lkml.org 
[lkml]   [2018]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] drm/bridge: sii902x: add optional power supplies
Date
This patchset adds optional power supplies to the sii902x
drm bridge driver.

Version 2:
- merge avcc12 & cvcc12 to a single vcc12 supply as suggested by
Laurent Pinchart (see discussion details in
https://patchwork.freedesktop.org/patch/216058/)
- improve error messages following Laurent Pinchart comments.
- note about power consumption: as sii902x input IOs are not "io safe",
it is important to enable/disable voltage regulators during
probe/remove phases to avoid damages. Then, the only way to improve
the power consumption is to add the sii902x standy mode. My actual
platform is not an handheld device so power consumption is not
critical. But in the future, it could be nice to add the standby
mode, paying attention to wake-up events (hdmi cable plug)...

Version 1:
- Initial commit

Philippe Cornu (2):
dt-bindings/display/bridge: sii902x: add optional power supplies
drm/bridge: sii902x: add optional power supplies

.../devicetree/bindings/display/bridge/sii902x.txt | 2 ++
drivers/gpu/drm/bridge/sii902x.c | 38 +++++++++++++++++++---
2 files changed, 36 insertions(+), 4 deletions(-)

--
2.15.1

\
 
 \ /
  Last update: 2018-04-25 09:55    [W:0.079 / U:52.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site