lkml.org 
[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings/display/bridge: sii902x: add optional power supplies
Date
Add optional power supplies using the description found in
"SiI9022A/SiI9024A HDMI Transmitter Data Sheet (August 2016)".

There is a single 1v2 supply voltage named vcc12 from which cvcc12
(digital core) and avcc12 (TMDS analog) are derived because according
to this data sheet:
"cvcc12 and avcc12 can be derived from the same power source"

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
Documentation/devicetree/bindings/display/bridge/sii902x.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 56a3e68ccb80..9fb41fc9af51 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -8,6 +8,8 @@ Optional properties:
- interrupts-extended or interrupt-parent + interrupts: describe
the interrupt line used to inform the host about hotplug events.
- reset-gpios: OF device-tree gpio specification for RST_N pin.
+ - iovcc-supply: I/O supply voltage (1.8V or 3.3V, host-dependent).
+ - vcc12-supply: TMDS analog & digital core supply voltage (1.2V).

Optional subnodes:
- video input: this subnode can contain a video input port node
--
2.15.1
\
 
 \ /
  Last update: 2018-04-25 09:55    [W:0.117 / U:2.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site