[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/2] media: i2c: mt9t112: Add OF tree support

this small series add device tree support for the MT9T112 image

As in the device tree bindings I used 'semi-standard' name for the
'powerdown' GPIO, I have changed that for all other users of the mt9t112
driver (SH Ecovec only).

A note on clock: as the mt9t112 driver expects to receive the PPL parameter
configuration from platform data (I know...), new OF users are only supported
with an external clock frequency of 24MHz.


Jacopo Mondi (2):
dt-bindings: media: i2c: Add mt9t111 image sensor
media: i2c: mt9t112: Add device tree support

Documentation/devicetree/bindings/mt9t112.txt | 41 +++++++++++++
arch/sh/boards/mach-ecovec24/setup.c | 4 +-
drivers/media/i2c/mt9t112.c | 87 +++++++++++++++++++++++----
3 files changed, 118 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mt9t112.txt


 \ /
  Last update: 2018-04-25 13:01    [W:0.066 / U:8.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site