lkml.org 
[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3] cpufreq: powernv: Fix the hardlockup by synchronus smp_call in timer interrupt
Date
gpstate_timer_handler() uses synchronous smp_call to set the pstate
on the requested core. This causes the below hard lockup:

[c000003fe566b320] [c0000000001d5340] smp_call_function_single+0x110/0x180 (unreliable)
[c000003fe566b390] [c0000000001d55e0] smp_call_function_any+0x180/0x250
[c000003fe566b3f0] [c000000000acd3e8] gpstate_timer_handler+0x1e8/0x580
[c000003fe566b4a0] [c0000000001b46b0] call_timer_fn+0x50/0x1c0
[c000003fe566b520] [c0000000001b4958] expire_timers+0x138/0x1f0
[c000003fe566b590] [c0000000001b4bf8] run_timer_softirq+0x1e8/0x270
[c000003fe566b630] [c000000000d0d6c8] __do_softirq+0x158/0x3e4
[c000003fe566b710] [c000000000114be8] irq_exit+0xe8/0x120
[c000003fe566b730] [c000000000024d0c] timer_interrupt+0x9c/0xe0
[c000003fe566b760] [c000000000009014] decrementer_common+0x114/0x120
-- interrupt: 901 at doorbell_global_ipi+0x34/0x50
LR = arch_send_call_function_ipi_mask+0x120/0x130
[c000003fe566ba50] [c00000000004876c]
arch_send_call_function_ipi_mask+0x4c/0x130
[c000003fe566ba90] [c0000000001d59f0] smp_call_function_many+0x340/0x450
[c000003fe566bb00] [c000000000075f18] pmdp_invalidate+0x98/0xe0
[c000003fe566bb30] [c0000000003a1120] change_huge_pmd+0xe0/0x270
[c000003fe566bba0] [c000000000349278] change_protection_range+0xb88/0xe40
[c000003fe566bcf0] [c0000000003496c0] mprotect_fixup+0x140/0x340
[c000003fe566bdb0] [c000000000349a74] SyS_mprotect+0x1b4/0x350
[c000003fe566be30] [c00000000000b184] system_call+0x58/0x6c

One way to avoid this is removing the smp-call. We can ensure that the timer
always runs on one of the policy-cpus. If the timer gets migrated to a
cpu outside the policy then re-queue it back on the policy->cpus. This way
we can get rid of the smp-call which was being used to set the pstate
on the policy->cpus.

Fixes: 7bc54b652f13 (timers, cpufreq/powernv: Initialize the gpstate timer as pinned)
Cc: <stable@vger.kernel.org> [4.8+]
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
---
Changes from V2:
- Remove the check for active policy while requeing the migrated timer
Changes from V1:
- Remove smp_call in the pstate handler.

drivers/cpufreq/powernv-cpufreq.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
index 71f8682..e368e1f 100644
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -679,6 +679,16 @@ void gpstate_timer_handler(struct timer_list *t)

if (!spin_trylock(&gpstates->gpstate_lock))
return;
+ /*
+ * If the timer has migrated to the different cpu then bring
+ * it back to one of the policy->cpus
+ */
+ if (!cpumask_test_cpu(raw_smp_processor_id(), policy->cpus)) {
+ gpstates->timer.expires = jiffies + msecs_to_jiffies(1);
+ add_timer_on(&gpstates->timer, cpumask_first(policy->cpus));
+ spin_unlock(&gpstates->gpstate_lock);
+ return;
+ }

/*
* If PMCR was last updated was using fast_swtich then
@@ -718,10 +728,8 @@ void gpstate_timer_handler(struct timer_list *t)
if (gpstate_idx != gpstates->last_lpstate_idx)
queue_gpstate_timer(gpstates);

+ set_pstate(&freq_data);
spin_unlock(&gpstates->gpstate_lock);
-
- /* Timer may get migrated to a different cpu on cpu hot unplug */
- smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
}

/*
--
1.8.3.1
\
 
 \ /
  Last update: 2018-04-25 13:01    [W:0.064 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site