lkml.org 
[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 04/15] ARM: dts: dra74x-mmc-iodelay: Add a new pinctrl group for clk line without pullup
* Kishon Vijay Abraham I <kishon@ti.com> [180425 12:57]:
> --- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
> +++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
> @@ -49,6 +49,17 @@
> >;
> };
>
> + mmc1_pins_default_no_clk_pu: mmc1_pins_default_no_clk_pu {
> + pinctrl-single,pins = <
> + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
> + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
> + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
> + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
> + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
> + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
> + >;
> + };
> +
> mmc1_pins_sdr12: mmc1_pins_sdr12 {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
> --

If this data is the same for all of them, why don't you add something
like dra7-iodelay.dtsi that can be included as needed?

Regards,

Tony

\
 
 \ /
  Last update: 2018-04-25 15:36    [W:0.101 / U:31.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site