to injectable table list
> arm64: topology: divorce MC scheduling domain from core_siblings
>
> arch/arm64/Kconfig | 1 +
> arch/arm64/include/asm/acpi.h | 4 +
> arch/arm64/include/asm/topology.h | 6 +-
> arch/arm64/kernel/cacheinfo.c | 15 +-
> arch/arm64/kernel/topology.c | 103 +++++-
> arch/riscv/kernel/cacheinfo.c | 1 -
> drivers/acpi/Kconfig | 3 +
> drivers/acpi/Makefile | 1 +
> drivers/acpi/pptt.c | 678 ++++++++++++++++++++++++++++++++++++++
> drivers/acpi/tables.c | 2 +-
> drivers/base/cacheinfo.c | 157 ++++-----
> include/linux/acpi.h | 4 +
> include/linux/cacheinfo.h | 18 +-
> 13 files changed, 886 insertions(+), 107 deletions(-)
> create mode 100644 drivers/acpi/pptt.c
>
> --
> 2.13.6
>

\
 
 \ /
  Last update: 2018-04-26 09:58    [W:0.235 / U:3.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site