lkml.org 
[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] can: dev: increase bus-off message severity
From
Date
On 04/18/2018 04:10 PM, Jakob Unterwurzacher wrote:
> bus-off is usually caused by hardware malfunction or
> configuration error (baud rate mismatch) and causes a
> complete loss of communication.
>
> Increase the "bus-off" message's severity from netdev_dbg
> to netdev_info to make it visible to the user.
>
> A can interface going into bus-off is similar in severity to
> ethernet's "Link is Down" message, which is also printed
> at info level.
>
> It is debatable whether the the "restarted" message should
> also be changed to netdev_info to make the interface state
> changes comprehensible from the kernel log.
> I have chosen to keep the "restarted" message at dbg for now
> as the "bus-off" message should be enough for the user to
> notice and investigate the problem.
>
> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
> Cc: linux-can@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org

Applied to can.

Tnx,
Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-04-25 16:42    [W:0.092 / U:1.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site